Tip: use quotes for an exact phrase, e.g. "teacher education"
In mixed-mode conditions, the competing contribution of the different stress intensity factors predicts fracture initiation load as well as crack propagation direction. Commonly, mixed-mode fracture resistance is based on the assumption of…
Departing from pioneering Heyman modern rational investigations on the purely-rotational collapse mode of least-thickness circular masonry arches, the hypothesis that joint friction shall be high enough to prevent inter-block sliding is…
In this paper, the effect of welding parameters of rotary friction welding between AA6063 and AISI4130 and AA6063 and Copper are investigated. The major influencing parameters considered are upset pressure, friction time and friction…
The aim of the present research is to check the accuracy of the Modified Wöhler Curve Method (MWCM) in estimating the fatigue strength of friction stir (FS) welded tubular joints of Al 6082-T6 subjected to in-phase and out-of-phase…
Aircraft have been manufactured for decades using a wide variety of welding and joining techniques. There have been significant developments in techniques over the last 15–20 years. In civil aeronautical industry the main materials used for…
The influence of the joint line remnant (JLR) on tensile and fatigue fracture behaviour has been investigated in a friction stir welded Al-Mg-Sc alloy. JLR is one of the microstructural features formed in friction stir welds depending on…
Understanding the deformation response of the material involving thinning under small punch loading is vital to ensure structural integrity. This paper systematically investigates the effects of plastic hardening on the thinning process…
A recently proposed cohesive-zone model which effectively combines damage, friction and mechanical interlocking has been revisited and further validated by numerically simulating the pull-out test, from a concrete block, of a ribbed steel…
Friction stir spot welding (FSSW) is a very important part of conventional friction stir welding (FSW) which can be a replacement for riveted assemblies and resistance spot welding. This technique provides high quality joints compared to…
The friction stir welding FSW is a topical technique to date, either for experimental or numerical research topics. Based on the fact that the majority of the heat generated, comes from the contact between the workpiece and the shoulder…
The present paper investigates the accuracy of the Modified Wöhler Curve Method (MWCM) in estimating multiaxial fatigue strength of aluminium friction stir (FS) welded joints. Having developed a bespoke joining technology…
Friction joints are used in steel structures submitted to cyclic loading such as, for example, in steel and composite bridges, in overhead cranes, and in equipment subjected to fatigue. Slip-critical steel joints with preloaded bolts are…
A356-T6 cast aluminum alloy is a light weight structural material, but fatigue crack initiates and propagates from a casting defect leading to final fracture. Thus it is important to eliminate casting defects. In this study, friction stir…
In questo studio sono stati caratterizzati giunti Friction Stir Welding e Linear Friction Welding su compositi a matrice in lega di alluminio e rinforzo particellare ceramico. Il processo FSW è stato applicato a due compositi ottenuti con…
New biomedical supportive and lightweight structures require the creation of sustainable polymer composites of high strength and wear resistance. This research explores the use of alkali-treated pineapple leaf fiber (PALF) reinforced epoxy…
The concepts and inspiration of biological evolution in nature are used to create new and effective competing tactics in the burgeoning field of bio-inspired computing optimization algorithms. In the present work, nine specimens of similar…
During the braking phase, the heat produced by friction between pads and disc cannot be entirely dissipated. Consequently, the brake disc, especially if very hard braking occur, can accumulate large amounts of heat in a short time so…
A three-dimensional crack propagation simulation is performed by the Dual Boundary Element Method (DBEM). The Stress Intensity Factors (SIFs) along the front of a semi elliptical crack, initiated from the external surface of a hollow axle…
Among the various severe plastic deformation techniques, Equal Channel Angular Extrusion (ECAE) is a widely used method that introduces significant plastic deformation into a sample by forcing it through two intersecting channels, without…
In the present work, a new model of the FRP-concrete or masonry interface, which accounts for the coupling occurring between the degradation of the cohesive material and the FRP detachment, is presented; in particular, a coupled…
Machine Learning focuses on the study of algorithms that are mathematical or statistical in nature in order to extract the required information pattern from the available data. Supervised Machine Learning algorithms are further sub-divided…
The main objective of this study is to compare the mechanical strength of friction stir spot welded (FSSW) joints and adhesive bonded single lap ones. The present study aims to compare the morphology and strength of welded and adhesive…
A series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path and crack growth life – are measured and compared. It is observed that the cracks follow a curvature from a tensile to a…
This study examines the changes in microstructure and mechanical properties of friction stir-welded (FSW) dissimilar joints between AA2014-T6 and AA5052-H32 aluminium alloys, with an emphasis on optimizing tool rotation speed for enhanced…
An analytical model is developed to predict fatigue crack propagation rate under mode I loading in 2024 aluminum alloy with FSW HAZ material characteristics. Simulation of the HAZ local properties in parent 2024 AA was performed with…
In this research work by changing different parameters of soil foundation like density, cohesion and foundation depth and width of square foundation at angle of friction of 0° to 50° with increment of 5°, numerically safe bearing capacity…
The torsional fatigue behaviour of circumferentially notched specimens made of austenitic stainless steel, SUS316L, and carbon steel, SGV410, characterized by different notch root radii has been recently investigated by Tanaka. In that…
Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of…
The present paper deals with the modelling of the mechanical behaviour of masonry elements regarded as heterogeneous systems, made of mortar, bricks and interfaces. Thus, the adopted computational strategy consists in modelling the brick…
In this work, powder compaction process was investigated by using a numerical material model, which involves Mohr-Coulomb theory and an elliptical surface plasticity model. An effective algorithm was developed and implemented in the ANSYS…
The usage of rebars in construction is the most common method for reinforcing plain concrete and thus bridging the tensile stresses along the concrete crack surfaces. Usually design codes for modelling the bond behaviour of rebars and…
Welding is a technique of fusion joining the material involving a process of inter-molecular diffusion adhesion. Polymer welding is an assembly method among several known assembly techniques such as gluing. This welding process applies to…
Hydraulic hammers have been extensively applied to horizontal directional well drilling in hard rock formations. However, the service life of a hydraulic hammer is still unsatisfactory due to the heavy wear or abrasion of the horizontal…
This paper reports hardness testing conducted on welded butt joints by FSW and TIG welding process on similar and dissimilar aluminium alloys. FSW joints were produced for similar alloys of AA7075T651 and dissimilar alloys of AA7075T651…
A limit analysis method for masonry domes composed of interlocking blocks with non-isotropic sliding resistance is under development. This paper reports the first two steps of that work. It first introduces a revision to an existing limit…
Performance of Friction Stir Welding (FSW) as a solid-state process is approved in several engineering applications, especially aluminum industries. Identification of mechanical behavior of the associated welded zone is necessary due to…
The impact of n-B4C on the mechanical and tribological behavior of Al7075 particle reinforced composites were assessed by analyzing samples of the resultant nano-composites for micro-structure, hardness, tensile strength, and wear behavior…
This study, concerns the improvement of the hardness and resistance to wear of the Ti-6Al-4V alloy surface by means of thermochemical treatment, for obtaining coatings on the Ti-6Al-4V alloy gives performance of resistance to wear…
The present study focused on the evaluation of critical influencing parameters of the FSW of AA6061-T6 and AA2024-T351 alloys. The materials properties of AA6061-T6 are heat-treatable alloys possessing properties of good resistance to…
Tibia is one of the bones that often fracture, generally occurring due to a car accident, falling from high places, work accidents, and sports injuries. Internal fixation is one of the solutions to repair broken bones. In some cases…
The study investigates the application of fibre-reinforced polymer (FRP) composites in constructions of bridges. It highlights the main advantages of using FRP as a building material and points out its suitability for various structural…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
Fatigue takes a place more and more important in the design of structures, it remains a key point in the mechanical dimensioning of structures. The Friction Stir Welding (FSW) process is regarded today as the most promising alternative to…
The initial crack path is analysed in a fretting fatigue test with cylindrical contact, where there is a stress gradient and a multiaxial and non-proportional stress state. For this, a cylindrical pad is pressed, with a constant normal…
Using a finite element calculation code, this work analyses the influence of friction during a stamping test conducted on the AA6060 aluminium-based alloy. The study focuses on phenomena happening when the sheet necking appears. This…
It is well known that the reinforcement of the Soil is considered as a solution to its stability problems. This technique ameliorates the mechanical and physical comportment of the soil. Based on this, this research paper aims at…
Friction stir welding (FSW) is an extremely complex process because it depends on the intrinsic and extrinsic factors of the material under consideration. The purpose of the present work is to formulate a set of recommendations concerning…
This paper reports results of fatigue tests of friction stir welded (FSW) aluminium tubes. Relatively small 38 mm diameter tubes were used and hence an automated FSW process using a retracting tool was designed for this project, as the…
This paper assesses a hybrid bracing system involving concentric steel bracing in combination with friction dampers to improve seismic performance in steel moment frame buildings. Three prototype (5, 10, and 15 stories) steel moment frame…
Dissimilar friction stir welding joints are widely employed in the industrial field due to the excellent microstructural and mechanical properties of the resulting joints. Nevertheless, to further enhance the weld properties, the addition…
