Structural Integrity

All Items

• Monitoring and analysis of reinforced concrete plate-column structure under room temperature and fire based on acoustic emission

  Dongye Wang, Yuli Dong, Dashan Zhang, Weihua Wang, Xin Lu

  236-251

• Multi-level Uncertain Fatigue Analysis of a Truss under Incomplete Available Information

  Raphael Basilio Pires Nonato

  17-37

• Natural Frequency based delamination estimation in GFRP beams using RSM and ANN

  T. G. Sreekanth, M. Senthilkumar, S. Manikanta Reddy

  487-495

• Nonlinear modeling of unreinforced masonry structures under seismic actions: validation using a building hit by the 2016 Central Italy earthquake

  Chiara Ferrero, Paulo Barbosa Lourenço, Chiara Calderini

  92-114

• Notch Sensitivity Study in U-notched Polymers Built by Additive Manufacturing (AM)

  Jorge Guillermo Diaz Rodriguez, Alberto David Pertuz Comas, Juan David Sandoval Herrera

  127-139

• Numerical analysis of a caprock integrity during oil production by steam-assisted gravity drainage method

  Anastasiia Kostina, Maxim Zhelnin, Oleg Plekhov

  302-313

• Numerical analysis of isolated end-flattened steel bars under compression in space trusses

  Henrique de Araujo Rosa Cruz, Luciano Mendes Bezerra, Welington Vital da Silva, Ramon Silva

  271-288

• Numerical analysis of repaired wall loss defect pipelines for optimum composite wrap thickness

  Muhammed Khaise, Silvio de Barros, Ney Rohem, Maria Banea, Sandip Budhe

  153-168

• Numerical and Experimental Analysis of Stacking Sequences Effects in Composite Mechanical Joints under Impact Loadings

  Pourya Fathi, Alireza Naddaf Oskouei, Khodadad Vahedi, Amin Moslemi Petrudi

  457-473

• Numerical and experimental study of the behavior of a polyamide during the ECAE process using a 105° die

  Habib Houari, Benaoumeur Aour, Salah Ramtani , Fayçal Benalia, Salma Barboura

  238-264

• Numerical assessment of the seismic vulnerability of the historical earthen remains of the Mansourah enclosure (Tlemcen, Algeria): influence of geometry and identification of critical damage zones

  Walid Hanini, Nadir Boumechra

  183-211

• A Numerical framework for fatigue lifetime prediction of complex welded structures

  Kris Hectors, Wim De Waele, Mia Loccufier, Hans De Backer

  552-566

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  26-53

• Numerical modeling of fracture processes of bodies with stress concentrators under conditions of proportional loading, taking into consideration the statistical distribution of ultimate strength and partial loss of load bearing capacity

  Eugeniia Feklistova, Artur Mugatarov, Valeriy Wildemann

  55-72

• Numerical nonlinear analysis of RC beans with un-strengthened and CFRP-strengthened opening drilled under service loads within shear zones

  Magdy Khalaf, L. Aboul-Nour, M. Khater, M. Ibrahim

  206-233

• Numerical study of eddy current by Finite Element Method for cracks detection in structures

  S. Harzallah, M. Chabaat, K. Chabane

  Pages 282-290

• Numerical study of semi-elliptical cracks in the critical position of pipe elbow

  Bassam Gamal Nasser Muthanna, Omar Bouledroua, Madjid Meriem-Benziane, Mohammed Hadj-Meliani, Guy Pluvinage, Rami Khalid Suleiman

  463-477

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  91-106

• NURBS-based kinematic limit analysis of FRP-reinforced masonry walls with out-of-plane loading

  Andrea Chiozzi, Nicola Grillanda, Gabriele Milani, Antonio Tralli

  9-23

• On local strength of a spherical vessel with pits distributed along the equator

  Daria Okulova, Liana Almazova, Olga Sedova, Yulia Pronina

  70-80

• On the assessment of non-metallic inclusions by part 13 of API 579 -1/ASME FFS-1 2016

  Jorge Luis González-Velázquez, Ehsan Entezari, Jerzy A. Szpunar

  105-114

• On the relationship between crack initiation angle and loading equivalent angle for asymmetric Three-Point Bend Specimens under mixed-mode I/II loading based on GMPZR criterion

  Mujebur Rehaman, Manjunath Patel Gowdru Chandrashekarappa, Mohan T R, Shashidhar K Kudari, Sharanaprabhu C M

  45-55

• Optimization of austenitic and ferritic steels for deep drawing. Part 1: metallurgical and mechanical analyses.

  Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Gerosa, Barbara Rivolta

  104-123

• Optimization of austenitic and ferritic steels for deep drawing. Part 2: FEM analyses with damage development.

  Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Andreotti, Barbara Rivolta

  179-199

• Optimization of damage repair with piezoelectric actuators using the Taguchi method

  Abdul Aabid Shaikh, Meftah Hriari, Jaffar Syed Mohamed Ali

  137-152

• Optimization of fractional composition of the excipient in the elastomeric covering for asphalt highways

  E.M. Nurullaev, A. S. Ermilov

  Pages 69-74

• Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling

  Tounsia Boudina, Dalila Benamara, Rebih Zaitri

  50-62

• Optimizing mechanical properties of AA7075 Metal Matrix Composites reinforced with TiB2 and ZrO2 particulates

  Nagaraj S. Dhongade, Vinod Kumar V. Meti, I. G. Siddhalingeshwar, G. U. Raju, M. A. Umarfarooq, N.R. Banapurmath, Ashok M. Sajjan, Vinayak S. Uppin, Balbir Singh

  1-19

• Parametric analysis on external dissipative link system for seismic protection of low rise r.c. buildings

  Mario Lucio Puppio, Martina Ferrini

  706-739

• Paths of interactive cracks in creep conditions

  K. Nowak

• Phase-field modeling for investigating the effect of rebar positioning and uniform versus non-uniform corrosion on concrete fracture

  Ba-Thanh Vu, Dac-Duc Nguyen, The-Truyen Tran, Duc-Nhiem Tran, Ngoc-Long Nguyen, Tien-Thanh Bui, Xuan-Lam Nguyen

  166-180

• Phenomenological models of residual mechanical properties of polymer composites under fatigue loading: review, analysis of descriptive ability and classification

  Oleg Staroverov, Artur Mugatarov, Anastasia Sivtseva, Valeriy Wildemann

  138-172

• Pipeline repair by composite patch under temperature and Pressure loading

  Elamine Abdelouahed, H. Benzaama, M. Mokhtari, B. Aour

  690-697

• Predicting Damage in Notched Functionally Graded Materials Plates through extended Finite Element Method based on computational simulations

  Hakim Siguerdjidjene, Amin Houari, Kouider Madani, Salah Amroune, Mohamed Mokhtari, Barhm Mohamad, Chellil Ahmed, Abdelkrim Merah, Raul Campilho

  1-23

• Predicting the strength of 3D-printed conductive composite under tensile load: A probabilistic modeling and experimental study

  Nassima Naboulsi, Fatima Majid, Taoufik Hachimi, Najoua Barhoumi, Kaouthar Khlifi, Soufyan Dadoun

  247-262

• Quantifying the out-of-plane response of unreinforced masonry walls subjected to relative support motion

  Michele Godio, Katrin Beyer

  194-208

• Railway overhead contact wire monitoring system by means of FBG sensors

  Erwin Ciro Zuleta, Carla Lupi, Ferdinando Felli, Claudio Paris, Cristian Vendittozzi

  246-258

• RC beams damaged by cracking and strengthened with NSM CFRP/GFRP rods

  Roberto Capozucca, Erica Magagnini, Maria Vittoria Vecchietti, Samir Khatir

  386-401

• Reliability-Based Design of Reinforced Concrete Beams for Simultaneous Bending, Shear, and Torsion Loadings

  Faezeh Jafari, Jalal Akbari

  136-150

• Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

  Abdelmalek Regad, Djebara Benzerga, Habib Berrekia, Abdelkader Haddi , Nourredine Chekhar

  115-122

• Research on differences and correlation between tensile, compression and flexural moduli of cement stabilized macadam

  Yi Yang, Jianlong Zheng, Songtao Lu

  Pages 339-349

• Research on parameters optimization of bilateral ring gear blank-holder in thick-plate fine blanking

  C.J. Su, X.H. Dong, S.M. Guo, Q. L.Li, T.T. Li

  pages 502-514

• Residual stress determination by blind hole drilling and local displacement mapping in aluminium alloy aerospace components

  Sviatoslav Eleonsky, Vladimir Pisarev, Eugene Statnik, Alexey Salimon, Alexander Korsunsky

  192-209

• Residual welding stress of I-section members beyond the limits of width-thickness ratio

  Zhiyuan Li, Zhiyun Zhao

  Pages 378-387

• Resonances detected on a historical tower under bells’ forced vibrations

  Dora Foti, Salvador Ivorra, Prof, Mariella Diaferio, Prof, David Bru, Prof, Vitantonio Vacca, Dr.

  203-215

• Restoring stone monuments: Enlightening critical details by the combined use of innovative sensing techniques

  Ermioni Pasiou

  560-572

• Retrofit assessment of masonry buildings through simplified structural analysis

  Mariateresa Guadagnuolo, Marianna Aurilio, Giuseppe Faella

  398-409

• Review of pressurized thermal shock studies of large scale reactor pressure vessels in Hungary

  Tamás Fekete

  Pages 99-111

• Rigid block and finite element analysis of settlement-induced failure mechanisms in historic masonry wall panels

  Raffaele Gagliardo, Lucrezia Cascini, Francesco Portioli, Raffaele Landolfo, Giovanni Tomaselli, Marialaura Malena, Gianmarco de Felice

  517-533

• Risk based analysis of RHPP penstock structural integrity

  Snežana Kirin, Lazar Jeremić, Aleksandar Sedmak, Igor Martić, Simon Sedmak, Ivana Vučetić, Tamara Golubović

  345-352