Abstract
Localized displacement measurements based on electronic speckle-pattern interferometry are used to obtain crack mouth opening displacement (CMOD), stress intensity factor (SIF) and T-stress values during crack growth around cold-expanded holes. The specimens with a central open hole are made from 2024 aluminium alloy. The expansion level is 5% of nominal interference. The results are obtained for the same stress range = 350 MPa, but different stress ratio R = –0.4 and R = –1.0. A sequence of narrow notches, inserted under the constant external load, serves for crack modelling at different stages of cyclic loading. Initial experimental data represent in-plane displacement component values measured in the vicinity of the crack tip. The transition from in-plane displacement components to SIF and T-stress values follows from the relationships of modified version of the crack compliance method. The crack length curves of CMOD, SIF and T-stress profiles are obtained for different stages of cyclic loading. These data provide the construction of dependencies of fracture mechanics parameters for cracks of fixed lengths from the loading cycle number.
Keywords
Article history
- ReceivedUntil the next stage: 74 days
- Revision requestedUntil the next stage: 5 days
- AcceptedUntil the next stage: 6 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2019 Yury Matvienko, Vladimir Pisarev, Svyatoslav Eleonsky.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Sviatoslav Eleonsky, Yury Matvienko, Vladimir Pisarev, Igor Odintsev, Quantitative description of low-cycle fatigue damage accumulation in contact interaction zone by local strain evolution , Fracture and Structural Integrity: Vol 16 No 62 (2022): October 2022
- Yury Matvienko, Comparison of the constraint parameters in elastic-plastic fracture mechanics , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Andrey Chernov, Sviatoslav Eleonsky, Vladimir Pisarev, Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data , Fracture and Structural Integrity: Vol 15 No 55 (2021): January 2021
- Sviatoslav Eleonsky, Vladimir Pisarev, Eugene Statnik, Alexey Salimon, Alexander Korsunsky, Residual stress determination by blind hole drilling and local displacement mapping in aluminium alloy aerospace components , Fracture and Structural Integrity: Vol 18 No 69 (2024): July 2024
- Sviatoslav Eleonsky, Vladimir Pisarev, Yury Matvienko, Galina Gvozdeva , Influence of contact interaction character on residual stresses arising over damaged area in composite plate , Fracture and Structural Integrity: Vol 19 No 73 (2025): July 2025
- Sviatoslav Eleonsky, Vladimir Pisarev, Mikhail Zajtsev, Mikhail Zichenkov , Marat Abdullin, Residual stresses near cold-expanded hole at different stages of high-cycle fatigue by crack compliance data , Fracture and Structural Integrity: Vol 15 No 56 (2021): April 2021
- Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev, Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method , Fracture and Structural Integrity: Vol 16 No 59 (2022): January 2022
- Sviatoslav Eleonsky, Vladimir Pisarev, Residual stresses caused by static and dynamic contact interaction of composite plate and steel spherical indenter , Fracture and Structural Integrity: Vol 19 No 71 (2025): January 2025
- Yury Matvienko, Nataliya Popova, Evgeny Morozov, Predicting the crack path in a wedge under a concentrated tensile force by means of variational principle , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Igor Zorin, Vladimir Pisarev, Svyatoslav Eleonsky, Aleksandr Elkin, Galina Tyurina, Eugene Statnik, Alexey Salimon, Alexander Korsunsky, Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate , Fracture and Structural Integrity: Vol 20 No 77 (2026): July 2026