Materials mechanical behavior and image analysis

All Items

• Graphite nodules features identifications and damaging micromechanims in ductile irons

  Alberto De Santis, Daniela Iacoviello, Vittorio Di Cocco, Francesco Iacoviello

  Pages 12-21

• High Entropy Cantor Alloys (HEAs) modification induced by tungsten alligation, heat treatment and deep cold plastic deformation

  Andrea Brotzu, Stefano Natali, Zortea Laura, De Filippo Barbara

  309-320

• High-quality nodule analysis in spheroidal graphite cast iron using X-ray micro-computed tomography

  Juan Toledo, Felipe Diaz, Matías Peralta, Diego Fernandino

  279-288

• Identification of the anisotropic behavior of the laser welded Interstitial Free steel HC260Y subjected to uniaxial tensile tests

  Latifa Arfaoui, Amel Samet, Amna Znaidi

  282-293

• Impact behaviour of dissimilar AA2024-T351/7075-T651 FSWed butt-joints: effects of Al2O3-SiC particles addition

  Cindy Morales, Mattia Merlin, Annalisa Fortini, Gian Luca Garagnani, Argelia Miranda

  504-515

• Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites

  M. Ravikumar, Rudra Nail

  439-447

• The Impact of nanoparticles (B4C-Al2O3) on mechanical, wear, fracture behavior and machining properties of formwork grade Al7075 composites

  T. B. Prakash, M. Gangadharappa, Santhosh Somashekar, M. Ravikumar

  210-226

• Improvement of crack tip position estimation in DIC images by image processing methods

  Najat Zekriti, Fatima Majid, Hachimi Taoufik, Yassine Tounsi, Rajaa Rhanim, Ibrahim Mrani, Hassan Rhanim

  61-71

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  152-165

• Improvement of hydration products for self-compacting concrete by using magnetized water

  A.A. ELShami, Noura Essam, El-Shikh M. Yousry

  352-371

• Indentation Fracture Toughness of Aluminium-Graphite Composites: Influence of Nano-particles

  Ibrahim Alqahtani, B. Niyaz Ahmed, E. Ashoka, A. M. Rajesh, P. B. Bharath, Doddamani Saleemsab

  11-21

• Inelastic deformation and destruction of fiber-laminated polymer composites in stress concentration zones

  Elena Strungar, Valery Wildemann

  406-416

• Influence of 3d-printing parameters on the mechanical properties of 17-4PH stainless steel produced through Selective Laser Melting

  Francesca Romana Andreacola, Ilaria Capasso, Letizia Pilotti, Giuseppe Brando

  282-295

• Influence of Free Ferrite on the Mechanical Properties of High Strength Intercritical Austempered Ductile Iron

  Alejandro Daniel Basso, Martin Caldera, Nicolás Emanuel Tenaglia, Diego Fernandino, Roberto Enrique Boeri

  519-529

• Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP

  Dmitriy Lobanov, Stanislav Slovikov, Ekaterina Lunegova

  74-87

• Influence of Quenching Agents on Mechanical, Wear, and Fracture Characteristics of Al2O3 / MoS2 Reinforced Al-6061 Hybrid Metal Matrix Composite (MMCs)

  K. R. Suchendra, M. Sreenivasa Reddy; M. Ravikumar

  122-133

• Inverse problems with the digital image correlation: approach and applications

  Emanuele Sgambitterra, Fabrizio Niccoli

  300-320

• Investigation on Microstructure and Tensile Fractography of RE Oxides (CeO2/Y2O3) Reinforced AZ91D Magnesium Matrix Composites

  Santhosh Gotagunaki, Vardhaman S. Mudakappanavar, R. Suresh

  100-109

• Investigation on the tensile strength, hardness and wear properties in n-B4C reinforced Al7075 composites

  Ravikumar

  219-235

• Investigations on tool wear behavior in turning AISI 304 stainless steel: An empirical and neural network modeling approach

  Satish Chinchanikar, Mahendra Gadge

  176-191

• Machine learning-assisted fracture prediction: Integrating synthetic and experimental data for quasi-static notch failure analysis

  Sheikh Aamir Farooq, Danah Alajaleen, Jafar Albinmousa

  362-372

• Mathematical data processing according to digital image correlation method for polymer composites

  Dmitriy Lobanov, Elena Strungar

  56-65

• Mechanical and Fracture Characterization of Epoxy/PLA/Graphene/SiO2 Composites

  K. Dileep, A. Srinath, N.R. Banapurmath, M.A. Umarfarooq, A.M. Sajjan

  229-239

• Mechanical and Fractured surface characterization of epoxy/red mud/fly ash/ aluminium powder filled hybrid composites for automotive applications

  K. C. Anil , A.B. Hemavathi, A. Adeebpasha

  93-103

• Mechanical and tomographic characterisation of recycled Carbon Fibre Reinforced Polymer (rCFRP) using a fully mechanical environmentally friendly process

  Andrea Casaroli, Marco Virginio Boniardi, Edoardo Scabini

  89-106

• Mechanical behavior of fiber-glass plastic with hole pattern using digital image correlation and acoustic emission methods

  Elena Strungar, Dmitrii Lobanov, Ekaterina Chebotareva, Yaroslava Kochneva

  63-76

• Mechanical behavior of materials with a compact hexagonal structure obtained by an advanced identification strategy of HCP material, AZ31B-H24

  Rym Harbaoui, Olfa Daghfas, Amna Znaidi, Victor Tuninetti

  295-305

• Mechanical behaviour of sandy soils embankments treated with cement and reinforced with discrete elements (fibres)

  Yasmine Med Bouteben, Boudaoud Zeineddine

  174-186

• Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

  Sari Sharif Ali, Mahyar Arabani, Hassan Latifi

  187-197

• Mechanical Properties of SiC Nanoparticle-Reinforced Al-2024 Alloy

  M. B. Niyaz Ahmed, H. S. Naveen Kumar, Anilkumar S. Kallimani, Ibrahim Alqahtani, Saleemsab Doddamani, G. Hareesha

  148-161

• Mechanical, Fracture, and Thermal Characterization of Post-Cured Hybrid Epoxy Nanocomposites Reinforced with Graphene Nanoplatelets and h-Boron Nitride

  M.A. Umarfarooq, Mantesh Choukimath, N. R. Banapurmath

  22-36

• Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite Bimatallic components for lightweight design

  Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto

  289-301

• Microstructure and anisotropic tensile performance of 316L stainless steel manufactured by selective laser melting

  Lin Wang

  380-391

• Microstructure characterization of sustainable light weight concrete using trapped air additions.

  Said Maaty, Ahmed Elshami, Fryal Kamel

  194-211

• Microstructure, Mechanical and Fractographic behaviour of the Diffusion Welded Joints of AA2219 and Ti-6Al-4V for aerospace applications

  Manjunath Vatnalmath, V. Auradi, Bharath V Bharath, Anirudh Bharadwaj, Chetan Gowda, Madeva Nagaral

  37-48

• Modeling subgrain structure evolution during heat treatment

  Nikita Kondratev, Dmitry Bezverkhy, Matvej Baldin

  230-246

• Multimodal residual stress evaluation following one-sided dimpling in a Ti-6Al-4V alloy plate

  Igor Zorin, Vladimir Pisarev, Svyatoslav Eleonsky, Aleksandr Elkin; Galina Tyurina; Eugene Statnik, Alexey Salimon, Alexander Korsunsky

  1-12

• Notch Sensitivity Study in U-notched Polymers Built by Additive Manufacturing (AM)

  Jorge Guillermo Diaz Rodriguez, Alberto David Pertuz Comas, Juan David Sandoval Herrera

  127-139

• Numerical and experimental analysis of mechanical and fatigue properties of special shaped 3D printed sample

  David Juračka, David Bujdoš, Petr Lehner

  415-421

• Numerical investigation of an extra-deep drawing process with industrial parameters: formability analysis and process optimization

  Amina Belguebli, Ibrahim Zidane, Adel Hadj Amar, Abdessoufi Benhamou

  45-62

• Numerical investigation on strengthening steel beams with web openings using GFRP

  Hamda Guedaoura, Yazid Hadidane, Mohammed J Altaee

  26-53

• Numerical study of the plasticity effect on the behavior of short steel columns filled with concrete loaded axially

  Yousria Boulmaali-Hacene Chaouche, Nadia Kouider, Kamel Djeghaba, Bachir Kebaili

  91-106

• Optimization of austenitic and ferritic steels for deep drawing. Part 1: metallurgical and mechanical analyses.

  Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Gerosa, Barbara Rivolta

  104-123

• Optimization of austenitic and ferritic steels for deep drawing. Part 2: FEM analyses with damage development.

  Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Andreotti, Barbara Rivolta

  179-199

• Optimization of clamshell content for improved properties in bamboo-epoxy composites

  Anand K J, Thippeswamy Ekbote

  29-42

• Optimization of High-Performance-Concrete properties containing fine recycled aggregates using mixture design modeling

  Tounsia Boudina, Dalila Benamara, Rebih Zaitri

  50-62

• Optimizing mechanical properties of AA7075 Metal Matrix Composites reinforced with TiB2 and ZrO2 particulates

  Nagaraj S. Dhongade, Vinod Kumar V. Meti, I. G. Siddhalingeshwar, G. U. Raju, M. A. Umarfarooq, N.R. Banapurmath, Ashok M. Sajjan, Vinayak S. Uppin, Balbir Singh

  1-19

• Parameters Optimization for Manufacturing Advanced Self-Reinforced Composites based on Ultra-High Molecular Weight Polyethylene

  Eugene Statnik, Dmitry D. Zherebtsov, Dilus I. Chukov, Ilya I. Larin, Alnis A. Veveris, Valerii G. Torokhov, Alexander S. Kechekyan, Kristina Z. Myagkova, Iuliia A. Sadykova, Alexey I. Salimon, Alexander M. Korsunsky, Semen D. Ignatyev, Kamal M. Hammad, Sergey D. Kaloshkin

  152-164

• Phase-field modeling for investigating the effect of rebar positioning and uniform versus non-uniform corrosion on concrete fracture

  Ba-Thanh Vu, Dac-Duc Nguyen, The-Truyen Tran, Duc-Nhiem Tran, Ngoc-Long Nguyen, Tien-Thanh Bui, Xuan-Lam Nguyen

  166-180

• Predicting the strength of 3D-printed conductive composite under tensile load: A probabilistic modeling and experimental study

  Nassima Naboulsi, Fatima Majid, Taoufik Hachimi, Najoua Barhoumi, Kaouthar Khlifi, Soufyan Dadoun

  247-262