Abstract
Fatigue design routines and computer codes must use some damage accumulation rule to deal with variable amplitude loadings (VAL), usually Palmgren-Miner (or Miner’s) linear rule for lack of a clearly better option. Nevertheless, fatigue lives are intrinsically sensitive to the order of VAL events, which may e.g. induce residual stresses and thus change the critical point stress state, much affecting its subsequent residual life. On the other hand, in general, non-linear damage accumulation rules are not robust, resulting in better predictions than Miner’s rule only for some specific load orders, requiring a case-by-case analysis. Therefore, Miner’s linear damage rule still is the usual choice in practical fatigue calculations and assessments, giving reasonable predictions at least when properly combined with approaches that sequentially consider plasticity-induced effects, following the critical point stress/strain history in a cycle-by-cycle basis. In this work, Miner’s rule is evaluated for non-proportional tension-torsion loadings on annealed tubular 316L stainless steel specimens. Normal-shear strain histories following either cross, diamond, circular or square paths are applied, and their fatigue lives are measured. Then, more complex VAL paths consisting of combinations of these individual path shapes are applied in other specimens, whose associated fatigue lives are predicted based on Miner’s rule.
Keywords
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2017 Fracture and Structural Integrity.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro, Is notch sensitivity a stress analysis problem? , Fracture and Structural Integrity: Vol 7 No 25 (2013): July 2013
- Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, Giancarlo Luis Gomez Gonzáles, Marco Antonio Meggiolaro, José Luiz de França Freire, On DIC measurements of DeltaKeff to verify if it is the FCG driving force , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Manuel de Freitas, Luis Reis, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Comparison between SSF and Critical-Plane models to predict fatigue lives under multiaxial proportional load histories , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Samuel Elias Ferreira, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro, A model to quantify fatigue crack growth by cyclic damage accumulation calculated by strip-yield procedures , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu, A two-step multiaxial racetrack filter algorithm for non-proportional load histories , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Verônica Miquelin Machado, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro, On short cracks that depart from elastoplastic notch tips , Fracture and Structural Integrity: Vol 11 No 41 (2017): July 2017
- Hao Wu, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Application of the Moment Of Inertia method to the Critical-Plane Approach , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha, Luiz Fernando Nazaré Marques, A unified rule to estimate multiaxial elastoplastic notch stresses and strains under in-phase proportional loadings , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu, Incorporation of Mean/Maximum Stress Effects in the Multiaxial Racetrack Filter , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu, A multiaxial incremental fatigue damage formulation using nested damage surfaces , Fracture and Structural Integrity: Vol 10 No 37 (2016): July 2016