Abstract
The volume fraction effect of carbon fiber in an epoxy matrix in the vicinity of the notch on the traction and torsion behavior were studied. This volume fraction which increases with the reduction of the thickness is a parameter which proved effective on the capacity of resistance. The calculations are done with the numerical code (ABAQUS 2009) using the model Hashin with shell elements of the structure. The objective of this study is to simulate the damage of stratified composite materials, the effect of several parameters such as the stacking sequence and the increase of the thickness of the folds having the same orientation of the structure, were evaluated and presented by load-displacement curves. The results obtained from the study illustrate the variation of damage as a function of these effects which act simultaneously and which also show that these modifications have a higher absorption capacity than that without modification.
Keywords
Article history
- ReceivedUntil the next stage: 52 days
- Revision requestedUntil the next stage: 52 days
- AcceptedUntil the next stage: 3 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2019 Fouzia Larbi Chaht, Mohamed Mokhtari, Habib Benzaama.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Badr Benamar, Mokhtari Mohamed, Madani Kouider , Benzaama Habib , Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint , Fracture and Structural Integrity: Vol 13 No 50 (2019): October 2019
- Hakim Siguerdjidjene, Amin Houari, Kouider Madani, Salah Amroune, Mohamed Mokhtari, Barhm Mohamad, Chellil Ahmed, Abdelkrim Merah, Raul Campilho, Predicting Damage in Notched Functionally Graded Materials Plates through extended Finite Element Method based on computational simulations , Fracture and Structural Integrity: Vol 18 No 70 (2024): October 2024
- Abdallah Benzaama, Mohamed Mokhtari, Habib Benzaama, Elamine Abdelouahed, Tawfik Tamine, Kouider Madani, Amir Slamen, Mrabet Ilies, Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load , Fracture and Structural Integrity: Vol 13 No 50 (2019): October 2019
- Nourddine Hammadi, Moahmed Mokhtari, Habib Benzaama, Kouider Madani, Abdelkader Brakna, Elamine Abdelouahed, Using XFEM to Predict the Damage with Temperature of the Steel Pipe Elbows under Bending and Pressure loading , Fracture and Structural Integrity: Vol 15 No 55 (2021): January 2021
- Fella Hamadouche, Habib Benzaama, Mohamed Mokhtari, Miloud Abbes Tahar, Influence of contact parameters in fretting-fatigue contact 3D problems , Fracture and Structural Integrity: Vol 15 No 55 (2021): January 2021
- Mohammed Bentahar, Habib Benzaama, Mahmoudi Noureddin, Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model , Fracture and Structural Integrity: Vol 15 No 57 (2021): July 2021