Fracture under Mixed-Mode and Multiaxial Loading

All Items

• The “Projection-by-Projection” (PbP) criterion for multiaxial random fatigue loadings Guidelines to practical implementation

  Denis Benasciutti, Davide Zanellati, Alessandro Cristofori

  348-366

• 3D Analyses of crack propagation in torsion

  D. Shiozawa, Serrano Munoz, S. Dancette, C. Verdu, J. Lachambre, J.-Y. Buffiere

  pages 56-60

• 3D-mixed-mode-loading: material characteristic values and criteria’s validity

  H. A. Richard, A. Eberlein

  80-86

• A comparison of methods for calculating notch tip strains and stresses under multiaxial loading

  M. Lutovinov, J. ?erný, J. Papuga

  Pages 237-243

• A consistency assessment of coupled cohesive zone models for mixed-mode debonding problems

  R. Dimitri, M. Trullo, G. Zavarise, L. De Lorenzis

  pages 266-283

• A critical analysis of the Mises stress criterion used in frequency domain fatigue life prediction

  Adam Nieslony

  Pages 177-183

• A link between the peak stresses and the averaged strain energy density for cracks under mixed-mode (I+II) loading

  G. Meneghetti, B. Atzori, A. Campagnolo, F. Berto

• A method for calculation of finite fatigue life under multiaxial loading in high-cycle domain

  M. Malnati

  pages 12-18

• A multiaxial incremental fatigue damage formulation using nested damage surfaces

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu

  138-145

• A novel procedure for accurately measuring the Mode II fracture toughness of steel fiber reinforced self-compacting concrete

  Mennat-Allah Hossam El-Din, Mohamed Moawad, Seleem Ahmad, Ramy M. Reda

  200-212

• A probabilistic approach for multiaxial fatigue criteria

  M. Muñiz Calvente, S. Blasón, A. Fernández Canteli, A. de Jesús, J. Correia

  Pages 160-165

• A study of white etching crack formation by compression-torsion experiments

  S. Averbeck, E. Kerscher

  Pages 12-18

• A two-step multiaxial racetrack filter algorithm for non-proportional load histories

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu

  Pages 1-7

• A unified rule to estimate multiaxial elastoplastic notch stresses and strains under in-phase proportional loadings

  Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha, Luiz Fernando Nazaré Marques

  Pages 128-134

• Algorithm for automatic fatigue crack growth simulation on welded high strength steels

  Ricardo Miguel Gomes Simões Baptista, Virginia Infante, João Marques

  257-268

• An all-in-one numerical methodology for fretting wear and fatigue life assessment

  I. Llavori, M.A. Urchegui, W. Tato, X. Gomez

  87-93

• Analysis of fatigue behaviour of stainless steels under hydrogen influence

  D. Angelova, R. Yordanova, S. Yankova

  60-68

• Analysis of initial crack path in fretting fatigue

  J. Vazquez, S. Astorga, C. Navarro, J. Dominguez

  38-45

• Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint

  M. Ševcík, P. Hutar, A. P. Vassilopoulos, M. Shahverdi

• ANSYS implementation of the phase field fracture approach

  Dmitry Kosov, Andrey Tumanov, Valery Shlyannikov

  133-156

• Application of the Moment Of Inertia method to the Critical-Plane Approach

  Hao Wu, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

  Pages 99-105

• Atomistic modeling of different loading paths in single crystal copper and aluminum

  R. Pezer, I. Trapic

  Pages 191-197

• Averaged strain energy density estimated rapidly from the nodal stresses by FEM for cracks under mixed mode loadings including the T-stress contribution

  Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto

  53-64

• Averaged strain energy density-based synthesis of crack initiation life in notched steel bars under torsional fatigue

  Filippo Berto, Alberto Campagnolo, Giovanni Meneghetti, Keisuke Tanaka

  Pages 215-223

• Biaxial fatigue behavior of a powder metallurgical TRIP steel

  S. Ackermann, T. Lippmann, D. Kulawinski, S. Henkel, H. Biermann

• Biaxial fatigue tests and crack paths for AISI 304L stainless steel

  V. Chaves, C. Madrigal, A. Navarro

  pages 273-281

• Biaxial fatigue tests of notched specimens for AISI 304L stainless steel

  G. Beretta, V. Chaves, A. Navarro

  228-233

• Bond-slip analysis via a cohesive-zone model simulating damage, friction and interlocking

  R. Serpier, L. Varricchio, E. Sacco, G. Alfano

  pages 284-292

• Comparative study of multiaxial fatigue methods applied to welded joints in marine structures

  P.S. van Lieshout, J.H. den Besten, M.L. Kaminski

  173-192

• Comparison between SSF and Critical-Plane models to predict fatigue lives under multiaxial proportional load histories

  Manuel de Freitas, Luis Reis, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

  Pages 121-127

• Comparison of tensile strength and fracture toughness under mode I and II loading of co-cured and co-bonded CFRP joints

  Alessandro Pirondi, Fabrizio Moroni, Chiara Pernechele, Arturo Gaita, Luca Vescovi

  294-302

• Competition between microstructure and defect in multiaxial high cycle fatigue

  F. Morel, R. Guerchais, N. Saintier

  pages 404-414

• Computational simulation of biaxial fatigue behaviour of lotus-type porous material

  J. Kramberger, M. Sori, M. Sraml, S. Glodez

  153-159

• Coupled fracture modes under anti-plane loading

  Les P. Pook, F. Berto, A. Campagnolo

  108-113

• Crack front segmentation under combined mode I- and mode IIIloading

  A. Eberlein, H. A. Richard

  1-7

• Crack growth behavior of aluminum alloy 6061 T651 under uniaxial and biaxial planar testing condition

  S. Henkel, E. Liebelt, H. Biermann, S. Ackermann

• Crack initiation and early propagation plane orientation of 2A12-T4 aluminum alloy under tension-torsion fatigue loading including mean tensile stress

  Shi Xinhong, Zhang Jianyu, Xiao Qingshan, Liu Tianqi

  pages 441-448

• Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach

  Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto, Keisuke Tanaka

  Pages 8-15

• Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue

  Takamoto Itoh, Masao Sakane, Takahiro Morishita, Hiroshi Nakamura, Masahiro Takanashi

• Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing

  Nicholas R. Gates, Ali Fatemi

• Crack tip fields and mixed mode fracture behaviour of progressively drawn pearlitic steel

  J. Toribio, B. González, J.C. Matos

  pages 221-228

• Crack tip fields in elastic-plastic and mixed mode I+II+III conditions, finite elements simulations and modeling

  F. Fremy, S. Pommier, E. Galenne, S. Courtin

  pages 397-403

• Cracking directions in multiaxial low cycle fatigue at high and room temperatures

  Masao Sakane, Takamoto Itoh

  Pages 16-23

• Creep-fatigue life evaluation of high chromium ferritic steel under non-proportional loading

  T. Morishita, Y. Murakami, T. Itoh, H. Tanigawa

  Pages 281-288

• Critical plane approach to multiaxial variable amplitude fatigue loading

  Yingyu Wang, Luca Susmel

  pages 345-356

• Cruciform specimens used for determination of the influence of T-stress on fatigue crack growth with overloads on aluminum alloy Al 6061 T651

  Sebastian Henkel, Carl H. Wolf, Horst Biermann, Andreas Burgold, Meinhard Kuna

  135-143

• Damage evaluation under complex fatigue loading conditions

  Luis Reis, Joao Caxias, Henrique Soares, Pedro R. Costa, Vitor Anes, Manuel Freitas

  318-331

• Degradation analysis of dynamic properties for plain concrete structures under mixed-mode fracture conditions via an improved cohesive crack approach

  Umberto De Maio, Daniele Gaetano, Fabrizio Greco, Raimondo Luciano, Andrea Pranno

  422-439

• Design optimization of cruciform specimens for biaxial fatigue loading

  R. Baptista, R. A. Claudio, L. Reis, I. Guelho, M. Freitas, J. F. A. Madeira

  pages 118-126

• Designing aluminium friction stir welded joints against multiaxial fatigue

  L. Susmel, D. G. Hattingh, M. N. James, E. Maggiolini, R. Tovo

  207-214