Tip: use quotes for an exact phrase, e.g. "teacher education"
The present study investigates the influence of corrosion exposure on the fatigue behavior of S460NL high-strength structural steel, a material that is frequently utilized in offshore and civil engineering structures. Accelerated corrosion…
This work analyses the results of a simple forming process of an AA6060 aluminium alloy sheet in order to validate the development of a simulation model based on the finite element method (FEM). This work represents the starting point of a…
In the present paper the design and construction choices of a test field for the ballast lateral resistance measurement, in order to produce data useful for the development of a numerical model able to simulate the service critical…
In the present work we present some results of numerical experiments obtained with a variational model for quasi-static Griffith-type brittle fracture. Essentially the analysis is based on a recent formulation by Francfort and Marigo the…
The contribution describes the fatigue lifetime predictions of polyethylene notched specimens based on the theory of critical distance. The approach uses the line method, which averages the axial stress over the critical distance. The…
Machining with a cutting edge with extensive damage or a fractured cutting edge significantly influences the machining performance. Therefore, investigations on tool wear behavior, their forms, and wear mechanisms will be very helpful in…
Given the field of application and the many advantages, the use of FGM (Functionally Graded Materials) materials has recently been extended in several components and more particularly in cylindrical structures, which have been the subject…
In order to solve the technical problem of damage localization in the concrete damage process, the Computerized Tomography (CT) scanning test and Acoustic Emission (AE) damage localization test was carried out under uniaxial compression.…
Reliable discrimination of small damage states under operational variability requires uncertainty aware Structural Health Monitoring. A pipeline is presented that couples guided wave physics with supervised machine learning to classify…
The Hercílio Luz suspension bridge, built in 1926, has been out of service since 1991 due to high corrosion levels and structural element impairment. A complete rehabilitation project was developed which included the replacement of the…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
The near surface mounted (NSM) method of inserting fiber reinforced polymer (FRP) elements (rods or lamina) into notches has been shown to be a good way for restoring reinforced concrete (RC) elements. The knowledge about the use of…
The two main research orientations on the problem of hydrogen embrittlement are examined: the study of fundamental principles and the disclosure of micromechanisms and the relation between hydrogen embrittlement and metal aging; the…
A series of strain-controlled multiaxial low cycle fatigue (LCF) tests under proportional and non-proportional loading conditions have been conducted on notched specimens. Cylindrical bars of Al 6061 aluminum alloy and AISI 316L stainless…
Residual stress significantly influences the mechanical performance, fatigue resistance, and structural reliability of titanium alloys used in engineering applications. This study investigates the residual stress distribution induced by…
A large number of mechanical components are subjected to fatigue loading beyond 106 cycles. The VHCF behaviour of smooth specimens has been extensively investigated in the recent years, even if more efforts are necessary to reveal the…
Since the end of the last century a lot of research on ductile damaging and fracture process has been carried out. The interest and the attention on the topic are due to several aspects. The margin to reduce the costs of production or…
The volume fraction effect of carbon fiber in an epoxy matrix in the vicinity of the notch on the traction and torsion behavior were studied. This volume fraction which increases with the reduction of the thickness is a parameter which…
Plastic η factor is adopted to account crack tip plasticity while evaluating the fracture toughness of the materials as per ASTM E1820. It is valid only for homogeneous materials. The plastic η factor for compact tension geometry (CT) with…
The use of temporary hip prosthesis made of orthopedic cement (spacer) in conjunction with antibiotics became a prevalent method used for prosthetic infections remedy; consequently, this method makes bone cement (PMMA) more fragile. Hence…
This article presents the bending fatigue behavior and the scatter-band analysis of aluminum alloys under beneficial conditions of nano-clay-particles and heat-treating, compared to detrimental conditions of the mechanical stress and the…
The goal of this study was to determine the reasons for failure of slab carrying clamps which had occurred in one of the clamp support levers. Detailed fractography analysis revealed that there was a welded joint at the location where…
Aim of the paper is to present a one dimensional simple model for the study of the bond behavior of Fabric Reinforced Cementitious Matrix (FRCM) strengthening systems externally applied to structural substrates. The equilibrium of an…
This paper presents a dynamic and critical buckling analysis of the presence of a crack of steel-polymer concrete composite beams modelled using a refined quasi 3D beam theory. The beam model is a hollow steel box section filled with a…
Overall structural integrity and load transfer between concrete and reinforcement enabling composite action relies on the bond between concrete and reinforcement. Bond strength determination of reinforced concrete is an essential task that…
The presence of a geometric discontinuity such as a crack or a notch can cause the failure of a structure during its use. Under various mechanical or thermal stresses, a high concentration of stresses can take place at the level of these…
When the width of cracked nanocomponents made of brittle or quasi-brittle materials is less than approximately , the size of the - dominance zone becomes smaller than and comparable to the fracture process zone ( ). The fracture process…
The article presents the results of computational and experimental studies of the strength and damageability of a connecting composite part in a metal-composite joint of isogrid and anisogrid structures made of polymer composite material…
Concrete-filled steel tubular (CFST) columns are broadly used in many structural systems for their well-known merits. This paper presents a finite element investigation on the structural behaviour of short circular deficient steel tubes…
The thermal behavior in WAAM process is a significant cause for thermal stress. In this paper, a 3D model of a four-layer wall is built in ABAQUS software in order to investigate the thermal behavior in a carbon steel (ASTM A36) WAAM wall.…
The objective of this work is to analyze some geometrical effect to predict the damage of aluminum 2024T3 structure after validate numerical model by experimental test. The mechanical of damage behaviour under tensile tests of several…
Cold expansion by hardening is a common process used in the aerospace industry to extend the fatigue lifetime of assembly holes, through a field of high compressive tangential residual stresses. The understanding and the control of the…
This paper describes the results of the temperature monitoring of a frozen wall (FW) around the skip shaft of a potash mine under construction. The data on temperature measurements in control-thermal boreholes were used to parameterize the…
In this paper, the initial and maximum load was studied using the Finite Element Modeling (FEM) analysis during impact testing (CVN) of pipeline X70 steel. The Gurson-Tvergaard-Needleman (GTN) constitutive model has been used to simulate…
Friction stir welding (FSW) is an extremely complex process because it depends on the intrinsic and extrinsic factors of the material under consideration. The purpose of the present work is to formulate a set of recommendations concerning…
A limit analysis method for masonry domes composed of interlocking blocks with non-isotropic sliding resistance is under development. This paper reports the first two steps of that work. It first introduces a revision to an existing limit…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
The present study develops a knowledge-based machine learning framework for estimating the fatigue life of Al alloy using a combination of data-driven models and an empirical equation. Three different ML models were developed and tested…
This work is dedicated to the experimental study of the influence of preliminary dynamic loading on the residual strength of the laminated polymer composite under compression. A series of low-velocity transverse drop-weight impact tests in…
In the last decade, several studies have been introduced to the development and use of compressed earth blocks in green building construction. Studying the evaluation of existing cracks in construction builders by these blocks is an…
A geometrically simplified plane elasticity problem of a finite small crack emanating from a thin interfacial zone surrounding the circular inclusion situated in the finite bounded domain is investigated. The crack is arbitrarily oriented…
This study uses theoretical stress intensity factor data to assess how well machine learning models predict crack length. Thin-walled damage plate under various modes was evaluated based on the theoretical relation. Using theoretical data…
The role of structural mechanisms responsible for the consequent staging of damage-failure transition as the combination and continuity of ductile and creep kinetics of the structure evolution and the modeling in dwell fatigue regime.…
Damage assessment in the actual operating process of the structure is a modern and exciting problem of construction engineering due to several practical knowledge about the current condition of the inspected structures. However, the…
Hydraulic fracturing with oriented perforations is an effective technology for reservoir stimulation for gas development in shale reservoirs. However, fracture reorientation during fracturing operation can affect the fracture conductivity…
2024 aluminum alloy is a common aeronautic material. During operations, construction elements made of aluminum alloys undertake complex cyclic loadings. Therefore, it is important to estimate the influence of these loadings on the…
Preferred formulation of the problem in two space dimensions are described for solving the three fundamental equations of mechanics (conservation of mass, conservation of momentum, and conservation of energy). Models of the behavior of…
This paper is concerned with investigating of the plastic behaviour on gap K-joints of truss girders, made from thin-walled rectangular hollow section members. An experimental study was carried out on a full-scale girder under a…
Ground steel storage tanks are widely used in different industries. Regarding the significance of these structures, ensuring the proper performance of such structures in earthquakes needs evaluating their seismic performance. The present…
Pulsed thermography is an active non-destructive technique which uses optical excitation source to stimulate heating of the object under investigation. This work is devoted to the simulation of the pulsed thermography method in a steel…
