Fracture and Structural Integrity e-ISSN 1971-8993 Open access
Advanced Manufacturing and Processing Vol. 14, No. 53 (2020)

Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints

Author and affiliation details
  • Paulo NB Reis Corresponding author C-MAST, Dep. of Electromechanical Engineering, University of Beira Interior, Covilhã, Portugal preis@ubi.pt
  • Ana Amaro University of Coimbra, CEMMPRE, Dep. of Mechanical Engineering, Portugal
  • Altino Loureiro University of Coimbra, CEMMPRE, Dep. of Mechanical Engineering, Portugal
DOI
10.3221/IGF-ESIS.53.10
Pages
124-133
Published
Licence
CC BY 4.0
Published inVol. 14, No. 53 (2020)Go to the issue

Abstract

The main objective of this study is to compare the mechanical strength of friction stir spot welded (FSSW) joints and adhesive bonded single lap ones. The present study aims to compare the morphology and strength of welded and adhesive bonded joints. The welded joints were done by friction stir spot welding and the adhesive bonded ones by the use of the adhesive Araldite 420 A/B. The produced joints were subjected to morphology and microstructure analyzes, microhardness tests, tensile-shear tests and local strain analyzes. The welded joints have higher strength than adhesive-bonded joints. However, this difference is insignificant, around 5%, which is covered by the standard deviation. The connection by FSSW proves to be an alternative to adhesive bonded joints, offering the same strength, but with the connection at isolated points, inducing local stress concentration.

Keywords

Article history

  1. ReceivedUntil the next stage: 0 days
  2. Revision requestedUntil the next stage: 88 days
  3. RevisedUntil the next stage: 0 days
  4. AcceptedUntil the next stage: 72 days
  5. Published

How to cite

APA

Reis, P. N., Amaro, A., & Loureiro, A. (2020). Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints. Fracture and Structural Integrity, 14(53), 124–133. https://doi.org/10.3221/IGF-ESIS.53.10

IEEE

P. N. Reis, A. Amaro, and A. Loureiro, “Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints,” Fracture and Structural Integrity, vol. 14, no. 53, pp. 124–133, 2020, doi: 10.3221/IGF-ESIS.53.10.

MLA

Reis, Paulo NB, et al. “Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints.” Fracture and Structural Integrity, vol. 14, no. 53, 2020, pp. 124–133. https://doi.org/10.3221/IGF-ESIS.53.10.

Chicago

Reis, Paulo NB, Ana Amaro, and Altino Loureiro. 2020. “Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints.” Fracture and Structural Integrity 14 (53): 124–133. https://doi.org/10.3221/IGF-ESIS.53.10.

Harvard

Reis, P.N., Amaro, A. and Loureiro, A. (2020) ‘Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints’, Fracture and Structural Integrity, 14(53), pp. 124–133. doi: 10.3221/IGF-ESIS.53.10.

Vancouver

Reis PN, Amaro A, Loureiro A. Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints. Fracture and Structural Integrity. 2020;14(53):124-133. doi:10.3221/IGF-ESIS.53.10

BibTeX

@article{reis2020, author = {Reis, Paulo NB and Amaro, Ana and Loureiro, Altino}, title = {Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints}, journal = {Fracture and Structural Integrity}, year = {2020}, volume = {14}, number = {53}, pages = {124--133}, doi = {10.3221/IGF-ESIS.53.10}, url = {https://doi.org/10.3221/IGF-ESIS.53.10}, issn = {1971-8993} }

RIS

TY - JOUR AU - Reis, Paulo NB AU - Amaro, Ana AU - Loureiro, Altino TI - Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2020 DA - 2020/07/19 VL - 14 IS - 53 SP - 124 EP - 133 DO - 10.3221/IGF-ESIS.53.10 UR - https://doi.org/10.3221/IGF-ESIS.53.10 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2020 Paulo NB Reis, Ana Amaro, Altino Loureiro.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)