Tip: use quotes for an exact phrase, e.g. "teacher education"
This study investigates the modification of epoxy resins with pyrolysis bio-oils derived from plant waste, aiming to enhance mechanical performance. A method for epoxy resin modification using bio-oil is proposed, including techniques for…
This paper describes an experimental study developed to characterize the mode I and mode II fracture toughness of carbon/epoxy woven composites, using DCB and ENF tests, respectively. The laminates were manufactured using an epoxy resin…
The composite materials are normally made of reinforcements and resins. High-performance composites are generally termed hybrid composite materials. Generally, fiber-reinforced composite laminates are very weak in their out-of-plane…
The benefits of resins nano-enhanced on the impact response of sandwich composites made by fiber glass/epoxy skins and balsa wood core were studied. Afterwards, the influence of the core's discontinuity was analyzed in terms of impact…
This study examines the influence of graphene nanoplatelets (GNPs) and multi-walled carbon nanotubes (MWCNTs) on the mechanical properties of SiO2-loaded epoxy-polylactic acid (PLA) composites. Epoxy and PLA were mixed to form the matrix…
Steel-concrete joints are often made by welded shear studs. However, this connection reduces the fatigue strength, especially in situations where locally concentrated loads occur with a large number of load cycles e.g. in bridge decks. In…
The purpose of this study is to analyze the behavior of a crack with and without reinforcement by a composite patch of an aluminum plate in mode I using the finite element method. The repair patch is boron / epoxy and Carbon / epoxy, which…
To study glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using asymmetric Four Point Bend specimen. Fracture toughness values for different fiber-oriented glass/epoxy laminates under…
Epoxy resin reinforced with 10% of TiO2 and pure epoxy resin are taken to exemplify the possibility of constructing a fracture locus for engineering organic polymers as a dependence of ultimate strain energy density in cohesive failure on…
In this study, Al2O3 microparticle was used as a filler for pineapple fiber reinforced composites with different matrix polymers. The effect of Al2O3 microparticles in the epoxy and unsaturated polyester matrix on the mechanical, physical…
Interfacial interaction is investigated between the two basic constituents in carbon fiber reinforced plastics (CFRPs). Efforts have been made to quantify the interfacial shear strength (IFSS) between individual carbon fiber (CF) and epoxy…
The use of Areca sheath in developing a newer composite material is proposed in this article. The Areca sheath particulates are extracted by pulverizing long sheaths into different sizes of particulates and are reinforced into the epoxy to…
The aim of this study is to analyze the effect of different geometries and sections on the mechanical properties of epoxy specimens. Five tensile tests were carried out on three types of series. The experimental results obtained were…
In this paper, the effect of corrosion on the performance of the bonded composite patch repair in aluminum alloy A5083 marine structure was investigated using three dimensional finite element methods. To this end, two patches made in…
This study investigates jute fibre reinforced epoxy composites fabricated using a controlled vacuum bag moulding process, with emphasis on establishing reliable structure property relationships relevant to sustainable engineering…
The present study aims to develop a novel hybrid composite by incorporating clamshell as a secondary reinforcing filler into a bamboo-epoxy composite. The primary objective of this hybridization is to optimize the synergistic benefits of…
In this paper, the effect of integration of natural fibers in UD carbon fiber is studied. The integration of natural fibers in carbon fiber is made via intra fiber hybridization. Natural fiber hybrid composite samples were prepared for…
Epoxy with carbon nanofibers (CNFs) are effective nano enhanced materials that can be prepared by easy and low-cost method. The present paper compares the improvements, in terms of flexural and viscoelastic properties, of two epoxy resins…
In recent decades, one can observe a great increase in the replacement of traditional materials with polymer composites in high-strength and lightweight applications. High fuel consumption by automobile and aerospace vehicles built from…
This work is about study of the mechanical behaviour of unidirectional Kevlar / Epoxy composite laminates according to different failure criteria. Varying strength parameters values, makes it possible to compare the ultimate mechanical…
In this paper, gradual demand for curved, stiffened panels composite emerged from carbon fiber reinforced plastics (CFRP); these are structures that are frequently used in aerospace engineering. Up to 50% of the primary structure of the…
This study investigates the effects of low concentration (0.1-0.4 wt.%) nano-boron carbide (B4C) reinforcement on the mechanical, thermal and fracture properties of epoxy nanocomposites. The nanocomposites were prepared via solution…
The present study present the influence of SiCp incorporation on three-body abrasive wear behavior of glass/epoxy composites. The investigations was carried out using dry sand rubber wheel abrasive wear test apparatus. 2k factorial design…
This study investigates the effect of interleaving non-woven veils and their surface areal density on the curved beam strength (CBS) and interlaminar radial stress (ILRS) of glass/epoxy L-bend composite laminates. Carbon veils with areal…
Nanostructured adhesives may be defined as those materials whose elements imbedded in an epoxy matrix have dimensions in the 1 to 100 nm range. One of the most interesting aspects of ceramic nanoparticles is that their mechanical…
The present investigation deals with the characterization of tensile behavior of various Fiber Reinforced Polymer composites under Thermo-Mechanical loading. Five different types of Uni-Directional (UD) composites of Carbon, Glass…
The present work has investigated the fracture toughness of a model DGEBA epoxy system subject to Hidro-Thermal aging. A Photoelastic Stress Analysis technique has been implemented, showing the evolution of stresses arising throughout the…
This study analyses the failure mechanisms of bilayer hybrid composites, consisting of carbon and glass fibres embedded in an epoxy matrix, under bending loads. The objective is to evaluate how different hybrid configurations influence…
This work investigated the effects of graphene and SiO2 addition on the mechanical and fracture properties of epoxy (80%) - Polylactic acid (PLA) (20 %) composites. Epoxy-PLA composites were loaded with graphene and SiO2 (0.1-0.5 wt. %…
In this work has been estimated the compressive strength of a unidirectional lamina of a carbon/epoxy composite material, using the cross-ply and angle-ply laminates. Over the years various methods have been developed to deduce compressive…
Hybridization of natural fiber composite by incorporating waste- derived fillers has been identified as a promising sustainable technique to develop environmentally friendly and economical composites with enhanced mechanical properties.…
Bendable concrete is also defined as engineered cementitious composites because of its great ductility and tight fracture width limitation. ECC mixtures by adding additional Portland cement, silica sand and fly ash, fiber types…
This study experimentally investigates the tensile and bond performance of novel GFRP–SSWM hybrid wraps developed using two epoxy adhesives - Sikadur 30 LP and Sikadur 330. A total of 42 coupon specimens for tensile testing and 48 dumbbell…
The present study investigates the influence of hybrid interleaving technique using Glass and Carbon veils to improve the mode-I fracture toughness in Glass epoxy laminates. Commercially available non-woven Carbon and Glass veils with…
Development in material science impose to use different materials in production. This causes a problem for joining different materials because traditional joining techniques such as welding could not overcome this problem in industries…
This paper investigates the variations of mode I stress intensity factor (KI) for inner penny-shaped and circumferential cracks in functionally graded solid and hollow thick walled cylinders, respectively with the changes of crack…
In structural engineering, composite patch repairs are widely used to address cracked structures. However, their behavior under thermo-mechanical loading remains complex and less understood. This study examines the repair of a…
This research is based on the study of the fatigue behavior of an aluminum alloy plate with a central crack. The plate is subjected to a tensile loading on its lower and upper parts. Several parameters were highlighted, such as the loading…
Hexagonal boron nitride (hBN) and molybdenum disulfide (MoS2) fillers of 2 to 8 wt.% influence on toughness, microhardness and thermal stability of carbon fabric-reinforced epoxy composite (CFREC) reported. Mode-I, mixed-mode I/II…
The hydrophilic nature of bamboo fiber makes them prone to moisture uptake and subsequent property degradation. In this study, bamboo fiber–epoxy composites were hybridized with clamshell-derived particulate fillers to mitigate the adverse…
In this study, a multi-parameter analysis, using Taguchi method for design of experiments, has been conducted to investigate the optimum curing conditions for GNPs/E-glass fabric/epoxy laminated nanocomposites. The independent variables in…
The post-curing process of cured composites is essential in enhancing the strength, stiffness, elevating the glass transition temperature, and reducing residual stress in polymer thermoset composites. The curing temperature and time are…
This work constitutes a contribution to the analysis of the behavior of beams reinforced by composite materials. The analysis was made by a study on concrete elements, and in pre-cracked reinforced concrete then reinforced with carbon…
The use of reinforcements in adhesive joints makes the stress distribution more uniform, improving their mechanical performance and adhesion. The present paper aims to verify the effectiveness and efficiency of the insertion of nylon 6…
The volume fraction effect of carbon fiber in an epoxy matrix in the vicinity of the notch on the traction and torsion behavior were studied. This volume fraction which increases with the reduction of the thickness is a parameter which…
In this work, the effects of natural particles on the micro failure mechanisms and static strength of an epoxy are studied using scanning electron microscope (SEM) technique. To this end, bulk specimens and adhesively bonded single lap…
The aim of this work is to evaluate the failure analysis of jute fabric reinforced composite using statistical technique for marine applications. A fracture mechanics approach is proposed to determine the failure load and fracture…
In this paper, tensile tests of specimens with a pattern of holes made of fiber-glass plastic based on combined epoxy and phenol-formaldehyde resins are carried out in order to study the processes of damage accumulation and tension…
The present paper proposes a strength model for unidirectional composites with Lin/Epoxy. The model assumes that, a central core of broken fibers flanked by unbroken fibers which are subject to stress concentrations from the broken fibers.…
Structural strengthening is vital to improve the load-carrying capacity partially or severely damaged Reinforced Concrete (RC) elements. Fiber Reinforced Polymers (FRPs) are widely used for strengthening purposes. In this study, use of…
