Abstract
New data concerning the values of residual stresses that arise as a result of the contact interaction of a spherical indenter and a flat surface of composite plate have been obtained. The studies are performed for both static indentation and impact influence of a spherical indenter into a flat surface of coupons made of carbon fibre reinforced polymer with cross-ply stacking sequence. The high-quality interference fringe patterns, generated by through hole drilling in contact interaction zone, which are essential for residual stress deriving are visualized and quantitatively processed both inside and outside the contact dimple. The distributions of residual stresses obtained during static and impact contact interaction, which leads to the appearance of dimples of almost the same diameter, are compared. A comparison of the values of the principal residual stress components corresponding to the contact interaction of similar composite plates with a spherical impactor of different diameters for the same impact energy is presented. Several factors have been identified that relate the decrease in the residual strength of damaged specimens to the values of the residual stress components. Evaluation of the influence of coupon’s thickness as well as an impact energy level on the residual stress values inherent in the vicinity of contact dimple is presented.
Keywords
Article history
- ReceivedUntil the next stage: 0 days
- Revision requestedUntil the next stage: 50 days
- RevisedUntil the next stage: 6 days
- AcceptedUntil the next stage: 1 day
- Published
Statements
Funding
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
May be shared and adapted, provided appropriate credit is given. Copyright © 2025 Sviatoslav Eleonsky, Vladimir Pisarev, Yury Matvienko, Galina Gvozdeva.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Sviatoslav Eleonsky, Yury Matvienko, Vladimir Pisarev, Igor Odintsev, Quantitative description of low-cycle fatigue damage accumulation in contact interaction zone by local strain evolution , Fracture and Structural Integrity: Vol 16 No 62 (2022): October 2022
- Yury Matvienko, Vladimir Pisarev, Svyatoslav Eleonsky, The effect of low-cycle fatigue on evolution of fracture mechanics parameters in residual stress field caused by cold hole expansion , Fracture and Structural Integrity: Vol 13 No 47 (2019): January 2019
- Yury Matvienko, Comparison of the constraint parameters in elastic-plastic fracture mechanics , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Andrey Chernov, Sviatoslav Eleonsky, Vladimir Pisarev, Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data , Fracture and Structural Integrity: Vol 15 No 55 (2021): January 2021
- Sviatoslav Eleonsky, Vladimir Pisarev, Eugene Statnik, Alexey Salimon, Alexander Korsunsky, Residual stress determination by blind hole drilling and local displacement mapping in aluminium alloy aerospace components , Fracture and Structural Integrity: Vol 18 No 69 (2024): July 2024
- Sviatoslav Eleonsky, Vladimir Pisarev, Mikhail Zajtsev, Mikhail Zichenkov , Marat Abdullin, Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data , Fracture and Structural Integrity: Vol 15 No 56 (2021): April 2021
- Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev, Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method , Fracture and Structural Integrity: Vol 16 No 59 (2022): January 2022
- Sviatoslav Eleonsky, Vladimir Pisarev, Residual stresses caused by static and dynamic contact interaction of composite plate and steel spherical indenter , Fracture and Structural Integrity: Vol 19 No 71 (2025): January 2025
- Yury Matvienko, Nataliya Popova, Evgeny Morozov, Predicting the crack path in a wedge under a concentrated tensile force by means of variational principle , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Igor Zorin, Vladimir Pisarev, Svyatoslav Eleonsky, Aleksandr Elkin, Galina Tyurina, Eugene Statnik, Alexey Salimon, Alexander Korsunsky, Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate , Fracture and Structural Integrity: Vol 20 No 77 (2026): July 2026