Tip: use quotes for an exact phrase, e.g. "teacher education"
In the present article, a review of the complete characterization in different aggressive media of a Ti-6Al-4V titanium alloy, performed by the Structural Mechanics Laboratory of the University of Bergamo, is presented. The light alloy has…
The present study investigates the influence of corrosion exposure on the fatigue behavior of S460NL high-strength structural steel, a material that is frequently utilized in offshore and civil engineering structures. Accelerated corrosion…
Chemical reactions between carbon steel, water and chemical species produce corrosion layers (scales) on the internal surface of pipelines transporting hydrocarbons. Scales act as a diffusion barrier and prevent the progress of corrosion…
A durability method in view of cathodic protection is proposed to improve the corrosion fatigue resistance of AH 32 steel in seawater. By aid of corrosion fatigue tests, the effects of thermal spraying Zn (zinc) and Cr (chromium) coating…
Shape memory effect (SME) and the relation with corrosion behavior of Cu-Zn-Al Smart Memory Alloys (SMAs) were investigated using different techniques: Scanning Electron Microscopy equipped with an Energy Dispersive System, X-Ray…
Rebar corrosion significantly affects the overall performance and the service life of reinforced concrete (RC) structures due to the reduction in the bond strength between concrete and rebar, leading to the delamination of the concrete…
Slow strain rate stress corrosion test of X80 steel in the natural seawater are carried out to study to effect of dissolved oxygen on the sensitivity of stress corrosion. Scanning electron microscope (SEM) combined electrochemical…
In a series of applications, steel reinforced concrete structures are subjected to fatigue loads during their service life, what in most cases happens in corrosive environments. Surface treatments have been proved to represent proper…
Biodegradable stents are attracting the attention of many researchers in biomedical and materials research fields since they can absolve their specific function for the expected period of time and then gradually disappear. This feature…
This study presents a hybrid framework integrating a physics-based corrosion model with a feedforward neural network (FNN) to predict corrosion rates and estimate the remaining useful life (RUL) of industrial pressure vessels for…
This work consists of an experimental study on the ageing response and resulting properties of AA7050 plate material. New heat treatments are investigated for achieving a peak-aged temper, as a T6 temper may be said to be, that achieves…
Aluminum alloys are widely used in the automobile industry because of their excellent mechanical strength, low weight, and remarkable resistance to corrosion and wear. The purpose of this study is to investigate how the microstructure…
Beam-column joints which shoulders high-level and vertical shearing effect that maintains balance of beam and column end is the major component influencing the performance of the whole framework. Post earthquake investigation suggests that…
There have been incidents recently where stress corrosion cracking (SCC) observed in the dissimilar metal weld (DMW) joints connecting the reactor pressure vessel (RPV) nozzle with the hot leg pipe. Due to the complex microstructure and…
Reinforced concrete water storage tanks are civil engineering structures subject to very aggressive atmospheric conditions that expose them to harmful corrosion risk. This dangerous phenomenon caused by the penetration of chloride ions…
The present work focuses on the Tribological properties and corrosion behavior evaluation of sintered CoCrMo alloy. The CoCrMo alloy was elaborated by Powder metallurgy process at various sintering temperatures (1200°C, 1250°C and 1300°C).…
A Light Utility Helicopter (LUH), in the course of a training flight, leaving the ground during the taxi to take off, went into an uncontrolled rolling to the right; consequently the helicopter gradually laid down on the right side. The…
Reinforced concrete has a weakness for corrosion which can cause the concrete to crack and the concrete structure to fail. To overcome this problem, a self-healing concrete method is needed that can close cracks and inhibit the rate of…
The need for the fabrication of sustainable aluminium matrix composites (AMCs) is being sought after as practical alternatives to conventional metals and their alloys. This study was undertaken to investigate the effect of sustainable…
This note summarizes some recent investigation results on the behavior of corroded steel bolted joints under uniaxial fatigue loading. Fatigue test specimens, were made up using S355 structural steel plates joined together with preloaded…
In this paper, the effect of corrosion on the performance of the bonded composite patch repair in aluminum alloy A5083 marine structure was investigated using three dimensional finite element methods. To this end, two patches made in…
The paper is aimed at the indicative evaluation of the effect of random scatter of input parameters in case of durability of reinforced concrete bridge deck. The time to onset of corrosion of steel reinforcement of concrete bridge deck…
Semi–empirical notch sensitivity factors q have been widely used to properly account for notch effects in fatigue design for a long time. However, the intrinsically empirical nature of this old concept can be avoided by modeling it using…
The oxidation resistance of iron-based alloys depends on the formation of thin protective films consisting ofreaction products between the alloys and the ambient atmosphere. The high corrosion resistance of Fe-Cr-Mo alloys hasbeen…
Duplex stainless steels are widely used in industry. This is due to their higher strength compared to austenitic steels and to their higher toughness than ferritic steels. They also have good weldability and high resistance to stress…
In this work, the effects of chloride-induced corrosion on tempcore B400c and B450c steel grades are evaluated, in terms of corrosion resistance and mechanical characteristics, after the performance of Tensile and Low Cycle Fatigue…
The use of Ni-Ti alloys in the practice of endodontic comes from their important properties such as shape memory and superelasticity phenomena, good corrosion resistance and high compatibility with biological tissues. In the last twenty…
The company DRC (pipe repair Department) located within the SONATRACH Company of oil and gas in Algeria, which is responsible for the repair of pipelines for the transport of gas or crude petroleum, will rehabilitate old pipes that have…
The corrosion behavior of 304L stainless steel rebars in an alkaline solution simulating new concrete subjected to acid rain attack and a mildly to slightly acidic solution simulating corroded cover concrete that exposed the reinforcement…
This paper investigates the combined effect of corrosion and fatigue on the growth of cracks that arise from natural corrosion in steel bridges. It is shown that if these two effects need to be simultaneously analyzed. If not, then the…
Aluminum alloys having good mechanical properties are Al-Zn- Mg alloys (7xxx) and Al-Cu-Li alloys (Weldalite®). These alloys may be subjected to stress corrosion cracking. In order to overcome this problem the Al 7050 alloy has been…
The effect of processing parameters on the mechanical and metallurgical properties of dissimilar joints of AA6082–AA6061 produced by friction stir welding was analysed in this study. Different FSW samples were produced by varying the…
In this work, we investigate the behavior of wire ropes subject to corrosion damage. The method is based on accelerated corrosion. Decreasing ultimate force and a loss in rigidity was observed from the static tensile tests made on the…
Protection against metallic materials corrosion is one of the most important means to reduce both aintenance costs and environmental impact. In the last years new studies on chemical baths compositions and fluxes have been performed in…
This article presents the bending fatigue behavior and the scatter-band analysis of aluminum alloys under beneficial conditions of nano-clay-particles and heat-treating, compared to detrimental conditions of the mechanical stress and the…
Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of…
Nowadays, an increasing number of oil and gas transmission pipes are constructed with high-strength low alloy steels (HSLA); however, many of these pipelines suffer from different types of hydrogen damages, such as hydrogen-induced…
Magnesium (Mg) alloys are attractive as structural materials due to their light weight and high specific strength. It is well known that Mg alloy has hexagonal close-packed (HCP) structure and only basal slip or twinning can operate during…
In this work are discussed some experimental data about the obtaining of recast layers on the surface of high speed tool steel after electrical discharge treatment in electrolyte. The electrical discharge treatment of steel surface in…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
This paper considers an important topic, and one that is often poorly understood or misinterpreted, but which is a determining factor in many aspects of the service performance of metals (and other materials). Engineering components and…
Symmetric fatigue in two spring steels is investigated in three groups of specimens. One of the groups (Steel EN10270-1SH/ DIN 17223C – C 0.82%, Mn 0.76%, Si 0.26%) has experienced rotating-bending fatigue in air, and the other two groups…
The paper presents an experimental analysis of tracking the path of the cracks and crack growth in strengthened or repair reinforced concrete short corbels bonded by carbon fiber fabrics under static and dynamic loads. The reinforced short…
Symmetric fatigue in two spring steels is investigated in three groups of specimens. One of the groups (Steel EN10270-1SH/ DIN 17223C – C 0.82%, Mn 0.76%, Si 0.26%) has experienced rotating-bending fatigue in air, and the other two groups…
The effect of corrosion environment aggressiveness on the tensile mechanical properties degradation of AA2024-T3 was investigated. Tensile specimens were pre-corroded for various exposure times to different corrosive solutions, i.e.…
The effect of multiple shallow corrosion pits on the strength of a spherical vessel subjected to internal pressure is studied. The pits are considered both randomly and evenly distributed along the equator on the outer surface of the…
Various input variables, including corrosion time, fretting force, stress, lubrication, heat-treating, and nano-particles, were evaluated by modeling of stress-controlled fatigue lifetimes in AlSi12CuNiMg aluminum alloy of the engine…
The main aim of this study is to assess the effectiveness of a composite repair system in severely corroded circumferential welds in super duplex stainless steel pipes as a preventive measure against the premature corrosion damage at the…
This work aims at studying the creep behaviour of 15-15Ti(Si) austenitic steel, under uniaxial stress (range of 300-560 MPa), and its interaction with liquid lead. The steel was tested to verify its sensitivity to Liquid Metal…
Different structural and machine elements are used over the ages. These are subjected to various loads like static and dynamic load, temperature, corrosion etc. Due to the above-mentioned reasons, ageing of the structural elements occur.…
