Tip: use quotes for an exact phrase, e.g. "teacher education"
The crack growth behavior of the aluminum alloy 6061 T651 was investigated using cruciform specimens with a measurement area of 120 x 120 x 2 mm3 with two center crack configurations of the starting notch parallel to one of the loading…
Shape memory property characterizes the behavior of many Ti based and Cu based alloys (SMAs). In Cu-Zn-Al SMAs, the original shape recovering is due to a bcc phase that is stable at high temperature. After an appropriate cooling process…
Monitoring the energy release during fatigue tests of common engineering materials has been shown to give relevant information on fatigue properties, reducing the testing time and material consumption. During a static tensile test, it is…
In this study, we present a new implementation of the phase field fracture approach in the finite element code ANSYS and its numerical background. The framework is general, and is supported by addressing several classical 2D boundary value…
The main aim of the research work is to examine the fracture toughness of the dual phase steels prepared using the intermediate quenching method. The ferrite-martensite dual phase (DP) steel is produced using low carbon micro alloyed steel…
This paper discusses the phase shift effect occurring between two and more load channels of multiaxially loaded specimens. The discussion concludes that there is an extreme shortage of good experimental data that would prove the existence…
Multiaxial fatigue behavior is an important topic in critical structural components. In the present study the biaxial-planar fatigue behavior of a powder metallurgical TRIP steel (Transformation Induced Plasticity) was studied by taking…
The problem of constructing the multilevel physical model of inelastic deformation in steels allowing to take into consideration diffusionless solid-state phase (martensitic) transitions is considered. The model structure includes three…
In recent years, mechanical property of many SMA has improved in order to introduce these alloys in specific field of industry. Main examples of these alloys are the NiTi, Cu-Zn-Al and Cu-Al-Ni which are used in many fields of engineering…
The role of structural mechanisms responsible for the consequent staging of damage-failure transition as the combination and continuity of ductile and creep kinetics of the structure evolution and the modeling in dwell fatigue regime.…
This paper deals with the two-way shape memory effect (TWSME) induced on a strip of a nearequiatomic NiTi alloy by means of the shape memory cycling training method. This procedure is based on the deformation in martensite state to reach…
In this paper, the hot tearing behaviour in Al-(4.8?6)%Cu sand mould castings was preliminary investigated by means of microstructural examination and image analysis. A dog-bone pattern was employed for the realisation of the castings and…
In this study, an efficient computational method for modeling the transition from transgranular to intergranular fracture mechanisms based on phase field fracture theory is discussed. Structural heterogeneity of the material is modeled on…
A mathematical model of the thermal state of the metal in the run-out roller table continuous wide hot strip mill. The mathematical model takes into account heat generation due to the polymorphic ? ? ? transformation of supercooled…
Crack tip stress-induced phase transformation mechanisms in nickel-titanium alloys (NiTi) were analyzed by Digital Image Correlation (DIC), under fatigue loads. In particular, Single Edge Crack (SEC) specimens, obtained from a commercial…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
In order to correctly assess the biaxial fatigue material properties one must experimentally test different load conditions and stress levels. With the rise of new in-plane biaxial fatigue testing machines, using smaller and more efficient…
Rebar corrosion significantly affects the overall performance and the service life of reinforced concrete (RC) structures due to the reduction in the bond strength between concrete and rebar, leading to the delamination of the concrete…
While a long stable crack propagation phase was observed during experiments of complex welded components, very conservative assessments of the fatigue life were achieved in the past. The difference was explained by the stress gradient…
In this paper, a novel model for stress-induced martensitic transformations in shape-memory alloys is proposed. Accordingly, the constitutive pseudo-elastic behavior of these materials is described. The model accounts for the possible…
Structural components made of fibre-reinforced materials are frequently used in engineering applications. Fibre-reinforced composites are multiphase materials, and complex mechanical phenomena take place at limit conditions but also during…
During the braking phase, the heat produced by friction between pads and disc cannot be entirely dissipated. Consequently, the brake disc, especially if very hard braking occur, can accumulate large amounts of heat in a short time so…
A Light Utility Helicopter (LUH), in the course of a training flight, leaving the ground during the taxi to take off, went into an uncontrolled rolling to the right; consequently the helicopter gradually laid down on the right side. The…
For multiaxially-loaded parts several stress-based fatigue assessment concepts are applicable mostly taking uniaxial test results as basis. These approaches work well in case of proportional loading states, but on contrary, for…
This paper primarily aims to introduce different stiffness ratio requirements for hospital buildings of various structural styles, to achieve a new standard. The requirements of each stiffness ratio are analyzed, according to the…
The Acropolis monuments are globally recognized as a cultural heritage and a value belonging not only to Greece but also to Humanity. From 2000 the most recent phase of restoration in their history began by the “Acropolis Restoration…
The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X) is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five…
This study discusses fatigue properties of low carbon steel, type SS400 steel, under non-proportional loading. Multiaxial fatigue tests under proportional and non-proportional loading conditions with various stress amplitudes were carried…
In this work are discussed some experimental data about the obtaining of recast layers on the surface of high speed tool steel after electrical discharge treatment in electrolyte. The electrical discharge treatment of steel surface in…
T Multiaxial creep-fatigue tests under non-proportional loading conditions with various strain rates were carried out using a hollow cylinder specimen of a high chromium ferritic steel at 823K in air to discuss the influence of…
On the basis of the developed model of quasibrittle medium the brittle and quasibrittle failure of composite ceramic materials with zirconium dioxide matrix and various percentage of hardening particles of corundum are studied numerically.…
Since fatigue cracking is caused in the middle-temperature conditions due to the stresses from heavy traffic and as the bitumen plays a very important role in controlling this failure, therefore, in recent years, the production of the…
This paper summarizes the results of the through-thickness residual stress distributions on dissimilar metal weld (DMW) mock-up. DMWs, as welded joints between ferritic steels and either austenitic stainless steels or nickel-based alloys…
The fatigue strength evaluation and fracture behavior for a dual phase steel-AA6061-T6 bonded joints with three different adhesives (DC-80, Betamate 120 and MP55420) are presented in this paper. Single lap shear tests were used to…
The torsional fatigue behaviour of circumferentially notched specimens made of austenitic stainless steel, SUS316L, and carbon steel, SGV410, characterized by different notch root radii has been recently investigated by Tanaka. In that…
The influence of the joint line remnant (JLR) on tensile and fatigue fracture behaviour has been investigated in a friction stir welded Al-Mg-Sc alloy. JLR is one of the microstructural features formed in friction stir welds depending on…
Multiaxial fatigue failure criteria are formulated in time and frequency domain. The number of frequency domain criteria is rather small and the most popular one is the equivalent von Mises stress criterion. This criterion was elaborated…
Stress controlled multiaxial fatigue test was carried out using a hollow cylinder specimen of type 316 stainless steel. A newly developed fatigue testing machine which can apply push-pull loading and reversed torsion loading and inner…
The goal of this work is to propose a general mechanism for hydrogen induced crack initiation in steels based on a microstructural study of multiple steel grades. Four types of steels with strongly varying microstructures are studied for…
A series of cyclic tension-torsion tests under symmetric shear strain and asymmetric axial stress control in various loading paths are conducted on 100 ?m-diameter 316L steel wires applying a micro tensiontorsion fatigue testing apparatus.…
The Static Thermographic Method (STM) involves analyzing the thermal behavior of a specimen subjected to a quasi-static tensile test. The temperature trend, measured by an infrared camera, follows three phases where the first and second…
An edge crack propagation in a steel bar of circular cross-section undergoing multiaxial fatigue loads is simulated by Finite Element Method (FEM). The variation of crack growth behaviour is studied under axial and combined in phase…
The fatigue behaviour of circumferentially notched specimens made of titanium alloy, Ti-6Al-4V, has been analysed. To investigate the notch effect on the fatigue strength, pure bending, pure torsion and multiaxial bending-torsion fatigue…
The influence of the austenite (γ) phase fraction on the hydrogen embrittlement of duplex stainless steel is investigated. Heat treatments are performed to create two duplex stainless steel specimens, containing 50% and 44% of austenite…
Brittle fracture in carbon steel has a serious impact on the safety of steel structures. Thus, technology that arrests crack propagation is the final line of protection for such structures. It is such an important issue that conditions…
This study aims to analyze the effect of thermo mechanical coupling damage in the presence of a phase change (austenite/martensite) in 35NCD16 steel. The impact of increasing mechanical traction load, accompanied by a martensitic…
This paper presents a novel modification of the multilevel statistical model for describing the subgrain boundary migration that can explicitly account for the topology of subgrain structures in the form of Laguerre polyhedra. The…
The goal of this work is to improve the understanding of the relation between the microstructural characteristics of Intercritical Austempered Ductile Cast Iron (IADI) and the damage micromechanisms observed during its tensile loading. The…
In this paper, a previously developed modification of the Sainz model of multiaxial fatigue is reduced to an invariant form. Model constants were determined for different sets of setup experiments. It was supposed to introduce an…
Aim of the paper is to present a one dimensional simple model for the study of the bond behavior of Fabric Reinforced Cementitious Matrix (FRCM) strengthening systems externally applied to structural substrates. The equilibrium of an…
