Tip: use quotes for an exact phrase, e.g. "teacher education"
This paper discusses the relationship between the stress response and the microstructure under tension-torsion multiaxial proportional and nonproportional loadings. Firstly, this paper discusses the material dependency of additional…
This work is devoted to an experimental investigation of fatigue behavior of pultruded fiberglass tubes under uniaxial tension, compression and torsion. Static tests were carried out; a presence of postcritical deformation stage during…
Nowadays the demand for high strength steels is increasing. In order to design and develop high performance products, it is essential to understand the fatigue behavior of these materials. When considering welded components, the fatigue…
Ultrasonic fatigue tests were carried out on stainless steel AISI 316 and 304, under two modalities: at room temperature and in immersion (water for 316 and antifreeze for 304 steels); all tests were carried out with a loading ratio R=-1.…
Ultrasonic fatigue at an operating frequency of 20 kHz was conducted on thermally treated clay bricks at 500, 750, and 1000 °C with a holding time of 5 h, using a three-point bending setup to assess their fatigue endurance. A Vickers…
The present study investigates the influence of corrosion exposure on the fatigue behavior of S460NL high-strength structural steel, a material that is frequently utilized in offshore and civil engineering structures. Accelerated corrosion…
Shape memory property characterizes the behavior of many Ti based and Cu based alloys (SMAs). In Cu-Zn-Al SMAs, the original shape recovering is due to a bcc phase that is stable at high temperature. After an appropriate cooling process…
In the last decades the necessity of implant devices is continuously increasing. The researchers have thus focused their attentions on the development of new biocompatible materials, in particular polymers. Among them, polyetheretherketone…
An experimental study was conducted to investigate the influence of operational defects, such as surface scratches and dents, on the residual mechanical properties of glass fiber-reinforced plastic (GFRP) during quasi-static tensile and…
Fatigue surface crack growth is studied through experiments and computations for aluminum alloys D16T and B95AT (analogue of 2024 and 7075 aluminum). Subjects for studies are cylindrical hollow specimens with external semi-elliptical…
In this work, the orientation and propagation of cracks in fretting fatigue problems is analyzed numerically using the finite element method (FEM) and the extended finite element method (X-FEM). The analysis is performed by means of a 2D…
Fretting fatigue experiments aim to represent industrial problems and most of them endure variable loading. Being able to assess lifetime of assemblies, especially for low propagation rate conditions, is essential as experimental…
The aim of this research activity was to study the fatigue behavior of laser welded joints of titanium alloy, in which the welding was performed using a laser source and in the absence of filler material, by means of unconventional full…
In this paper, a previously developed modification of the Sainz model of multiaxial fatigue is reduced to an invariant form. Model constants were determined for different sets of setup experiments. It was supposed to introduce an…
The fatigue strength evaluation and fracture behavior for a dual phase steel-AA6061-T6 bonded joints with three different adhesives (DC-80, Betamate 120 and MP55420) are presented in this paper. Single lap shear tests were used to…
The main goal of the present research is to propose an integrated methodology to address the fatigue performance of topology optimized components, produced by additive manufacturing. The main steps of the component design will be…
In this paper, the fatigue crack growth simulation of two non-coplanar embedded cracks using the s-version finite element method is presented, and the validity and reliability of the alignment rule for two non-coplanar cracks are…
Microstructural characteristics, monotonic and strain-controlled cyclic axial behaviors of AW2099-T83 Aluminum-Lithium alloy were investigated. Grain sizes and structures are not uniform in the different orientations studied. High strength…
An inhomogeneous distribution of non-metallic inclusions can result from the steel casting process. The aim of the present study was to investigate the damaging effect of an inhomogeneous distribution of nonmetallic inclusions on the crack…
Cracks at notches deserve special consideration in the design of steam turbine components. This work is addressed to investigate the crack initiation behavior a 10%Cr rotor steel with the help of notched specimens under service-type…
The main objective is to model the behavior of 7075 aluminum alloy and built an experimental database to identify the model parameters. The first part of the paper presents an experimental database on 7075 aluminum alloy. Thus, uniaxial…
Crack closure influences fatigue crack growth rate and must be included in the design of components. Plasticity induced crack closure is intimately linked with the crack tip plastic deformation, which becomes residual as the crack…
The understanding of shear-mode crack growth mechanisms and crack branching phenomena is of great interest for a variety of practical engineering situations. Despite this fact, relatively little research is available regarding these…
Automotive industry and mechanical engineering strive to drastically reduce the carbon footprint of their products. This becomes increasingly important as aluminum usage grows for lightweight, efficient components. Nevertheless, cast…
In recent years, mechanical property of many SMA has improved in order to introduce these alloys in specific field of industry. Main examples of these alloys are the NiTi, Cu-Zn-Al and Cu-Al-Ni which are used in many fields of engineering…
Redundant data obtained under quasi-constant {DeltaK, Kmax} loading conditions is used to verify if the effective stress intensity factor (SIF) range DeltaKeff DeltaKmax DeltaKop is indeed the fatigue crack driving force. The crack opening…
Residual stresses are often inevitably introduced into the material during the fabrication processes, such as welding, and are known to have significant effects on the subsequent fatigue crack growth behavior of welded structures. In this…
For various configurations examined in a series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path, crack growth life, near crack tip deformations, and crack closure – are measured…
2024 aluminum alloy is a common aeronautic material. During operations, construction elements made of aluminum alloys undertake complex cyclic loadings. Therefore, it is important to estimate the influence of these loadings on the…
Experimental tests were conducted on additive manufactured Ti-6Al-4V titanium alloy to investigate the mechanical and crack properties under multiaxial cyclic loading. Selective Laser Sintering technique (SLS) was employed to fabricate…
Research in the field of property analysis of 3D printed structural elements raises many new questions. A major challenge is to understand the behavior of the material, as the raw material and the resulting printed sample cannot be…
The influence of fiber orientation on the crack propagation behavior was studied with single edgenotched specimens which were cut from an injection-molded plate of short-fiber reinforced plastics of polyphenylenesulphide (PPS) reinforced…
Fatigue tests were conducted on cylindrical bars specimens to understand the fatigue behavior of SICLANIC®. Although it displays good resistance in monotonic tension, this material weakens and shows a softening in repeated solicitation.…
The article analyzes the fatigue performance of flexible pavement structures incorporating cement-bound granular material (CBGM) as a subbase layer. In current Polish design methodologies, overly conservative and underestimated stiffness…
Nodular cast iron (GJS) represents one of the most widely used materials for vehicle, energy and heavy machinery industry. Nevertheless, foundries struggling with the influence of local material defects in GJS like pores, shrinkages and…
Limited by the mechanical properties of materials, silicon (Si) carbide insulated gate bipolar transistor (IGBT) can no longer meet the requirements of high power and high frequency electronic devices. Silicon carbide (SiC) IGBT…
The mechanical fatigue behavior of gold microbeams is analyzed. Dedicated devices have been designed and built able to produce alternate loading on gold specimens; the electrostatic actuation is used as driving force. Gold beams are tested…
This note summarizes some recent investigation results on the behavior of corroded steel bolted joints under uniaxial fatigue loading. Fatigue test specimens, were made up using S355 structural steel plates joined together with preloaded…
In this work, the microstructural evolution, surface characteristics and wear behavior of high hardness AISI 440C samples coated with a TiN film synthesized at room temperature were investigated. The coating was deposited using a combined…
Axial alternating fatigue tests with superimposed static torsional mean stress and shear alternating fatigue tests with superimposed static tensile mean stress are represented. A decrease in the fatigue life of the material was observed…
The crack growth behavior in 2324-T39 aluminium alloy was experimentally investigated. Two types of crack branching were observed. The mechanism of an uncommon crack branching which results from the link up of secondary crack with the main…
In cyclic multiaxial stress/strain condition under nonproportional loading in which principal direction of stress/strain are changed in a cycle, it becomes difficult to analyze stress/strain ranges because of complexity of multiaxial…
This paper analyzes the effects of crack tip plastic strains and compressive residual stresses, created by fatigue pre-cracking, on environmentally assisted cracking of pearlitic steel subjected to localized anodic dissolution and hydrogen…
This article deals with identifying defects of layered high strength steel materials with the help of tomography measurement. Test samples were made of S960 High Strength Steel to which layers of either aluminium bronze, hardchrome, cobalt…
This research is based on the study of the fatigue behavior of an aluminum alloy plate with a central crack. The plate is subjected to a tensile loading on its lower and upper parts. Several parameters were highlighted, such as the loading…
Elber assumed that the actual driving force for fatigue crack growth (FCG) is the effective stress intensity factor ΔKeff. To verify this hypothesis, both DC(T) and C(T) specimens are cut from a 6351-T6 Al alloy circular bar with two…
In the present investigation in-plane anisotropy in tensile and ratcheting behavior of cold rolled and annealed commercially pure titanium plate has been studied. Flat tensile and fatigue test specimen oriented at 0, 45, and 90 degree to…
The modified compact tension test (MCT) may represent a new test configuration for the performance of static and other kinds of fatigue tests on concrete-like materials. Core drilling can be employed to obtain specimens which are…
The dynamic behavior of beam-like structures with fatigue cracks forced by harmonic excitation is characterized by the appearance of sub and super-harmonics in the response even in presence of cracks with small depth. Since the amplitude…
In the present paper, fatigue tests were performed on sand-blasted AlSi10Mg samples produced by Direct Metal Laser Sintering (DMLS). The effect of sand-blasting on surface properties was evaluated by roughness and residual stresses…
