Reliability and Life Extension of Components

All Items

• The “Projection-by-Projection” (PbP) criterion for multiaxial random fatigue loadings Guidelines to practical implementation

  Denis Benasciutti, Davide Zanellati, Alessandro Cristofori

  348-366

• A probabilistic fatigue crack growth life approach to the definition of inspection intervals for railway axles

  C. Mallor, S. Calvo, J.L. Nuñez, R. Rodriguez-Barrachina, A. Landaberea

  359-373

• Analysis of strengthened short deficient rubberized concrete-filled steel tubular columns

  Fady Elshazly, Suzan Mustafa, Hesham Fawzy

  1-19

• An Applicability of Vyalov’s equations to ice wall strength estimation

  Anastasiya Kostina, Maxim Zelnin, Oleg Plekhov, Ivan Panteleev, Lev Levin, Michail Semin

  394-405

• Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L

  Gabriel Giannini de Cunto, Arnaldo Homobono Paes de Andrade, Waldemar Alfredo Monteiro

  Pages 332-338

• Assessment of the strength reliability of high-temperature heat exchangers with long service life at the design stage

  Vyacheslav Popov, V.V. Kashelkin, A.S. Demidov

  136-144

• Behavior of steel columns with double curvature: a numerical simulation and design-oriented parametric study

  Hamda Guedaoura, Mohammed Benzerara, Nadia Gouider, Yazid Hadidane, Anfel Chaima Hadidane

  171-192

• Comparison of two multiaxial fatigue models applied to dental implants

  JM. Ayllon, C Navarro, J. Vázquez, J. Domínguez

  pages 415-426

• Composite lay-up configuration effect on double and single sided bonded patch repairs

  Toufik Achour, Fayçal Mili

  327-337

• Considerations over the Italian road bridge infrastructure safety after the Polcevera viaduct collapse: past errors and future perspectives

  Fabio Bazzucchi, Luciana Restuccia, Giuseppe Ferro

  400-421

• Continuum damage modeling through theoretical and experimental pressure limit formulas

  Fatima Majid, Mohamed Elghorba

  Pages 79-89

• Crack initiation behavior of notched specimens on heat resistant steel under service type loading at high temperature

  Lu Cui, Peng Wang

  Pages 26-35

• Damage of additively manufactured polymer materials: experimental and probabilistic analysis

  Taoufik Hachimi, Fouad Ait Hmazi, Fatima Majid

  236-255

• Dynamic damage analysis of carbon fiber reinforced polymer composite pressure vessels

  Kamal M. Hammad, Iuliia A. Sadykova, Eugene N. Prokopev, Galina V. Tyurina, Semen D. Ignatyev, Eugene S. Statnik

  321-341

• Effect of date palm and polypropylene fibers on the characteristics of self-compacting concretes: comparative study

  Dounia Derdour, Mourad Behim, Mohammed Benzerara

  31-50

• Effect of parent concrete strength on recycled concrete performance

  Bachir Kebaili, Mohammed Benzerara, Souad Menadi, Nadia Kouider, Redjem Belouettar

  14-25

• Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA

  Carlos Vicente, João Fernandes, Augusto Deus, Maria Vaz, Marco Leite, Luis Reis

  748-756

• Effect of shape factor on structural reliability analysis of a surface cracked pipeline-parametric study

  Abdelkader Guillal, Noureddine Abdelbaki, Pr, Mohamed el Amine Bensghier, dr, Bogdan Kopei, Dr, Mourad Bettayeb, Dr

  341-349

• Enhancing Generalizability of a Machine Learning Model for Infrared Thermographic Defect Detection by Using 3D Numerical Modeling

  Vladimir Vavilov, Arsenii Chulkov, Alexey Moskovchenko

  177-191

• Environmental effects on the reliability of an AISI 304 structure

  Racim Boutelidja, Abdelmoumene Guedri, Mohammed Amine Belyamna, Bachir Merzoug

  98-111

• Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition

  Takahiro Morishita, Fumio Ogawa, Takamoto Itoh

  Pages 45-53

• Evolution of prototyping in automotive engineering: a Comprehensive Study on the reliability of Additive Manufacturing for advanced powertrain components

  Silvia Cecchel, Riccardo Ferraresi, Matteo Magni, Leonardo Guerini, Giovanna Cornacchia

  109-126

• Experimental and numerical analyses of stiffness and fatigue properties of a spring element for mounts with tunable stiffness made of C85S+QT sheet steel

  Volker Landersheim, Cedric Mathieu, Jan Hansmann, William Kaal

  297-314

• Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses

  Faycal Slimani, Mohammed Benzerara, Messaoud Saidani

  107-125

• Fatigue characterization of a crankshaft steel: Use and interaction of new models

  Sergio Blasón, Cristina Rodríguez, Alfonso Fernández-Canteli

  pages 187-195

• Fatigue life assessment of thin-walled welded joints under non-proportional load-time histories by the shear stress rate integral approach

  A. Bolchoun, C. M. Sonsino, H. Kaufmann, T. Melz

  Pages 162-169

• Fatigue life prediction of pedicle screw for spinal surgery

  Š. Major, V. Kocour, P. Cyrus

  pages 379-388

• Fatigue methodology for life predictions for the wheel-rail contact area in large offshore turret bearings

  T. Lassen, Z. Mikulski

  Pages 54-60

• Fatigue properties and fracture mechanism of load carrying type fillet joints with one-sided welding

  Takamasa Abe, Hiroyuki Akebono, Masahiko Kato, Atsushi Sugeta

  pages 196-205

• Fatigue Strength Analysis of Bogie Frame In Consideration of Parameter Uncertainty

  Bingzhi Chen, Pengpeng Zhi, Yonghua Li

  385-399

• Finite Element analysis of stress state in the cement of total hip prosthesis with elastomeric stress barrier

  Allaoua Fadela , Lebbal Habib, Belarbi Abderrahmane

  281-290

• Flexural behavior of delta and bi-delta cold-formed steel beams: experimental investigation and numerical analysis

  Yazid Hadidane, Nadia Kouider, Mohammed Benzerara

  69-88

• Fragility analysis of concrete elevated water tanks under seismic loads

  Hocine Hammoum, Amar Aliche, Karima Bouzelha, Younes Aoues, Ouali Amiri, Youcef Mehani

  93-113

• High-quality nodule analysis in spheroidal graphite cast iron using X-ray micro-computed tomography

  Juan Toledo, Felipe Diaz, Matías Peralta, Diego Fernandino

  279-288

• Hybrid feedforward neural network for pressure vessel internal corrosion prediction: integrating chemical models with inspection data for structural integrity assessment

  Mina Pascal

  49-66

• Influence of the stress gradient on the fatigue life calculation of a martensitic high strength steel

  Igor Miloševic, Gerhard Winter, Florian Grün, Martin Kober

  Pages 1-8

• Kinetics of fatigue crack growth and crack paths in the old puddled steel after 100-years operating time

  G. Lesiuk, M. Szata

• Leak-Before-Break methodology applied to different piping materials: a performance evaluation

  Israel Gleybson Ferreira da Silva, Arnaldo Homobono Paes de Andrade, Waldemar Alfredo Monteiro

  46-53

• Mechanical behavior of fiber-glass plastic with hole pattern using digital image correlation and acoustic emission methods

  Elena Strungar, Dmitrii Lobanov, Ekaterina Chebotareva, Yaroslava Kochneva

  63-76

• Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

  Sari Sharif Ali, Mahyar Arabani, Hassan Latifi

  187-197

• Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance Effect of the composite patch shape on the repair performance.

  Mohammed Baghdadi, Boualem Serier, Mokadem Salem, Bouchra Zaoui, Khacem Kaddouri

  68-85

• Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

  M. Leitner, F. Grun, Z. Tuncali, R. Steiner, W. Chen

  Pages 47-53

• Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate

  Igor Zorin, Vladimir Pisarev, Svyatoslav Eleonsky, Aleksandr Elkin; Galina Tyurina; Eugene Statnik, Alexey Salimon, Alexander Korsunsky

  1-12

• Numerical Cohesive Zone Modeling (CZM) of Self-Anchoring AM Metal-CFRP joints

  Fikret Enes Altunok , Giorgio De Pasquale

  280-295

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  26-53

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  91-106

• Optimization of austenitic and ferritic steels for deep drawing. Part 1: metallurgical and mechanical analyses.

  Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Gerosa, Barbara Rivolta

  104-123

• Predicting Damage in Notched Functionally Graded Materials Plates through extended Finite Element Method based on computational simulations

  Hakim Siguerdjidjene, Amin Houari, Kouider Madani, Salah Amroune, Mohamed Mokhtari, Barhm Mohamad, Chellil Ahmed, Abdelkrim Merah, Raul Campilho

  1-23

• Predicting the strength of 3D-printed conductive composite under tensile load: A probabilistic modeling and experimental study

  Nassima Naboulsi, Fatima Majid, Taoufik Hachimi, Najoua Barhoumi, Kaouthar Khlifi, Soufyan Dadoun

  247-262

• Prediction and optimizing residual stress profile induced by cold expansion in aluminum alloys using experimental design

  Abdelkader Miloudi, M. Laredj, A. Lousdad, B. Benguediab

  193-207