Abstract
This work is devoted to the comparative analysis of three techniques for measurement of energy dissipation in metals under fatigue crack propagation: original contact heat flux sensor, post-processing of the infrared thermography data and lock-in thermography. The contact heat flux sensor allows real-time recording of the heat source value. Non-contact temperature measurements by infrared thermography techniques allows one to calculate the heat source field on the specimen surface using the solution of heat conductivity equation. Lock-in thermography is a well-established technique for measuring of the dissipated energy under cyclic loading based on the analysis of the second harmonic amplitude of the thermal signal. This paper deals with the V-notched flat specimens made of stainless steel AISE 304 subjected to cyclic loading. It was shown that the dissipated energy values estimated by different techniques have a good qualitative agreement. Contact and non-contact measurements can be used for investigation on energy dissipation either in combination or separately. The measured values allows one to propose a relation between the fatigue crack growth rate and dissipated heat near the crack tip.
Keywords
Article history
- ReceivedUntil the next stage: 21 days
- Revision requestedUntil the next stage: 7 days
- RevisedUntil the next stage: 0 days
- AcceptedUntil the next stage: 20 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2020 Alena Vedernikova, Anastasiia Iziumova, Aleksey Vshivkov, Oleg Plekhov.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Anastasiia Kostina, Maxim Zhelnin, Elena Gachegova, Alexander Prokhorov, Aleksei Vshivkov, Oleg Plekhov, Sathya Swaroop, Finite-element study of residual stress distribution in Ti-6Al-4V alloy treated by laser shock peening with varying parameters , Fracture and Structural Integrity: Vol 16 No 61 (2022): July 2022
- Oleg Plekhov, Anastasiya Kostina, Sergey Aizikovich, Numerical simulation of subsurface defect identification by pulsed thermography and improvement of this technique for noisy data , Fracture and Structural Integrity: Vol 13 No 50 (2019): October 2019
- Anastasiia Kostina, Maxim Zhelnin, Oleg Plekhov, Kirill Agutin, THM-coupled numerical analysis of temperature and groundwater level in-situ measurements in artificial ground freezing , Fracture and Structural Integrity: Vol 16 No 61 (2022): July 2022
- Aleksei Vshivkov, Oleg Plekhov, The effect of fatigue crack rate on the heat dissipation in metals under mixed-mode loading , Fracture and Structural Integrity: Vol 13 No 50 (2019): October 2019
- Anastasiia Kostina, Maxim Zhelnin, Oleg Plekhov, Numerical analysis of a caprock integrity during oil production by steam-assisted gravity drainage method , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Anastasiia Kostina, Maxim Zhelnin, Sathya Swaroop, Alena Vedernikova, Mariia Bartolomei, Finite-element simulation of residual stresses induced by laser shock peening in TC4 samples structurally similar to a turbine blade , Fracture and Structural Integrity: Vol 18 No 67 (2024): January 2024
- Anastasiya Kostina, Maxim Zelnin, Oleg Plekhov, Ivan Panteleev, Lev Levin, Michail Semin, An Applicability of Vyalov’s equations to ice wall strength estimation , Fracture and Structural Integrity: Vol 14 No 53 (2020): July 2020
- Aleksei Vshivkov, Oleg Plekhov, Anastasiia Iziumova, Aleksandr Zakharov, Valery Shlyannikov, The experimental study of heat dissipation during fatigue crack propagation under biaxial loading , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019
- Maxim Zhelnin, Anastasiia Kostina, Oleg Plekhov, Ivan Panteleev, Lev Levin, Numerical analysis of application limits of Vyalov’s formula for an ice-soil thickness , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Anastasiia Kostina, Oleg Plekhov, Sergey Aizikovich, Numerical simulation of a heat generation in a layered material during ultrasonic wave propagation , Fracture and Structural Integrity: Vol 12 No 46 (2018): October 2018