Fracture and Structural Integrity e-ISSN 1971-8993 Open access
SI: Russian mechanics contributions for Structural Integrity Vol. 20, No. 77 (2026)

Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate

Author and affiliation details
  • Igor Zorin Corresponding author HSM lab, Center for Engineering Systems and Sciences, Skoltech, Moscow, Russia ORCID iD0000-0001-9349-2494 igor.zorin@skoltech.ru
  • Vladimir Pisarev The Zhukovsky Central Aero-Hydrodynamical Institute (TsAGI), Moscow, Russia
  • Svyatoslav Eleonsky The Zhukovsky Central Aero-Hydrodynamical Institute (TsAGI), Moscow, Russia ORCID iD0000-0003-4345-067X
  • Aleksandr Elkin Center for Material Technologies, Skoltech, Moscow, Russia; CASM&T, Moscow Aviation Institute, Moscow, Russia ORCID iD0000-0003-2157-3425
  • Galina Tyurina Laboratory of Accelerated Particles “LUCh”, NUST MISIS, Moscow, Russia ORCID iD0009-0004-1314-7826
  • Eugene Statnik HSM lab, Center for Engineering Systems and Sciences, Skoltech, Moscow, Russia; CASM&T, Moscow Aviation Institute, Moscow, Russia ORCID iD0000-0002-1105-9206
  • Alexey Salimon HSM lab, Center for Engineering Systems and Sciences, Skoltech, Moscow, Russia; CASM&T, Moscow Aviation Institute, Moscow, Russia ORCID iD0000-0002-9048-8083
  • Alexander Korsunsky HSM lab, Center for Engineering Systems and Sciences, Skoltech, Moscow, Russia; CASM&T, Moscow Aviation Institute, Moscow, Russia
DOI
10.3221/IGF-ESIS.77.01
Pages
1-12
Published
Licence
CC BY 4.0
Published inVol. 20, No. 77 (2026)Go to the issue

Abstract

Residual stress significantly influences the mechanical performance, fatigue resistance, and structural reliability of titanium alloys used in engineering applications. This study investigates the residual stress distribution induced by one-sided dimpling in Ti-6Al-4V alloy using a combined experimental–numerical approach. Localized plastic deformation produced by spherical indentation generates stress fields that are difficult to characterize with a single technique. Residual stresses in the plane were evaluated using Focused Ion Beam–Digital Image Correlation (FIB-DIC) and Electronic Speckle Pattern Interferometry (ESPI). To evaluate the residual stress through the sample thickness, the cross-section warp method was used, that analyze the warping (deplanation) of the cross-section after cutting and provides an alternative way to infer the internal stress distributions and complements existing measurement techniques. The results reveal compressive residual stresses near the dimpled surface and tensile stresses developing at greater depths due to elastic recovery and equilibrium constraints. Finite element simulations match the experimentally observed stress distributions and confirm the reliability of the proposed methodology. The validated finite element model provides a predictive framework for future studies, enabling systematic analysis of how indentation depth and the indenter diameter affect the magnitude and distribution of compressive residual stresses, and supporting the optimization of dimpling parameters for improved structural performance.

Keywords

Article history

  1. ReceivedUntil the next stage: 33 days
  2. RevisedUntil the next stage: 5 days
  3. AcceptedUntil the next stage: 11 days
  4. Published

Statements

Funding

Russian Ministry of Science and Higher Education, no. 075-15-2024-552

How to cite

APA

Zorin, I., Pisarev, V., Eleonsky, S., Elkin, A., Tyurina, G., Statnik, E., Salimon, A., & Korsunsky, A. (2026). Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate. Fracture and Structural Integrity, 20(77), 1–12. https://doi.org/10.3221/IGF-ESIS.77.01

IEEE

I. Zorin et al., “Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate,” Fracture and Structural Integrity, vol. 20, no. 77, pp. 1–12, 2026, doi: 10.3221/IGF-ESIS.77.01.

MLA

Zorin, Igor, et al. “Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate.” Fracture and Structural Integrity, vol. 20, no. 77, 2026, pp. 1–12. https://doi.org/10.3221/IGF-ESIS.77.01.

Chicago

Zorin, Igor, Vladimir Pisarev, Svyatoslav Eleonsky, Aleksandr Elkin, Galina Tyurina, Eugene Statnik, Alexey Salimon, and Alexander Korsunsky. 2026. “Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate.” Fracture and Structural Integrity 20 (77): 1–12. https://doi.org/10.3221/IGF-ESIS.77.01.

Harvard

Zorin, I., Pisarev, V., Eleonsky, S., Elkin, A., Tyurina, G., Statnik, E., Salimon, A. and Korsunsky, A. (2026) ‘Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate’, Fracture and Structural Integrity, 20(77), pp. 1–12. doi: 10.3221/IGF-ESIS.77.01.

Vancouver

Zorin I, Pisarev V, Eleonsky S, Elkin A, Tyurina G, Statnik E, et al. Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate. Fracture and Structural Integrity. 2026;20(77):1-12. doi:10.3221/IGF-ESIS.77.01

BibTeX

@article{zorin2026, author = {Zorin, Igor and Pisarev, Vladimir and Eleonsky, Svyatoslav and Elkin, Aleksandr and Tyurina, Galina and Statnik, Eugene and Salimon, Alexey and Korsunsky, Alexander}, title = {Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate}, journal = {Fracture and Structural Integrity}, year = {2026}, volume = {20}, number = {77}, pages = {1--12}, doi = {10.3221/IGF-ESIS.77.01}, url = {https://doi.org/10.3221/IGF-ESIS.77.01}, issn = {1971-8993} }

RIS

TY - JOUR AU - Zorin, Igor AU - Pisarev, Vladimir AU - Eleonsky, Svyatoslav AU - Elkin, Aleksandr AU - Tyurina, Galina AU - Statnik, Eugene AU - Salimon, Alexey AU - Korsunsky, Alexander TI - Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2026 DA - 2026/04/03 VL - 20 IS - 77 SP - 1 EP - 12 DO - 10.3221/IGF-ESIS.77.01 UR - https://doi.org/10.3221/IGF-ESIS.77.01 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2026 Igor Zorin, Vladimir Pisarev, Svyatoslav Eleonsky, Aleksandr Elkin; Galina Tyurina; Eugene Statnik, Alexey Salimon, Alexander Korsunsky.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)

1 2 > >>