Abstract
In this paper the fatigue behaviour of a stainless steel AISI 304L is analysed. In the first part of the work the results obtained under constant amplitude fatigue are presented and synthesised in terms of both stress amplitude and energy released to the surroundings as heat by a unit volume of material per cycle, Q. Then some specimens have been fatigued in variable amplitude, two different load level tests: the first level was set higher while the second was lower than the constant amplitude fatigue limit. The Q values, evaluated during the second part of the fatigue test, have been compared with those calculated under constant amplitude fatigue at the same load level. The comparison allowed us to notice that the Q parameter is sensitive to the fatigue damage accumulated by the material during the first part of the fatigue test.
Article history
- ReceivedUntil the next stage: 0 days
- Accepted
How to cite
APA
Atzori, B., Meneghetti, G., & Ricotta, M. (2011). Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation. Fracture and Structural Integrity, 5(17), pages 15–22. https://doi.org/10.3221/IGF-ESIS.17.02
IEEE
B. Atzori, G. Meneghetti, and M. Ricotta, “Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation,” Fracture and Structural Integrity, vol. 5, no. 17, pp. pages 15–22, 2011, doi: 10.3221/IGF-ESIS.17.02.
MLA
Atzori, B., et al. “Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation.” Fracture and Structural Integrity, vol. 5, no. 17, 2011, pp. pages 15–22. https://doi.org/10.3221/IGF-ESIS.17.02.
Chicago
Atzori, B., G. Meneghetti, and M. Ricotta. 2011. “Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation.” Fracture and Structural Integrity 5 (17): pages 15–22. https://doi.org/10.3221/IGF-ESIS.17.02.
Harvard
Atzori, B., Meneghetti, G. and Ricotta, M. (2011) ‘Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation’, Fracture and Structural Integrity, 5(17), pp. pages 15–22. doi: 10.3221/IGF-ESIS.17.02.
Vancouver
Atzori B, Meneghetti G, Ricotta M. Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation. Fracture and Structural Integrity. 2011;5(17):pages 15-22. doi:10.3221/IGF-ESIS.17.02
BibTeX
@article{atzori2011,
author = {Atzori, B. and Meneghetti, G. and Ricotta, M.},
title = {Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation},
journal = {Fracture and Structural Integrity},
year = {2011},
volume = {5},
number = {17},
pages = {pages 15--22},
doi = {10.3221/IGF-ESIS.17.02},
url = {https://doi.org/10.3221/IGF-ESIS.17.02},
issn = {1971-8993}
}
RIS
TY - JOUR
AU - Atzori, B.
AU - Meneghetti, G.
AU - Ricotta, M.
TI - Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation
JO - Fracture and Structural Integrity
T2 - Fracture and Structural Integrity
PY - 2011
VL - 5
IS - 17
SP - pages 15
EP - 22
DO - 10.3221/IGF-ESIS.17.02
UR - https://doi.org/10.3221/IGF-ESIS.17.02
SN - 1971-8993
ER -
Licence
Copyright © 2014 Frattura ed Integrità Strutturale.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- B. Atzori, G. Meneghetti, B. Rossi, Resistenza a fatica di strutture in leghe di alluminio: normative a confronto e verifica sperimentale , Fracture and Structural Integrity: Vol 3 No 9 (2009): July 2009
- G. Meneghetti, A. Campagnolo, F. Berto, Some relationships between the peak stresses and the local strain energy density for cracks subjected to mixed-mode (I+II) loading , Fracture and Structural Integrity: Vol 9 No 33 (2015): July 2015
- G. Meneghetti, B. Atzori, A. Campagnolo, F. Berto, A link between the peak stresses and the averaged strain energy density for cracks under mixed-mode (I+II) loading , Fracture and Structural Integrity: Vol 9 No 34 (2015): October 2015
- B. Atzori, B. Rossi, G. Demelio, Effetto delle dimensioni del cordone di saldatura sulla resistenza a fatica dei giunti a croce , Fracture and Structural Integrity: Vol 3 No 9 (2009): July 2009
- G. Meneghetti, Utilizzo della tensione di picco per la verifica a fatica dei giunti saldati d’angolo con il metodo degli elementi finiti , Fracture and Structural Integrity: Vol 3 No 9 (2009): July 2009
- G. Meneghetti, M. Ricotta, B. Atzori, The specific heat loss combined with the thermoelastic effect for an experimental analysis of the mean stress influence on axial fatigue of stainless steel plain specimens , Fracture and Structural Integrity: Vol 8 No 30 (2014): October 2014
- G. Meneghetti, M. Ricotta, The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- G. Meneghetti, M. Ricotta, Experimental estimation of the heat energy dissipated in a volume surrounding the tip of a fatigue crack , Fracture and Structural Integrity: Vol 10 No 35 (2016): January 2016