Fracture and Structural Integrity e-ISSN 1971-8993 Open access
SI: IGF26 - 26th International Conference on Fracture and Structural Integrity Vol. 16, No. 59 (2022)

Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method

Author and affiliation details
  • Sviatoslav Eleonsky Corresponding author Central Aero-Hydrodynamics Institute named after Prof. N.E. Zhukovsky (TsAGI). 1 Zhukovsky Street, Zhukovsky 140180 Moscow Region, Russia. ORCID iD0000-0003-4345-067X juzzepka@mail.ru
  • Yuri Matvienko Mechanical Engineering Research Institute of the Russian Academy of Science (IMASH RAN). 4 M. Kharitonievsky Per., 101990 Moscow, Russia. ORCID iD0000-0002-3189-1438
  • Vladimir Pisarev Central Aero-Hydrodynamics Institute named after Prof. N.E. Zhukovsky (TsAGI). 1 Zhukovsky Street, Zhukovsky 140180 Moscow Region, Russia.
  • Michael Zajtsev Central Aero-Hydrodynamics Institute named after Prof. N.E. Zhukovsky (TsAGI). 1 Zhukovsky Street, Zhukovsky 140180 Moscow Region, Russia.
DOI
10.3221/IGF-ESIS.59.09
Pages
115-128
Published
Licence
CC BY 4.0
Published inVol. 16, No. 59 (2022)Go to the issue

Abstract

The novel destructive method is implemented for quantitative assessment of fatigue damage accumulation in the stress concentration zone accompanied by residual stress due to cold expansion of the through-thickness hole. Damage accumulation is reached by preliminary cyclic loading of plane specimens with cold-expanded holes. Narrow notches, emanating from the hole edge at different stages of high-cycle fatigue, serve to manifest a damage level. These notches are inserted without applying external load. Deformation response to local material removing, caused by pure residual stress influence, is measured by electronic speckle pattern interferometry (ESPI) in terms of in-plane displacement components. Normalized values of the notch mouth open displacement (NMOD), in-plane displacement component at the initial point of the notch acting in the notch direction (U0), in-plane displacement component at the final point of the notch acting in the notch direction (U1) and the stress intensity factor (SIF) are used as current damage indicators. Numerical integration of curves, describing an evolution of each fracture mechanics parameter over lifetime, produces the damage accumulation function in an explicit form. It is established that all four fracture mechanics parameters give very close results.

Keywords

Article history

  1. ReceivedUntil the next stage: 1 day
  2. AcceptedUntil the next stage: 63 days
  3. Published

Statements

Funding

The authors acknowledge the support of the Russian Science Foundation (project N 18-19-00351).

How to cite

APA

Eleonsky, S., Matvienko, Y., Pisarev, V., & Zajtsev, M. (2021). Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method. Fracture and Structural Integrity, 16(59), 115–128. https://doi.org/10.3221/IGF-ESIS.59.09

IEEE

S. Eleonsky, Y. Matvienko, V. Pisarev, and M. Zajtsev, “Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method,” Fracture and Structural Integrity, vol. 16, no. 59, pp. 115–128, 2021, doi: 10.3221/IGF-ESIS.59.09.

MLA

Eleonsky, Sviatoslav, et al. “Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method.” Fracture and Structural Integrity, vol. 16, no. 59, 2021, pp. 115–128. https://doi.org/10.3221/IGF-ESIS.59.09.

Chicago

Eleonsky, Sviatoslav, Yuri Matvienko, Vladimir Pisarev, and Michael Zajtsev. 2021. “Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method.” Fracture and Structural Integrity 16 (59): 115–128. https://doi.org/10.3221/IGF-ESIS.59.09.

Harvard

Eleonsky, S., Matvienko, Y., Pisarev, V. and Zajtsev, M. (2021) ‘Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method’, Fracture and Structural Integrity, 16(59), pp. 115–128. doi: 10.3221/IGF-ESIS.59.09.

Vancouver

Eleonsky S, Matvienko Y, Pisarev V, Zajtsev M. Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method. Fracture and Structural Integrity. 2021;16(59):115-128. doi:10.3221/IGF-ESIS.59.09

BibTeX

@article{eleonsky2021, author = {Eleonsky, Sviatoslav and Matvienko, Yuri and Pisarev, Vladimir and Zajtsev, Michael}, title = {Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method}, journal = {Fracture and Structural Integrity}, year = {2021}, volume = {16}, number = {59}, pages = {115--128}, doi = {10.3221/IGF-ESIS.59.09}, url = {https://doi.org/10.3221/IGF-ESIS.59.09}, issn = {1971-8993} }

RIS

TY - JOUR AU - Eleonsky, Sviatoslav AU - Matvienko, Yuri AU - Pisarev, Vladimir AU - Zajtsev, Michael TI - Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2021 DA - 2021/12/22 VL - 16 IS - 59 SP - 115 EP - 128 DO - 10.3221/IGF-ESIS.59.09 UR - https://doi.org/10.3221/IGF-ESIS.59.09 SN - 1971-8993 ER -

Licence

Creative Commons Attribution 4.0 International

May be shared and adapted, provided appropriate credit is given. Copyright © 2021 Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)