Tip: use quotes for an exact phrase, e.g. "teacher education"
In this paper, the effect of welding parameters of rotary friction welding between AA6063 and AISI4130 and AA6063 and Copper are investigated. The major influencing parameters considered are upset pressure, friction time and friction…
Natural stone is a material that presents durableness over time and high aesthetic characteristic, but it is brittle and its tensile strength is significantly lower than compressive one: these peculiarities must be taken into account for…
This work aims to study the influence of protective coatings on the water absorption and mechanical properties of 3D printed poly–lactic acid (PLA) parts. The PLA parts were fabricated with different levels of the 3D printing process…
Ultra-high performance concrete (UHPC), a kind of composite material characterized by ultra high strength, high toughness and high durability. It has a wide application prospect in engineering practice. But there are some defects in…
The paper presents the results of experimental test of the fatigue of aluminium alloy type AlZn6Mg0,8Zr exposed to various low temperature thermomechanical treatment. Basquin’s characteristics of fatigue have been determined in mechanical…
The advances in the use of thermoelastic stress analysis (TSA) for fracture mechanics assessment are reviewed. The development of techniques to determine stress intensity factor is presented followed by the application of these techniques…
In this work two different titanium dental implants are analyzed in order to evaluate their mechanical strength. An ad-hoc designed experimental apparatus is prepared to test against fatigue these implants in a way that approximates as…
Mechanical processing of hole edges in large-size hull structures of single and double curvature for welding saturation parts into them is an urgent task of shipbuilding. A considerable amount of such machining has to be performed directly…
Basalt fabric composite, with different twill wave reinforcements, i.e. twill 2/2 and twill 1/3, have been studied in this work by means of experimental tests and numerical finite element (FE) simulations. As fabric reinforcements show…
Engineering components often contain notches, keyways or other stress concentration features. These features raise the stress state in the vicinity of their apex which can lead to unexpected failure of the component. The Theory of Critical…
In this paper the fatigue behaviour of a stainless steel AISI 304L is analysed. In the first part of the work the results obtained under constant amplitude fatigue are presented and synthesised in terms of both stress amplitude and energy…
The ? -TiAl based intermetallic alloys are interesting candidate materials for high-temperature applications with the efforts being directed toward the replacement of Ni-based superalloys. TiAl-based alloys are characterised by a density…
Mechanical components fabbricated with quenched and tempered steels, exhibiting mixed microstructures as derived from slant quench conditions, are frequently encountered in the industrial practice, owing to a tendency to employ quite low…
This paper discusses the phase shift effect occurring between two and more load channels of multiaxially loaded specimens. The discussion concludes that there is an extreme shortage of good experimental data that would prove the existence…
Titanium alloy (Ti-6Al-4V) having a bimodal “harmonic structure”, which consists of coarsegrained structure surrounded by a network structure of fine grains, was fabricated by mechanical milling (MM) and spark plasma sintering (SPS) to…
Dealing with composites in polymeric matrix, the pultruded ones are among the more suitable for large production rates and volumes. For this reason, their use is increasing also in structural applications in civil and mechanical…
In recent years, the use of natural fiber composites to provide a possible replacement for synthetic fiber composites for practical applications has been the subject of several studies. This study deals with the fabrication and…
In this study, a multi-parameter analysis, using Taguchi method for design of experiments, has been conducted to investigate the optimum curing conditions for GNPs/E-glass fabric/epoxy laminated nanocomposites. The independent variables in…
The use of carbon-fiber composite materials (CFRP) in critical cases implies an increase in the resistance to the stability of their mechanical properties. For the purpose of in-depth analysis of defects in the experiments, an integrated…
The purpose of this research is to separate different morphological particles of ASTM class F fly ash, and study their effect on mechanical behaviour and durability of high volume cementitious mixtures. In this research wet separation of…
The use of Areca sheath in developing a newer composite material is proposed in this article. The Areca sheath particulates are extracted by pulverizing long sheaths into different sizes of particulates and are reinforced into the epoxy to…
In the field of composite materials, extensive research has been undertaken on aluminum-graphite composites. However, a research gap has been identified regarding the specific influence of nano-sized graphite particles on their fracture…
Aluminum composites with varied weight percentages of 0-2.5 B4C particles and micro- and nanoparticle sizes were fabricated by stir-casting. The material's mechanical and wear characteristics were evaluated. We used dry pin-on-disc wear…
This study aims at assessing the impact of casting size on the bainitic transformation, resulting microstructures, and tensile properties of a high-carbon, high-silicon steel austempered at different temperatures. The casting size was…
The Equal Channel Angular Pressing is a hardening treatment with which ductile metals can beprocessed to refine their grain and sub-grain structure. This process enhances the mechanical strength of metalsin terms of tensile strength…
Magnetized water (MW) is one of the most effective and economical ways to improve the properties of self-compacting concrete (SCC). Therefore, the aim of this study is to improve the fresh, mechanical, and microstructural properties of SCC…
Concrete developed from light expanded clay aggregate (LECA) and glass fiber has good performance, durability, and sustainability. Towards this, the experimental investigation was designed to study cubes, cylinders, and simply supported…
In this work, numerical analyses on the Volterra’s ancient walls are performed to understand the causes of a collapse occurred after an extreme rainfall (2014) and to identify the mechanical parameters that most influenced it. The stretch…
This study investigates the physico-mechanical properties, mineralogical composition, deterioration processes, weathering patterns, and durability of building materials in the Ottoman Fort of Tamentfoust, Algiers, to inform heritage…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
In this study, in order to evaluate the effects of heavy vacuum slops (H.V.S) as rejuvenator and nano-Zycosil as an anti-stripping agent on used encapsulation method and mechanical performance of asphalt mixture samples, scanning electron…
Thanks to the progress of research on thermoplastic materials, the properties of composite materials have improved considerably. The aim of this study is the evaluation of fatigue strength of glass-fibre-reinforced polypropylene composite…
The valorization of local by-products in the manufacture of a new range of sand concrete and the improvement of their properties, will lead to seek an arrangement between performance and cost in order to achieve a resistant material. Waste…
As it is imperative to control the materials development processes well, in parallel, it will be necessary to constantly adapt very efficient assembly methods. Friction stir welding makes it much easier for us to fusion the aluminum alloys…
In recent decades, one can observe a great increase in the replacement of traditional materials with polymer composites in high-strength and lightweight applications. High fuel consumption by automobile and aerospace vehicles built from…
The modified disk shaped compact tension test is a configuration derived from standard compact tension test that is used for measuring fracture mechanical properties of primarily metallic materials. The compact tension configuration is…
In this study, the relationships between processing, structure and properties of self-reinforced ultra-high molecular weight polyethylene (UHMWPE) composites fabricated via thermal pressing are investigated. By systematically varying…
To evaluate the integrity of a structure consists to prove his ability to perform his mechanical functions for all modes of loading, normal or accidental, and throughout its lifespan. In the context of nuclear safety, for the most…
The paper details the studies carried out on a dual-size particulate composite prepared by stir casting using A 356 aluminum alloy and B4C powders. Three composite compositions, viz., A356 plus 2% B4C (44µm size and 105µm size in 1:1…
An experimental technique is presented to evaluate mechanical and thermal load-induced microstructural damage, based on the Electron Probe Micro-Analysis (EPMA) principle, by which certain analytical potentialities of Scanning Electron…
Additive manufacturing (AM) is revolutionizing various industries by enabling the creation of complex structures with minimal waste. In the context of a circular economy, the importance of recycling cannot be overstated, as it plays a…
Since the last two centuries, concrete has become the number one building material in the world. Therefore, we are interested in studying the mechanical behavior at failure of this material and calculate its toughness. In this paper, we…
Advanced polymer matrix composites are gaining the market in their way due to their exceptional specific stiffness, specific strength, fatigue, and corrosion resistance in the field of Auto-Tech, Aero-Tech, Biotech, etc. However, the lack…
The paper investigates the use of 3D-printed components made from Polylactic Acid (PLA) for the restoration of architectural and ornamental elements, focusing on architectural/structural components. The material PLA was chosen for its…
Increased material demand in all sectors is primarily due to exponential growth in population to fulfill human needs and comforts. Recycling of collected aluminium beverage cans and Al 6061 alloy scraps from industries ensures energy…
In the past five years, the implementation of machine learning (ML) techniques has surged in civil engineering applications, particularly for optimizing and predicting solutions to various challenges. More robust prediction models may be…
This work is about study of the mechanical behaviour of unidirectional Kevlar / Epoxy composite laminates according to different failure criteria. Varying strength parameters values, makes it possible to compare the ultimate mechanical…
Aluminium composites are extensively used in several industrial applications. The production of Metal Matrix Composite (MMCs) with varying wt. % of reinforcement/s leads to enhancement of wear and mechanical behavior. In the present work…
The selective laser melting (SLM) technology is widely used to manufacture 316L stainless steel (SS) components for industrial applications. To understand the microstructure and the mechanical properties of additively manufactured 316L…
In the present work, the influence of alloying elements, on the mechanical characteristics and wear behavior by modification of the chemical composition of the ductile iron was studied, in order to improve these characteristics for the…
