Tip: use quotes for an exact phrase, e.g. "teacher education"
The paper presents the results of tests on the fatigue crack growth for a constant moment amplitude under combined bending with torsion in the aluminium alloy AW-2017A-T4. The tests were performed under different values of the load ratio…
Fatigue cracking of longerons manufactured from Al-alloy AVT-1 for helicopter in-service rotor-blades was considered and crack growth period and equivalent of tensile stress for different blade sections were estimated. Complicated case of…
In this study a procedure to stress intensity factors calculation for imitation models made of titanium alloy is described. In service fatigue cracks are detected in a disk and blade “dovetail type” attachment. On the base of this…
Power plant piping system subjected to many cyclic loading conditions leads to fatigue loading and thereby crack initiation in the piping system. Demonstrating Leak-Before-Break (LBB) in the design stage itself plays an important role in…
We predict the fatigue life of a planar tubular truss when geometrical parameters, material properties, and live loads are non-deterministic. A multi-level calculation uncertainty quantification framework code was designed to aggregate the…
The present work aims at developing a new approach towards the analysis of the crack path through the access to the information from the infrared (IR) video imaging of the steady fatigue crack growth. We first test some commonly available…
Mixed mode crack propagation analysis has been more accessible with the development of new numerical tools, allowing to evaluate the influence of non-mode I loadings in the crack path and in the growth rate. The aim of this work is to…
The profile samples prepared by focused ion beam (FIB) in crack initiation region (CIR) and fish-eye (FiE) region of failed specimens subjected to rotary bending (RB) and ultrasonic axial (UL) fatigue testing with various stress ratios (R)…
Localized displacement measurements based on electronic speckle-pattern interferometry are used to obtain crack mouth opening displacement (CMOD), stress intensity factor (SIF) and T-stress values during crack growth around cold-expanded…
The variation of crack shape factor (a/c) during propagation has an important role on calculation of the stress intensity factor (SIF), where imprecise estimation of this latter can lead us to an inaccurate prediction of failure…
To design and evaluate the analytical crack propagation of a specimen under dynamic load, measurement of dynamic fracture parameters is necessary. However, analytical methods have significant complexity, and experimental methods are also…
An analysis to show the capability of moving mesh strategy to predict dynamic crack growth phenomena in 2D continuum media is proposed. The numerical method is implemented in the framework of the finite element method, which is coupled…
Elber assumed that the actual driving force for fatigue crack growth (FCG) is the effective stress intensity factor ΔKeff. To verify this hypothesis, both DC(T) and C(T) specimens are cut from a 6351-T6 Al alloy circular bar with two…
Crack propagation simulation began with the development of the finite element method; the analyses were conducted to obtain a basic understanding of the crack growth. Today structural and materials engineers develop structures and…
This work is devoted to research and development of models for the processes of nucleation and growth of delamination in laminated composite materials. Possibilities of fracture mechanics approaches using virtual crack closure technique as…
The paper investigates the fatigue crack growth in typical bridge weldments by means of numerical analysis. The extended finite element (XFEM) method is coupled with the low-cycle fatigue (LCF) approach in ABAQUS, and parametric analyses…
The paper presents the fatigue test results including the cracks growth in the composite zirconium-steel subjected to oscillatory bending. Specimens of square cross-section without melted layer and with a melted layer were tested. In the…
Sensitivity to small defects under torsional fatigue loading condition is examined in the high cycle fatigue regime. Fatigue crack initiation and small crack growth behaviors were observed during fatigue testing and fractographic…
Prediction of cyclic life under low cycle fatigue - high cycle fatigue (LCF-HCF) interaction is of paramount importance in the context of structural integrity of components in the primary side of fast reactors where such damage under…
During a ferry flight, in a standard operation condition and at cruising level, a military cargo experienced a double hydraulic system failure due to a structural damage of the dual booster actuator. The booster actuator is the main…
Abstract. Fatigue crack growth (FCG) depends on loading, geometry and also material properties. Since FCG is supposedly linked to crack tip plastic deformation, material’s yield stress, Y0, is an important parameter. The main objective…
Most mechanical components experience multi-axial cyclic loading conditions during service. Experimental analysis of fatigue cracks under such conditions is not easy and most works tend to focus more on the simpler but less realistic case…
A stereo microscope coupled to a 3-D Digital Image Correlation system is used to measure strain ranges on the cyclic plastic zone ahead of a fatigue crack-tip. First, a very refined speckle pattern is applied on the surface of a…
Some numerical studies of crack propagation are based on using constitutive models that account for damage evolution in the material. When a critical damage value has been reached in a material point, it is natural to assume that this…
This paper deals with the fatigue assessment of cast steel defects in terms of macroscopic shrinkage porosity. Within preliminary studies, a generalized Kitagawa diagram GKD was established by numerical analyses of V-notched specimens with…
Part-through surface or corner 2D cracks are commonly found in structural components, even because practically all fatigue cracks tend to start this way. It is a reasonable hypothesis to model them assuming the shape of their fronts is…
This study reports an experimental investigation of the fatigue and fracture resistance of R350HT, a heat-treated pearlitic rail steel with refined microstructure used in rails. Monotonic tensile, rotating bending, linear elastic plane…
This work is devoted to the comparative analysis of three techniques for measurement of energy dissipation in metals under fatigue crack propagation: original contact heat flux sensor, post-processing of the infrared thermography data and…
Through this study, a numerical simulation based on 3D in order to investigate the effect of Crack-front shape on the stress intensity factor and fatigue crack growth behavior of center cracked aluminum plate repaired asymmetrically with a…
The Compact Tension Shear (CTS) specimen is used to study fracture and fatigue under mixed mode I/II loading conditions. Existing K solution was developed for fracture studies and it does not consider the effect of crack deflection. The…
This study presents a numerical prediction of the ductile damage for axial cracks in pipe subjected to internal pressure. The three dimensional finite element methods used to evaluate the J-integral. The effect of the external radius (Rext…
This paper studied the effects of specimen size and type on the real-mode-I fracture toughness (KIC )of steel fiber-reinforced concrete (SFRC) specimens. Mode I KIC tests were performed using semicircular bend (SCB) and center-cracked…
In this paper, an experimental procedure to evaluate the elastic-plastic J-integral at the tip of a fatigue crack is presented. According to this new approach, the elastic component of the J-integral is derived from Thermoelastic Stress…
The three dimensional growth of fatigue cracks in samples of nodular graphite cast iron is characterized using laboratory X-ray computed tomography. The cracks grow from laser machined artificial defects, their development is monitored in…
A 2D bond-breaking model is presented that allows the extraction of the intrinsic line or edge energy, fracture toughness, and strain energy release rate of graphene from measured and calculated 2D Young’s moduli and 2D pristine strengths.…
The microstructural origins of premature fatigue failures were investigated on a variety of forged components manufactured from AZ80 and ZK60 magnesium, both at the test specimen level and the full-scale component level. Both stress and…
This study aims to assess the delamination effect and predict the evolution of damage in 3D printed specimens to investigate the mechanical behavior occurring due to the delamination of the layers of 3D printed thermoplastic polymers.…
The present paper aims to assess the effect of freeze/thaw cycles on fracture behaviour of a natural stone: the red Verona marble. A wide variety of specimen types and methods to determine Mode I fracture toughness of natural stones are…
The paper presents a result of experimental tests of welded S355 specimens subjected to combined bending and torsion loading. In order to analyse how the fillet joints’ shape and the load ratio affect the crack growth, we selected two…
The structural integrity and reliability of glass components are key issues for concentrated solar power (CSP) systems. For example, the glass windows in a solar furnace may suffer catastrophic fracture due to thermal and structural…
Crack growth and brittle fracture is one of the major failure modes in bone materials and therefore understanding the fracture behavior and affecting parameters on the crack growth resistance of bone is necessary for biomechanics…
A detailed investigation was conducted into the fracture mechanisms of cylindrical specimens made of a polycrystalline heat-resistant nickel-based alloy XH73MBTU-VD (EI698-VD), under uniaxial tension in the temperature range of 25–700°C.…
Austenitic stainless steel (JIS-SUS304L) with a bimodal harmonic structure, which is defined as a coarse-grained structure surrounded by a network of fine grains, was fabricated using powder metallurgy to improve both the strength and…
Belgrade fair hall 1 is well known for its dome, which is still the world largest self-supported construction made of pre-stressed concrete, with its diameter of 106 m. In this paper the Finite Element Method (FEM) was performed to analyze…
Low temperature fracture toughness and fracture energy are two important measures that could be used to investigate the impacts of using asphalt modifiers on the performance of asphalt pavements in cold regions. The aim of this research…
This work presents an in-depth study of the low-cycle fatigue behaviour of ferritic-pearlitic HSLA-420 high-strength steel sheets, with emphasis on the influence of loading direction on fatigue life and damage mechanisms. Plastic…
Over the years several design philosophies to fatigue developed in order to combine structural safety and economy to manufacturing and operating aircraft process. The safe-life approach, which consists of designing and manufacturing a safe…
Due to their severe operating conditions, many industrial components are subjected to complex combinations of cyclic mechanical stresses and thermal pressures. These combinations are responsible for the initiation and propagation of…
A three-parameters model for the interpolation of fatigue crack propagation data is proposed. It has been validated by a Literature data set obtained by testing 180 M(T) specimens under three different loading levels. In details, it is…
The present paper addresses experimentally the high temperature fatigue of 40CrMoV13.9 steel and the effect of surface roughness on fatigue strength and crack initiation. The 40CrMoV13.9 steel is widely used in different engineering high…
