Abstract
The objective of this work was to characterize the full-field flexural behavior of composite sandwich beams. Finite element analysis was used to estimate the behavior of sandwich beams under three- and four-point-bending tests and were compared with experimental results obtained via digital image correlation and strain-gages. Two different core thicknesses and two different sandwich lengths were used to simulate short- and long-beam. Two distinct sandwich beams were fabricated by bonding basalt fiber reinforced polymer composite face sheets (laminates) to polyurethane core and aluminum face sheets glued to polyurethane core with an adhesive film. Full-strain-fields and flexural displacements were obtained by means of strain-gages and digital image correlation technique. Experimental results were in good agreement with predictions and digital image technique attested to be a complementary method to strain-gages in experimental full-strain-fields analysis.
Keywords
Article history
- ReceivedUntil the next stage: 45 days
- Revision requestedUntil the next stage: 38 days
- RevisedUntil the next stage: 1 day
- AcceptedUntil the next stage: 31 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2019 Rosa Marat-Mendes, Ricardo Martins, Alexandre Garcia, Luis Reis.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Carlos Vicente, João Fernandes, Augusto Deus, Maria Vaz, Marco Leite, Luis Reis, Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019
- Manuel de Freitas, Luis Reis, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Comparison between SSF and Critical-Plane models to predict fatigue lives under multiaxial proportional load histories , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Hugo Araújo, Marco Leite, AMR Ribeiro, Augusto M Deus, Luis Reis, M Fatima Vaz, Investigating the contribution of geometry on the failure of cellular core structures obtained by additive manufacturing , Fracture and Structural Integrity: Vol 13 No 49 (2019): July 2019
- Luis Reis, Joao Caxias, Henrique Soares, Pedro R. Costa, Vitor Anes, Manuel Freitas, Damage evaluation under complex fatigue loading conditions , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019