Tip: use quotes for an exact phrase, e.g. "teacher education"
This paper analyses how the microstructure of an eutectoid pearlitic steel affects its conventional mechanical properties (obtained by means of a standard tension test) and the associated micromechanisms of fracture. Results show how the…
This study aims at providing a better understanding of the effects of both microstructure and defect on the high cycle fatigue behavior of metallic alloys using finite element simulations of polycrystalline aggregates. It is well known…
This paper predicts the tension strength of Concrete-filled Branch Plate-to-Rectangular Hollow (CBPRH) joint by conducting experimental and theoretical analysis. A total of 46 X-joints with different geometric parameters were investigated…
The aim of the present research is to check the accuracy of the Modified Wöhler Curve Method (MWCM) in estimating the fatigue strength of friction stir (FS) welded tubular joints of Al 6082-T6 subjected to in-phase and out-of-phase…
The modified disk shaped compact tension test is a configuration derived from standard compact tension test that is used for measuring fracture mechanical properties of primarily metallic materials. The compact tension configuration is…
The purpose of this study is to devise a bending fatigue strength evaluation method that can be widely used for any machine component under the consideration that bending fatigue breakage depends on the initiation of a surface fatigue…
Cement and concrete composites are inherently brittle and exhibit very less tensile/flexural strength capacity as compared to their compressive strength. Use of thoroughly dispersed carbon nanotubes in the concrete matrix is one of the…
This study concerns the multiaxial static and fatigue strength properties. Short-glass-fibre-reinforced phenolic-resin composites (SGP) molded by injection and compression processes were subjected to tensiontorsion combined static and…
This paper experimentally investigates the effect of steel and glass fibers on the engineering properties of concrete. To achieve this, 0.3%, 0.6%, and 0.9% by volume fraction of steel and glass fibers are added in concrete mixtures with…
Based on the variation principle of Jourdan was developed a mathematical model of the process of widening freely in hot rolling of thin sheet metal. The principle applies to rigid-plastic materials and for the cinematically admissible area…
The aim of the paper was investigation crack initiation and fracture features developed during compression of Fe-based bulk metallic glass (BMG). These Fe-based BMG has received great attention as a new class of structural material due to…
For multiaxially-loaded parts several stress-based fatigue assessment concepts are applicable mostly taking uniaxial test results as basis. These approaches work well in case of proportional loading states, but on contrary, for…
In the present investigation in-plane anisotropy in tensile and ratcheting behavior of cold rolled and annealed commercially pure titanium plate has been studied. Flat tensile and fatigue test specimen oriented at 0, 45, and 90 degree to…
The paper studies the adhesive strength of aluminum alloy specimens bonded with the use of an epoxy adhesive, under the tensile-shear stress state, depending on the testing temperature. Tension of modified Arcan specimens with load angles…
In the design of adhesive structures, it is extremely important to accurately predict their strength and fracture properties (critical strain energy release rate in tension, GIC, and shear, GIIC). In most cases, the loads occur in…
The present paper investigates the multiaxial fatigue strength of sharp V-notched components made of titanium grade 5 alloy (Ti-6Al-4V). Axisymmetric notched specimens have been tested under combined tension and torsion fatigue loadings…
This study investigates the modification of epoxy resins with pyrolysis bio-oils derived from plant waste, aiming to enhance mechanical performance. A method for epoxy resin modification using bio-oil is proposed, including techniques for…
This work deals with the notch sensitivity of sharp notches under multi-axial fatigue loading. The main discussion concerns the differences in notch sensitivity at high cycle fatigue regime, between tensile, torsional and combined loading.…
Multiaxial fatigue failure criteria are formulated in time and frequency domain. The number of frequency domain criteria is rather small and the most popular one is the equivalent von Mises stress criterion. This criterion was elaborated…
Statistical Fracture Mechanics, formalism of few natural ideas is applied to simulation of cracktrajectories in brittle material. The “diffusion approximation” of the crack diffusion model represents cracktrajectories as a one-dimensional…
This paper presents a numerical method for non-local stress assessment by means of a general FE tool and the local stress field. Unlike usual calculations by means of a numerical PDE solver, a more general numerical integration is used.…
The present paper investigates the accuracy of the Modified Wöhler Curve Method (MWCM) in estimating multiaxial fatigue strength of aluminium friction stir (FS) welded joints. Having developed a bespoke joining technology…
The mechanical and nanomechanical properties of multi-walled carbon nanotube-reinforced polypropylene (MWCNT/PP) nanocomposite were investigated through tension tests (conducted on 2 wt% and 5 wt% specimens) and nanoindentation tests…
This work focuses on the mechanical characterization of the inorganic matrix used for Fiber-Reinforced Cementitious Matrix (FRCM) composites, nowadays widely used to retrofit existing reinforced concrete and masonry structures. While…
In the present work, the fracture toughness (KIC) of full-depth (FD) fiber-reinforced concrete (FRC) and layered functionally graded concrete (FGC) matrix cracked (MC) beams has been determined by the equivalent relationships of the…
In this study, the relationships between processing, structure and properties of self-reinforced ultra-high molecular weight polyethylene (UHMWPE) composites fabricated via thermal pressing are investigated. By systematically varying…
SS 316Ti is widely used in bellows industry and is a good candidate material for high temperature bellows in sodium cooled fast reactor (SFR) systems. Typical operating temperature experienced by SFR systems is around 823K. Design of…
The article presents the results of computational and experimental studies of the strength and damageability of a connecting composite part in a metal-composite joint of isogrid and anisogrid structures made of polymer composite material…
The work is devoted to the experimental study of mechanical behavior regularities of the structural steel 40Cr under postcritical deformation of specimens in conditions of strain localization formation in the form of neck during extension.…
To evaluate the integrity of a structure consists to prove his ability to perform his mechanical functions for all modes of loading, normal or accidental, and throughout its lifespan. In the context of nuclear safety, for the most…
Nowadays, any structure must have strength, robustness and lightness, which has increased the industrial interest and research efforts in adhesive joining, mainly in the improvement of strength and fracture properties of adhesives. Thus…
A detailed investigation was conducted into the fracture mechanisms of cylindrical specimens made of a polycrystalline heat-resistant nickel-based alloy XH73MBTU-VD (EI698-VD), under uniaxial tension in the temperature range of 25–700°C.…
This study aims to evaluate the effect of various parameters on the behavior of the reinforced concrete flat slabs and the contribution of each design element in the punching shear strength. This research presents experimental results of…
The present paper addresses experimentally the high temperature fatigue of 40CrMoV13.9 steel and the effect of surface roughness on fatigue strength and crack initiation. The 40CrMoV13.9 steel is widely used in different engineering high…
An experimental technique is presented to evaluate mechanical and thermal load-induced microstructural damage, based on the Electron Probe Micro-Analysis (EPMA) principle, by which certain analytical potentialities of Scanning Electron…
In this paper, tensile tests of specimens with a pattern of holes made of fiber-glass plastic based on combined epoxy and phenol-formaldehyde resins are carried out in order to study the processes of damage accumulation and tension…
Rebar corrosion significantly affects the overall performance and the service life of reinforced concrete (RC) structures due to the reduction in the bond strength between concrete and rebar, leading to the delamination of the concrete…
It is known that the initial waviness of the fiber affects the stiffness characteristics and strength of the polymer composite material. The article presents a continuum model taking into account the nonlinearity of the longitudinal…
This research investigates cracking in Reinforced Concrete Structures (RCS), particularly in bridge abutments, box girders, and culverts. Cracks often appear even after the concrete has reached its full strength. The current American…
Plastic η factor is adopted to account crack tip plasticity while evaluating the fracture toughness of the materials as per ASTM E1820. It is valid only for homogeneous materials. The plastic η factor for compact tension geometry (CT) with…
Considering the fragility of ultra-thin foil material, the machining methods might bring in undesired and non-neglectable damage, which would affect the uniaxial tensile properties of such material. This presented work systematically…
Polymers are known to be sensitive to aging; their lifetime can be predicted through experimental tests. The present paper presents an experimental study on the long-term performance of polymethyl methacrylate (PMMA) exposed to solar and…
This paper explores the effect of internal technological defects on the fatigue life of carbon fiber reinforced plastic (CFRP) under simple loading waveforms. One conducted experiments on CFRP specimens with embedded artificial defects…
The paper investigates the use of 3D-printed components made from Polylactic Acid (PLA) for the restoration of architectural and ornamental elements, focusing on architectural/structural components. The material PLA was chosen for its…
Concrete is a porous material containing aggregate of different sizes, hardened cement matrix with air pores, microcracks and water. Concrete internal structure is different from that of other engineering materials. Furthermore concrete is…
Reinforced concrete water storage tanks are civil engineering structures subject to very aggressive atmospheric conditions that expose them to harmful corrosion risk. This dangerous phenomenon caused by the penetration of chloride ions…
