Analytical, computational and physical Models

All Items

• The “Projection-by-Projection” (PbP) criterion for multiaxial random fatigue loadings Guidelines to practical implementation

  Denis Benasciutti, Davide Zanellati, Alessandro Cristofori

  348-366

• 2D mapping of plane stress crack-tip fields following an overload

  P. J. Withers, P. Lopez-Crespo, M. Mostafavi, A. Steuwer, J. F. Kelleher, T. Buslaps

  pages 151-158

• 3D crack identification using the Nelder-Mead Simplex algorithm combined with a random generation of crack positions

  Nasreddine Amoura, Hocine Kebir; Abdelouahab Benzerdjeb

  243-255

• 3D Stress intensity factor and T-stresses (T11 and T33) formulations for a Compact Tension specimen

  S. K. Kudari, K. G. Kodancha

  Pages 216-225

• A 3D mixed frame element with multi-axial coupling for thin-walled structures with damage

  D. Addessi, P. Di Re

  pages 178-195

• A closed form for the Stress Intensity Factor of a small embedded square-like flaw

  Paolo Livieri, Fausto Segala

  182-191

• A comparison between S-N Logistic and Kohout-Věchet formulations applied to the fatigue data of old metallic bridges materials

  Joelton Fonseca Barbosa, José A.F.O. Correia, Pedro Montenegro, Raimundo Carlos Silverio Freire Júnior, Grzegorz Lesiuk, Abílio M.P. De Jesus, Rui A.B. Calçada

  400-410

• A comparison of methods for calculating notch tip strains and stresses under multiaxial loading

  M. Lutovinov, J. ?erný, J. Papuga

  Pages 237-243

• A consistency assessment of coupled cohesive zone models for mixed-mode debonding problems

  R. Dimitri, M. Trullo, G. Zavarise, L. De Lorenzis

  pages 266-283

• A consistent use of the Gurson-Tvergaard-Needleman damage model for the R-curve calculation

  Gabriele Cricrì

  Pages 161-174

• A data fusion based approach for damage detection in linear systems

  Ernesto Grande, Maura Imbimbo

  pages 325-333

• A finite-element approach for the analysis of pin-bearing failure of composite laminates

  Michele Marino, Francesca Nerilli, Giuseppe Vairo

  pages 241-250

• A four-parameters model for fatigue crack growth data analysis

  M. Grasso, F. Penta, P. Pinto, G.P. Pucillo

  Pages 69-79

• A link between the peak stresses and the averaged strain energy density for cracks under mixed-mode (I+II) loading

  G. Meneghetti, B. Atzori, A. Campagnolo, F. Berto

• A mechanical model for FRP-strengthened beams in bending

  S. Bennati, N. Dardano, P. S. Valvo

  pages 39-55

• A method for rapid estimation of residual stresses in metal samples produced by additive manufacturing

  Alexey Fedorenko, Denis Firsov, Stanislav Evlashin, Boris Fedulov, Evgeny Lomakin

  267-279

• A micropolar model for the analysis of dispersive waves in chiral mass-in-mass lattices

  A. Bacigalupo, L. Gambarotta

  pages 1-8

• A model to quantify fatigue crack growth by cyclic damage accumulation calculated by strip-yield procedures

  Samuel Elias Ferreira, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro

  Pages 129-138

• A new approach of CMT seam welding deformation forecasting based on GA-BPNN

  Yao Lu, Yanfeng Xing, Xuexing Li, Sha Xu

  325-336

• A new formulation for estimating maximum stress intensity factor at the mid plane of a SENB specimen: Study based on 3D FEA

  S. K. Kudari, K. G. Kodancha

  pages 419-425

• A new micromechanical model of CNT-metal nanocomposites with random clustered distribution of CNTs

  Chongyang Gao, Yu Lu, Y.T. Zhu

  pages 471-484

• A New Viscoelastic Mechanics Model for the Creep Behaviour of Fibre Reinforced Asphalt Concrete

  Chunshui Huang, Fangtao Wang, Tao Gao, Danying Gao

  108-120

• A non-linear procedure for the numerical analysis of crack development in beams failing in shear

  P. Bernardi, R. Cerioni, E. Michelini, A. Sirico

  pages 98-107
• 

  A nonlinear elasto-plastic analysis of Reissner-Mindlin plates by finite element method

  Kamel Meftah, Lakhdar Sedira

  276-285

• A Novel Method to Estimate the Damage Severity Using Spatial Wavelets and Local Regularity Algorithm

  Mallikarjuna Reddy, Arun Kumar K

  36-55

• A numerical and experimental study through laser thermography for defect detection on metal additive manufactured parts

  N. Montinaro, D. Cerniglia, G. Pitarresi

  Pages 231-240

• A numerical framework for simulating fluid-structure interaction phenomena

  A. De Rosis, S. de Miranda, C. Burrafato, F. Ubertini

  pages 343-350

• A numerical model based on ALE formulation to predict crack propagation in sandwich structures

  Marco Francesco Funari, Fabrizio Greco, Paolo Lonetti, Saverio Spadea

  277-293

• A numerical study of non-linear crack tip parameters

  F.V. Antunes, R. Branco, L. Correia, AL Ramalho

  pages 199-208

• A numerical study of squeeze-film damping in MEMS-based structures including rarefaction effects

  Maria F. Pantano, Leonardo Pagnotta, Salvatore Nigro

  Pages 103-113

• A numerical study of two different specimen fixtures for the modified compact tension test – their influence on concrete fracture parameters

  T. Holušová, H. Cifuentes, A. Fernández-Canteli, S Seit

  pages 242-249

• A Numerical Study on Predicting Bond-Slip Relationship of Reinforced Concrete using Surface Based Cohesive Behavior

  Minhajul Bari Prince, Debasish Sen

  154-180

• A robust approach for the determination of Gurson model parameters

  R. Sepe, G. Lamanna, F. Caputo

  369-381

• A Simple and Efficient eight node Finite Element for Multilayer Sandwich Composite Plates Bending Behavior Analysis

  Khmissi Belkaid, Nadir Boutasseta, Hamza Aouaichia, Djamel Eddine Gaagaia, Adel Deliou, Badreddine Boubir

  372-393

• A simple beam model to analyse the durability of adhesively bonded tile floorings in presence of shrinkage

  S. de Miranda, A. Palermo, F. Ubertini

  pages 293-301

• A simple model to calculate the microstructure evolution in a NiTi SMA

  Vittorio Di Cocco, Stefano Natali

  173-182

• A simplified constitutive model for a SEBS gel muscle simulant - Development and experimental validation for finite elements simulations of handgun and rifle ballistic impacts

  Riccardo Andreotti, Valentina Leggewri, Andrea Casaroli, Mauro Quercia, Cristian Bettin, Mauro Zanella, Marco V. Boniardi

  176-197

• A statistically self-consistent fatigue damage accumulation model including load sequence effects under spectrum loading

  Chen Xianmin, Sun Qin, Dui Hongna, Fan Junling

  Pages 319-330

• A study of the stored energy in titanium under deformation and failure using infrared data

  A.Yu. Fedorova, M.V. Bannikov, O.A. Plekhov

  Pages 81-88

• A study on the crack presence effect on dynamical behavior of higher-order Quasi-3D composite steel-polymer concrete box section beams via DQFEM

  Nassim Laouche, Ahmed Saimi, Ismail Bensaid, Mouloud Dahmane, Hassen Ait Atmane

  88-107

• A theoretical model for predicting the Peak Cutting Force of conical picks

  Gao Kuidong, Du Changlong, Jiang Hongxiang, Liu Songyong

  pages 43-52

• A two-step multiaxial racetrack filter algorithm for non-proportional load histories

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu

  Pages 1-7

• A unified approach for static and dynamic fracture failure in solids and granular materials by a particle method

  Roberto Brighenti, Andrea Carpinteri, Nicholas Corbari

• A unified rule to estimate multiaxial elastoplastic notch stresses and strains under in-phase proportional loadings

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha, Luiz Fernando Nazaré Marques

  Pages 128-134

• A viscoelastic-viscoplastic model for a thermoplastic and sensitivity of its rheological parameters to the strain-rate

  Younès Saadallah, Semcheddine Derfouf, Belhi Guerira

  666-675

• Acoustic Analysis Using Symmetrised Implicit Midpoint Rule

  Noorhelyna Razali, Nisa Balqis Masnoor, Shahrum Abdullah, Muhammad Faiz Hilmi Mohd Zainaphi

  214-229

• Acoustic emission characteristics of instability process of a rock plate under concentrated loading

  S.R. Wang, C.Y. Li, Z.S. Zou, X.L. Liu

  Pages 182-190

• Advanced algorithms for early detection of first damage during static tensile tests

  Davide D'Andrea, Danilo D'Andrea, Giacomo Risitano, Dario Santonocito

  294-309

• Algorithm for automatic fatigue crack growth simulation on welded high strength steels

  Ricardo Miguel Gomes Simões Baptista, Virginia Infante, João Marques

  257-268

• Algorithms for calculation damage processes

  Aleksandr Dmitrievich Nikitin, Nikolay G. Burago, Ilia S. Nikitin, Boris A. Stratula

  212-224