Tip: use quotes for an exact phrase, e.g. "teacher education"
The purpose of this article is to present the stress intensity factors (SIF) solutions for semi-elliptic crack in pipelines under internal pressures, the stress intensity factors are calculated by the three-dimensional finite element…
This paper discusses features of fatigue crack initiation and growth in aeronautical VT3-1 titanium alloy under pure torsion loading in gigacycle regime. Two materials: extruded and forged VT3-1 titanium alloys were studied. Torsion…
Two parallel comparative ‘Conventional Method and Computer Simulation using ANSYS software’ for prediction of crack growth and its behavior in optical fiber are studied and presented in this work. Corresponding finite element analysis was…
This is the second part of a short three-paper series, aiming to revisit some classical concepts of Linear Elastic Fracture Mechanics. Being the intermediate step of the analysis between infinite domains (discussed in Part-I) and finite…
The behavior of short cracks that depart from elastoplastic notch tips is modeled to estimate the stresses required to initiate and to propagate cracks in notched structural components, and to evaluate the size of tolerable crack-like…
Fatigue cracking of longerons manufactured from Al-alloy AVT-1 for helicopter in-service rotor-blades was considered and crack growth period and equivalent of tensile stress for different blade sections were estimated. Complicated case of…
An attempt has been made to evaluate the applicability of two constitutive models related to the dislocation-obstacle interactions for the description of stress-relaxation behaviour of E911 tempered martensitic steel. The first one is…
Nanostructured adhesives may be defined as those materials whose elements imbedded in an epoxy matrix have dimensions in the 1 to 100 nm range. One of the most interesting aspects of ceramic nanoparticles is that their mechanical…
The effect of residual stresses on surface fatigue crack propagation and fracture mechanics parameters of intersecting orthogonal cracks is discussed. Mutual influence of intersecting cracks and biaxiality affects the nonsingular…
In this paper, the macro and micro-mechanical fracture behavior was studied for aluminum (Al6061) alloy matrix, reinforced with various proportions of TiC particles such as 3wt%, 5wt% and 7wt%. The Al6061-TiC metal matrix composites were…
Ductility in metals includes the material’s capability to tolerate plastic deformations before partial or total degradation of its mechanical properties. Modelling this parameter is important in structure and component design because it…
A new fatigue testing device has been developed to test specimens under biaxial loading at 20 kHz. A flat smooth specimen with a disc geometry is placed on a torus frame and cyclically loaded at the center of its upper face. Disc bending…
Epoxy resin reinforced with 10% of TiO2 and pure epoxy resin are taken to exemplify the possibility of constructing a fracture locus for engineering organic polymers as a dependence of ultimate strain energy density in cohesive failure on…
The novel destructive method is implemented for quantitative assessment of fatigue damage accumulation in the stress concentration zone accompanied by residual stress due to cold expansion of the through-thickness hole. Damage accumulation…
The existence of two singularities related to the stress field at the crack tip and blow-up kinetics of damage localization is considered as the physical basis for the interpretation of the Theory of Critical Distances. The free energy…
The stress, strain rate and process zone with respect to the creep-crack growth are analyzed by employing damage-evolution equations. The damage models for the fracture of the process zone are represented using a stress and ductility based…
Stress and displacement fields in multilayered composites with interfacial imperfections, such as imperfect bonding of the layers or delaminations, or where the plies are separated by thin interlayers allowing relative motion, have large…
In the present paper, the multiaxial fatigue life assessment of notched structural components is performed by employing a strain-based multiaxial fatigue criterion. Such a criterion, depending on the critical plane concept, is extended by…
This paper deals with the fatigue crack propagation behavior of rolled AZ31B magnesium alloy (grain size: approximately 40 ?m). Fatigue crack propagation tests were performed on single edge notched tension specimens at a stress ratio of R…
The Static Thermographic Method (STM) involves analyzing the thermal behavior of a specimen subjected to a quasi-static tensile test. The temperature trend, measured by an infrared camera, follows three phases where the first and second…
In this work different strategies to estimate crack path for cylindrical contacts under fretting conditions are carried out. The main goal is to propose and to evaluate methodologies not only to estimate the direction of crack initiation…
The paper presents results of calculation for modelling of the stressstrain relationship in the case of block loads with mean load value. A model, based on the stable hysteresis loops, was assumed and modified to use for block loading…
Crack trajectories under different loading conditions and material microstructural features play animportant role when the conditions of crack initiation and crack growth under fatigue loading have to beevaluated. Unavoidable…
The high ductility of Fiber Reinforced Self-consolidating concrete (called Sismabeton) can be developed not only in tension but also in compression. This aspect is evidenced in the present paper by measuring the mechanical response of…
In this paper, numerical investigation was carried out to quantify the effect of the cold expansion on fatigue crack initiation in Aluminium alloy. The improvement in fatigue initiation life of specimen after the cold expansion process was…
Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of…
In this study a procedure to stress intensity factors calculation for imitation models made of titanium alloy is described. In service fatigue cracks are detected in a disk and blade “dovetail type” attachment. On the base of this…
On the mode O existence in three-dimensional plates weakened by circular and elliptical holes under mode II loading It is known for long time that in a cracked plate subjected to anti-symmetric plane loading, the Poisson’s effect leads to…
In this paper the effect of reinforcement crack position and loading conditions (in mode I) on the stress intensity factors of the Al/SiCp metal matrix composite was examined using a finite element method. A simple cubic cell model with…
In the last two decades, visual image techniques such as Digital Image Correlation (DIC) enabled to experimentally determine the crack tip displacement and strain fields at small scales. The displacements are tracked during loading, and…
The main purpose of this paper is to examine the influence of the critical plane orientation on the estimated fatigue strength of metals under multiaxial loading. The algorithm employed to evaluate fatigue strength implements the criterion…
Additive Manufacturing (AM) is a new innovative technique that allows the direct fabrication of complex, individual, delicate and high-strength products, based on their 3D data. Selective Laser Melting (SLM) is one of the AM processes that…
Localized displacement measurements based on electronic speckle-pattern interferometry are used to obtain crack mouth opening displacement (CMOD), stress intensity factor (SIF) and T-stress values during crack growth around cold-expanded…
The scatter degree of the fatigue samples is reduced when the nodal force based structural method is used for steel welded joints, while it is still high for aluminum alloy welded joints. Statistical method and rough set theory is used to…
Orthotropic decks were applied to the long span bridges after World War II due to several advantages, such as light weight, high strength, few deck joints, durability, rapid construction, life-cycle economy. The fatigue problem of…
In this work it is proposed a methodology for the evaluation of plasticity-induced crack shielding from the analysis of the crack tip displacements fields measured by digital image correlation. This methodology is based on the evaluation…
Aim of the present work was the instrumentation of a maxi scooter for the field collection of service loads acting on the scooter main components such as frame, fork, handlebar, rear frame and suspension. Service loads were collected on an…
Most techniques of measuring the stress intensity factor (SIF) in the cracking process assume a crack in a planar medium. Currently, there is no effective approach for curved brittle shells, particularly for non-developable cases, i.e.…
Bonded assemblies are widely used in many industrial sectors mainly in the aerospace field. Many researches in these domains are focused on evaluating the stresses in the adhesive layer in order to achieve maximum strength and long service…
TIG-dressing is a technique used to improve the fatigue strength of welded joints by a remelting of the weld toe region that promotes both a smoother transition between the plate and the weld crown and a residual stress redistribution.…
There is an ever increasing need for accurate understanding of the fatigue crack growth behaviour in major engineering materials and components. With the move towards more complex, probabilistic assessments, the traditional ‘safe’ or…
The stress-strain state analysis of the gas turbine engine compressor disk was carried out taking into account damage accumulation under various loading conditions in the temperature range. Characterization of the constraint effects was…
When the width of cracked nanocomponents made of brittle or quasi-brittle materials is less than approximately , the size of the - dominance zone becomes smaller than and comparable to the fracture process zone ( ). The fracture process…
The three major issues which contribute to uncertainties in fatigue life estimations are the limited transferability of material data obtained in a laboratory for describing the fatigue behavior of components, the lack of damage…
This work is motivated by the increasing interest towards the application of the “Projection-by-Projection” (PbP) spectral method in finite element (FE) analysis of components under multiaxial random loadings. To help users and engineers…
The aim of this paper is to calculate how the surface crack front and the dimensionless compliance evolve in cracked cylindrical bars subjected to cyclic tension or bending with different initial crack geometries (crack depths and aspect…
In this paper the fatigue behaviour of a stainless steel AISI 304L is analysed. In the first part of the work the results obtained under constant amplitude fatigue are presented and synthesised in terms of both stress amplitude and energy…
This paper analyses industrial PVC sheets structural integrity assessment widely used for different ranges of industrial applications. We investigated combined approaches focused on fracture toughness assessment to predict PVC mechanical…
Crack initiation and propagation have been investigated on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing. Three controlled actions were implemented in order to carry out fatigue tests at…
Axial alternating fatigue tests with superimposed static torsional mean stress and shear alternating fatigue tests with superimposed static tensile mean stress are represented. A decrease in the fatigue life of the material was observed…
