Sandwiches, Joints and Coatings

All Items

• A finite-element approach for the analysis of pin-bearing failure of composite laminates

  Michele Marino, Francesca Nerilli, Giuseppe Vairo

  pages 241-250

• A numerical model based on ALE formulation to predict crack propagation in sandwich structures

  Marco Francesco Funari, Fabrizio Greco, Paolo Lonetti, Saverio Spadea

  277-293

• Advanced techniques for estimation of the tensile fracture toughness of adhesive joints

  R.D.S.G. Campilho, M.D. Banea, L.F.M. da Silva

  pages 1-12

• Algorithm for automatic fatigue crack growth simulation on welded high strength steels

  Ricardo Miguel Gomes Simões Baptista, Virginia Infante, João Marques

  257-268

• An Investigation on the Free Vibration Behaviors of Additively Manufactured PA6 Layered Plates: Influences of Stacking Sequence, Infill Ratio, and Boundary Conditions

  Sinan Maraş, Çağın Bolat

  200-218

• Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L

  Gabriel Giannini de Cunto, Arnaldo Homobono Paes de Andrade, Waldemar Alfredo Monteiro

  Pages 332-338

• Assessment of structural integrity of subsea wellhead system: analytical and numerical study

  A.R. Maligno, R. Citarella, V.V. Silberschmidt, C. Soutis

  pages 97-119

• The Axial behaviour of Concrete Filled Double Skinned Steel Tubular (CFDST) column with concrete imperfections

  Arth J. Patel Patel, Sharadkumar P. Purohit

  1-14

• Characterization of the mechanical properties and microstructural evolution of martensitic steel in repeated tempering cycles

  Amitkumar Shelar, B. P. Ronge

  38-55

• Characterizations of TIG welded joints of Unalloyed Commercially Pure Titanium Gr-2 for Weld Process Parameters

  Hiralal S. Patil, D. C PATEL, C. S PATIL

  377-384

• Cold spray technology: future of coating deposition processes

  Harminder Singh, T.S. Sidhu, S.B.S. Kalsi

  pages 69-84

• Comparative study of multiaxial fatigue methods applied to welded joints in marine structures

  P.S. van Lieshout, J.H. den Besten, M.L. Kaminski

  173-192

• Comparison of behaviour of laterally loaded round and squared timber bolted joints

  Antonín Lokaj, Kristýna Klajmonová

  Pages 56-61

• Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints

  Paulo NB Reis, Ana Amaro, Altino Loureiro

  124-133

• Comparison of tensile strength and fracture toughness under mode I and II loading of co-cured and co-bonded CFRP joints

  Alessandro Pirondi, Fabrizio Moroni, Chiara Pernechele, Arturo Gaita, Luca Vescovi

  294-302

• Composite sandwich impact response: experimental and numerical analysis

  Filippo Cucinotta, Paolo Neri, Felice Sfravara, Armando Razionale

  367-382

• Computation of mode I strain energy release rate of symmetrical and asymmetrical sandwich structures using mixed finite element

  Amina Mohamed Ben Ali, Salah Bouziane, Hamoudi Bouzerd

  229-239

• Crack growth of explosive welding zirconium-steel bimetal subjected to cyclic bending

  D. Rozumek, Z. Marciniak

  Pages 40-45

• Crack initiation and propagation paths in small diameter FSW 6082-T6 aluminium tubes under fatigue loading

  Roberto Tovo, Luca Susmel, M. Neil James, Danie G. Hattingh, Enrico Maggiolini

  Pages 119-129

• Designing aluminium friction stir welded joints against multiaxial fatigue

  L. Susmel, D. G. Hattingh, M. N. James, E. Maggiolini, R. Tovo

  207-214

• Development of an optimal process for friction stir welding based on GA-RSM hybrid algorithm

  Nabi Mehri Khansari, Filippo Berto, Namdar Karimi, S.M.N Ghoreishi, Mahdi Fakoor, Mozhgan Mokari

  106-122

• Development of biodegradable magnesium alloy stents with coating

  Lorenza Petrini, Wei Wu, Dario Gastaldi, Lina Altomare, Silvia Farè, Francesco Migliavacca, Ali Gökhan Demir, Barbara Previtali, Maurizio Vedani

  pages 364-375

• Development of hybrid friction stir welding and adhesive bonding single lap joints in aluminium alloys

  Ricardo Leite Maciel, Virginia Infante, Daniel Braga, Pedro Moreira, Tiago Bento, Lucas da Silva

  269-285

• Effect of Additive Elements Bi/Ni/Ge on Crack Initiation and Propagation for Low-Ag Solders

  Noritake Hiyoshi, Mitsuo Yamashita, Hiroaki Hokazono

  25-33

• Effect of protective coatings on the water absorption and mechanical properties of 3D printed PLA

  Carlos Vicente, João Fernandes, Augusto Deus, Maria Vaz, Marco Leite, Luis Reis

  748-756

• Effect of steel reinforcement with different degree of corrosion on degeneration of mechanical performance of reinforced concrete frame joints

  Wu Xu, Liu Ronggui

  pages 481-491

• Effect of the Stress State on the Adhesive Strength of an Epoxy-Bonded Assembly

  Sergey Smirnov, Dmitry Konovalov, Irina Veretennikova, Aleksander Pestov, Viktoria Osipova

  311-325

• Effect of weld parameter on mechanical and metallurgical properties of dissimilar joints AA6082–AA6061 in T6 condition produced by FSW

  H. S. Patil, S. N. Soman

  Pages 151-160

• Effects of weld size on stress concentration factors of CHS-CFSHS joints

  Delei Yang, Lewei Tong

  45-52

• Evaluation of the increased load bearing capacity of steel beams strengthened with pre-stressed FRP laminates

  S. Bennati, D. Colonna, P.S. Valvo

  Pages 377-391

• Experimental and Numerical Analysis of Epoxy Based Adhesive Failure on Mono- and Bi-Material Single Lap Joints Under Different Displacement Rates

  Hojjat Ghahramanzadeh Asl, Salim Çam, Osman Orhan, Adnan Özel

  9-24

• Experimental and numerical investigation of gap K-joints of rectangular hollow section trusses

  Faycal Slimani, Mohammed Benzerara, Messaoud Saidani

  107-125

• Experimental characterization and numerical modelling analyses of nano-adhesive-bonded joints

  Fayssal Hadjez, Brahim Necib

  94-105

• Experimental examination of fatigue life of welded joint with stress concentration

  Miodrag Arsic, Zoran Savic, Aleksandar Sedmak, Srdjan Bosnjak, Simon Sedmak

  Pages 27-35

• Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061

  Chetan Patil, Hemant Patil, Hiralal Patil

  325-332

• Experimental investigation on mechanical behavior of sandwich structures using Digital Image Correlation (DIC)

  Amina Masmoudi, Abdelhak Khechai, Ahmed Bouaziz, Guerira Belhi, Afaf Zeroual, Yassine Adimi

  41-58

• Experimental tests on slip factor in friction joints: comparison between European and American Standards

  Emanuele Maiorana, Paolo Zampieri, Carlo Pellegrino

• Failure analysis of dissimilar single-lap joints

  F.A. Stuparu, D.A. Apostol, D.M. Constantinescu, M. Sandu, S. Sorohan

  Pages 69-77

• Fatigue assessment of Ti-6Al-4V titanium alloy laser welded joints in absence of filler material by means of full-field techniques

  Pasqualino Corigliano, Vincenzo Crupi, Eugenio Guglielmino, Carmine Maletta, Emanuele Sgambitterra, Giuseppe Barbieri, Fabrizia Caiazzo

  Pages 171-181

• Fatigue assessment of welded joints by means of the Strain Energy Density method: Numerical predictions and comparison with Eurocode 3 Numerical predictions and comparison with Eurocode 3

  Pietro Foti, Filippo Berto, Stefano Filippi

  104-125

• Fatigue crack growth in welded S355 specimens subjected to combined loadings

  Roberto Brighenti, Prof., Janusz Lewandowski, Prof., Dariusz Rozumek, Prof., Grzegorz Lesiuk, Prof.

  10-17

• Fatigue crack growth prediction in 2xxx AA with friction stir weld HAZ properties

  A. Tzamtzis, A. T. Kermanidis

  pages 396-404

• Fatigue crack propagation in welded joints X70

  Adel Deliou, Benattou Bouchouicha

  306-318

• Fatigue life assessment for a welded detail: advantages of a local energetic approach and experimental validation

  Luigi Viespoli, Filippo Berto, Aurelio Somà

  121-134

• Fatigue life assessment of a non-load carrying fillet joint considering the effects of a cyclic plasticity and weld bead shape

  S. Tsutsumi, K. Morita, R. Fincato, H. Momii

  Pages 240-250

• Fatigue life assessment of thin-walled welded joints under non-proportional load-time histories by the shear stress rate integral approach

  A. Bolchoun, C. M. Sonsino, H. Kaufmann, T. Melz

  Pages 162-169

• Fatigue life prediction of 5083 and 5A06 aluminum alloy T-welded joints based on the fatigue characteristics domain

  li zou, Xinhua Yang, Jianrong Tan, Hongji Xu, Yibo Sun

  43-66

• Fatigue life prediction of casing welded pipes by using the extended finite element method

  Ljubica Lazi? Vuli?evi?, Aleksandar Raji?, Aleksandar Grbovi?, Aleksandar Sedmak, Živ?e Šarko?evi?

  Pages 46-54

• Fatigue modelling for gas nitriding

  H. Weil, S. Jégou, L. Barrallier

  Pages 61-66

• Fatigue of weld ends under combined in- and out-of-phase multiaxial loading

  E. Shams, M. Vormwald

  Pages 114-120