Tip: use quotes for an exact phrase, e.g. "teacher education"
Two parallel comparative ‘Conventional Method and Computer Simulation using ANSYS software’ for prediction of crack growth and its behavior in optical fiber are studied and presented in this work. Corresponding finite element analysis was…
Crack propagation simulation began with the development of the finite element method; the analyses were conducted to obtain a basic understanding of the crack growth. Today structural and materials engineers develop structures and…
Earthquake action is the main external factor which influences long-term safe operation of civil construction, especially of the high-rise building. Applying time-history method to simulate earthquake response process of civil construction…
A three-dimensional crack propagation simulation is performed by the Dual Boundary Element Method (DBEM). The Stress Intensity Factors (SIFs) along the front of a semi elliptical crack, initiated from the external surface of a hollow axle…
This paper summarizes the results of the through-thickness residual stress distributions on dissimilar metal weld (DMW) mock-up. DMWs, as welded joints between ferritic steels and either austenitic stainless steels or nickel-based alloys…
In this work, the orientation and propagation of cracks in fretting fatigue problems is analyzed numerically using the finite element method (FEM) and the extended finite element method (X-FEM). The analysis is performed by means of a 2D…
In this paper, a C0 simple and efficient isoparametric eight-node displacement-model based on higher order shear deformation theory is proposed for the bending behavior study of multilayer composites sandwich plates. Difficult…
In many engineering applications special requirements are directed to a material's fracture behavior and the prediction of crack paths. Especially if the material exhibits anisotropic elastic properties or fracture toughnesses, e.g. in…
Numerical simulation by plastic deformation of the shaping processes currently has a large industrial interest. It allows you to shorten the time of design and construction related products and tools to analyze and to optimize processes.…
This work presents a review of crack propagation simulation models considering plane stress and plane strain conditions. It is presented also a chronological different methodologies used to perform the crack advance by finite element…
A straightforward methodology for modelling the cohesive zone (CZM) of an adhesively bonded joint is developed, by using a commercial finite element code and experimental outcomes from standard fracture tests, without defining a damage law…
This work is a numerical simulation of nonlinear problems of the damage process and fracture of quasi-brittle materials especially concrete. In this study, we model the macroscopic behavior of concrete material, taking into account the…
An original simplified formula is proposed to estimate the load history caused by ballistic impacts characterized by the so-called bullet splash phenomenon, consisting in the complete bullet fragmentation with no penetration of the target.…
This study aims at providing a better understanding of the effects of both microstructure and defect on the high cycle fatigue behavior of metallic alloys using finite element simulations of polycrystalline aggregates. It is well known…
Simulating the concrete fracture unlike other elastic and brittle materials quite different due to its quasibrittleness. The present research focussed on assess softening behavior by varying different fractions of aggregates and cement…
In this paper, a finite element simulation of nonlinear elasto-plastic deformations of Reissner-Mindlin bending plates is described. The previously proposed four-node Q4g element with transverse energy of shearing for thick bending plates…
Among the various severe plastic deformation techniques, Equal Channel Angular Extrusion (ECAE) is a widely used method that introduces significant plastic deformation into a sample by forcing it through two intersecting channels, without…
The mechanical clinching process can be used for the load-bearing structures of thin-walled steel frame halls. Numerical simulation of crack propagation in a clinching joint using finite element method (FEM) software is an important tool…
The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X) is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five…
The fatigue life prediction model of self-piecing riveting components of aluminum alloy is established and the effects of roughness and residual stress on fatigue life of self-piercing riveting components is analyzed by the model. Finite…
Fatigue considerations often distinguish between fatigue crack nucleation and fatigue crack propagation. The current work presents a modeling approach utilizing one Fatigue Damage Indicator to treat both in a unified way. The approach is…
Results of a double-shear single-dowel wood connection tested under monotonic quasi-static compression loading are presented and discussed in this paper. The wood used in this study was a pine wood, namely the Pinus pinaster species, which…
In this study, multiple and non-planar crack propagation analyses are performed using Fracture and Crack Propagation Analysis System (FCPAS). In an effort to apply and validate FCPAS procedures for multiple and non-planar crack propagation…
Artificial ground freezing is an efficient technique which allows one to sink the mine shafts under complex hydrogeological conditions. The aim of artificial ground freezing is a creation of a temporary wall of frozen soil around the…
The research addresses evaluation of stress-strain state (SSS) in the “zygomatic bones–implants–denture base” system by varying the type and number of the zygomatic implants, as well as applying loads. The load magnitude was varied over a…
Multi-cluster staged fracturing technology is an effective measure to stimulate the reservoir properties. However, the inter-cluster interference effect is obvious when the cluster spacing is very narrow, which seriously affects the effect…
The bonded composite repair has proven to be an effective method for addressing crack damage propagation. Numerous studies have employed experimental and simulation techniques to demonstrate the repair performance through the composites.…
Our research described in this paper focused on fabricating and characterising polylactic acid (PLA) composites reinforced with randomly dispersed boron nitride nanoplatelets (BNNP). The integrated experimental analysis with the Finite…
Composite structures in the field of advanced and modern structures in engineering design and according to high specification of composite materials such as high strength to weight ratio use in various industries such as aerospace, marine.…
This study presents the first investigation into the use of glass fiber reinforced polymer GFRP to strengthen steel beams with web openings. Based on previous research about the strengthening of steel beams with web perforation using…
Crack propagation simulation began with the development of the finite element method; the analyses were conducted to obtain a basic understanding of the crack growth. Today structural and materials engineers develop structures and…
This study presents an experimentally calibrated methodology to enhance the predictive accuracy of finite element simulations for Fused Deposition Modeling (FDM) parts in Abaqus by replacing idealized filament geometry with a physically…
The study explores the feasibility of a new all-steel buckling restrained brace (BRB) with the double pre-tensioning system as an alternative to conventional concentrically braced frames by using finite element method (ABAQUS program), And…
The aim of this study is to deal with the simulation of intralaminar fatigue damage in unidirectional composite under multi-axial and variable amplitude loadings. The variable amplitude and multi-axial loading is accounted for by using the…
Numerous components designed for use at elevated temperatures now exhibit multiaxial stress states as a result of geometric modification and material inhomogeneity. It is necessary to anticipate the creep rupture life of such components…
The initiation and propagation of fatigue cracks during cyclic torsion loading was studied in a cast Al alloy (A357) with a relatively large (~500 ?m) grain size. 2D observations, revealed that multi site crack initiation occur on the…
The concept of ratchetting strain as a crack driving force in controlling crack growth has previously been explored at Portsmouth using numerical approaches for nickel-based superalloys. In this paper, we report the first experimental…
For various configurations examined in a series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path, crack growth life, near crack tip deformations, and crack closure – are measured…
The study of salt rocks deformation and fracture processes is an essential part of mining parameters justification for mineral salt deposits. The results of uniaxial compression tests on large salt rock specimens are presented as a loading…
The paper is aimed at the indicative evaluation of the effect of random scatter of input parameters in case of durability of reinforced concrete bridge deck. The time to onset of corrosion of steel reinforcement of concrete bridge deck…
An edge crack propagation in a steel bar of circular cross-section undergoing multiaxial fatigue loads is simulated by Finite Element Method (FEM). The variation of crack growth behaviour is studied under axial and combined in phase…
In this work different strategies to estimate crack path for cylindrical contacts under fretting conditions are carried out. The main goal is to propose and to evaluate methodologies not only to estimate the direction of crack initiation…
The global reserves of natural gas hydrates are extremely abundant, which is attracting more and more scientists’ attention. However, hydrate reservoirs are usually clayey silt hydrate reservoirs with low strength, borehole collapse is a…
The crack growth behavior in 2324-T39 aluminium alloy was experimentally investigated. Two types of crack branching were observed. The mechanism of an uncommon crack branching which results from the link up of secondary crack with the main…
The present study aims to develop an algorithm able to predict the fatigue lifetime of nitrided steels. Linear multi-axial fatigue criteria are used to take into account the gradients of mechanical properties provided by the nitriding…
In the past several numerical studies have addressed the ductile mode of fracture propagation. However, the brittle mode of pipeline failure has not received as much attention yet. The main objective of this study is to predict brittle…
The evaluation of fracture mechanics parameters of materials has become very important part of considering the condition of older constructions as well as properties of newly developed materials. This contribution focuses on a numerical…
Bolted joints are the most common solution for joining composite components in aerospace structures. Critical structures such as wing to fuselage joints, or flight control surface fittings use bolted joining techniques. Recent research…
In this paper, the fatigue crack growth simulation of two non-coplanar embedded cracks using the s-version finite element method is presented, and the validity and reliability of the alignment rule for two non-coplanar cracks are…
An original simplified finite element model is proposed to simulate the effects of non-penetrating ballistic impacts causing the so-called bullet splash phenomenon (complete bullet fragmentation), while no fragmentation is caused to the…
