Abstract
The present study investigates the influence of corrosion exposure on the fatigue behavior of S460NL high-strength structural steel, a material that is frequently utilized in offshore and civil engineering structures. Accelerated corrosion was simulated under controlled laboratory conditions for exposure periods of 3 days, 6 days, and 6 + 3 days, in addition to specimens subjected to natural atmospheric corrosion. To this end, fatigue tests were performed to obtain S–N curves, and the results were evaluated using Basquin's law and the probabilistic Castillo–Canteli model.
The findings indicate that corrosion has a substantial impact on fatigue resistance. The endurance limit exhibited a decline from 214 MPa for the reference specimens to 176 MPa following three days of corrosion, 135 MPa after six days, and approximately 92 MPa after combined corrosion exposure, signifying a reduction of up to 57%. Fractographic observations revealed that corrosion pits act as stress concentrators, thereby promoting early crack initiation. A discernible correlation was identified between corrosion mass loss and normalized endurance limit.
These findings highlight the importance of considering corrosion effects in fatigue life assessment and structural design of high-strength steel components.
Keywords
Article history
- ReceivedUntil the next stage: 29 days
- RevisedUntil the next stage: 25 days
- AcceptedUntil the next stage: 6 days
- Published
Statements
Funding
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
May be shared and adapted, provided appropriate credit is given. Copyright © 2026 Stanislav Seitl, Mohammad Sami Al Khazali, Lucie Malikova, Vít Křivý, Miroslav Vacek.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Wouter De Corte, Peter Helincks, Veerle Boel, Jan Klusak, Stanislav Seitl, Geert De Schutter, Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint , Fracture and Structural Integrity: Vol 11 No 42 (2017): October 2017
- Stanislav Seitl, Petr Miarka, Evaluation of mixed mode I/II fracture toughness of C 50/60 from Brazilian disc test , Fracture and Structural Integrity: Vol 11 No 42 (2017): October 2017
- Václav Veselý, Jakub Sobek, Lucie Šestáková, Petr Frantík, Stanislav Seitl, Multi-parameter crack tip stress state description for estimation of fracture process zone extent in silicate composite WST specimens , Fracture and Structural Integrity: Vol 7 No 25 (2013): July 2013
- Vladimir Ruzicka, Lucie Malikova, Stanislav Seitl, Over-deterministic method: The influence of rounding numbers on the accuracy of the values of Williams’ expansion terms , Fracture and Structural Integrity: Vol 11 No 42 (2017): October 2017
- Stanislav Seitl, Petr Miarka, Vladimir Ruzicka, Lucie Malikova, Alejandro Cruces, Pablo Lopez Crespo, Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Stanislav Seitl, José D. Ríos, Hector Cifuentes, Comparison of fracture toughness values of normal and high strength concrete determined by three point bend and modified disk-shaped compact tension specimens , Fracture and Structural Integrity: Vol 11 No 42 (2017): October 2017
- Jiri Klon, Stanislav Seitl, Hana Simonova, Zbynek Kersner, Ivana Kumpova, Daniel Vavrik, Pilot evaluation of a fracture process zone in a modified compact tension specimen by X-ray tomography , Fracture and Structural Integrity: Vol 11 No 42 (2017): October 2017
- Lucie Malikova, Pavel Doubek, Petr Miarka, Stanislav Seitl, Influence of the interphase between laser-cladded metal layer and steel substrate on fatigue propagation of a short edge crack , Fracture and Structural Integrity: Vol 16 No 59 (2022): January 2022
- Pavel Doubek, Ivana Kumpová, Lucie Malíková, Mohammad Sami Al Khazali, Stanislav Seitl, Determination of the geometric parameters of the defects based on the tomographically obtained data and their influence on the fatigue behavior of the S960 with laser cladded protective layers , Fracture and Structural Integrity: Vol 19 No 71 (2025): January 2025
- Jiri Brozovsky, Martin Krejsa, Petr Lehner, Premysl Parenica, Stanislav Seitl, Stochastic Modeling of Structural Fatigue Damage in High Strength Steel Structures , Fracture and Structural Integrity: Vol 19 No 71 (2025): January 2025