Tip: use quotes for an exact phrase, e.g. "teacher education"
The usage of rebars in construction is the most common method for reinforcing plain concrete and thus bridging the tensile stresses along the concrete crack surfaces. Usually design codes for modelling the bond behaviour of rebars and…
The Boussinesq solution, one of the fundamental problems in the theory of elasticity, enables an analysis of stresses and strains (displacements) in a semi-elastic space subject to surface loads. This solution has a form of formulas for…
This work aims at studying the creep behaviour of 15-15Ti(Si) austenitic steel, under uniaxial stress (range of 300-560 MPa), and its interaction with liquid lead. The steel was tested to verify its sensitivity to Liquid Metal…
Residual stresses are often inevitably introduced into the material during the fabrication processes, such as welding, and are known to have significant effects on the subsequent fatigue crack growth behavior of welded structures. In this…
Due to their simplicity, cohesive zone models (CZMs) are very attractive to describe mixed-mode failure and debonding processes of materials and interfaces. Although a large number of coupled CZMs have been proposed, and despite the…
The paper examines a static bending of porous functional plates (FGP) and rectangular plate solutions, based on an underlying high-order shear deformation theory. The proposed high-order shear deformation theory, as opposed to other…
The linear elastic analysis of cracked bodies is a Twentieth Century development, with the first papers appearing in 1907, but it was not until the introduction of the stress intensity factor concept in 1957 that widespread application to…
The aim of the present paper is to systematically investigate the accuracy of the so-called Modified Wöhler Curve Method (MWCM) in estimating high-cycle fatigue strength of plain and notched engineering materials damaged by in-service…
Sensitivity to small defects under torsional fatigue loading condition is examined in the high cycle fatigue regime. Fatigue crack initiation and small crack growth behaviors were observed during fatigue testing and fractographic…
The damage development due to externally applied mechanical stress is a hot topic of interest involving several applications of everyday life, like civil engineering, monument restoration, construction evaluation and health monitoring.…
Within the framework of a geomechanical model that describes the deformation of a rock mass during the subhorizontal coal-bed extraction, the mechanism for the formation and implementation of a sudden outburst is substantiated: as working…
The present paper is concerned with the formulation of an elasto-plastic strain based approach suitable for assessing fatigue strength of notched components subjected to in-service variable amplitude cyclic loading. The hypothesis is…
Fatigue surface crack growth and the in-plane and out-of-plane constraint effects are studied through experiments and computations for aluminium alloy D16T. Subjects for studies are cruciform specimens under different biaxial loading and…
Stress and displacement fields in multilayered composites with interfacial imperfections, such as imperfect bonding of the layers or delaminations, or where the plies are separated by thin interlayers allowing relative motion, have large…
Numerical simulation by plastic deformation of the shaping processes currently has a large industrial interest. It allows you to shorten the time of design and construction related products and tools to analyze and to optimize processes.…
The reliability of printed circuit boards under dynamic loads is a key issue in the handheld electronic products industry. In order to predict the performance of the boards in their application lifetime, different tests were developed. The…
Many engineering structures are exposed to non-proportional fatigue loading. However, at the critical location of crack initiation, often only one of the load sequences dominates – the individual load cases result in different crack…
A 3D mixed beam finite element is presented, modeling the warping of the cross-sections as an independent kinematic field. The beam formulation is derived on the basis of the Hu-Washizu variational principle, expressed as function of four…
The realization of a connection between a ceramic and a metal is always accompanied by the creation of a multi-axial stress field. Different physical and mechanical origins explain the genesis of stresses at the bonding interface in the…
Enrico Mattei, the President of the Italian oil conglomerate, ENI, was about to land in Milan Linate Airport on October 27, 1962 when his airplane crashed on the ground due to a then unexplained accident. The investigation, reopened more…
In this study, a numerical strategy for predictive modelling of creep in tension tests for the rectangular plate with a single crack and CT-specimen based on the extended finite element method (XFEM) will be described in detail. A model of…
The existence of three-dimensional effects at cracks has been known for many years, but understanding has been limited, and for some situations still is. Understanding improved when the existence of corner point singularities and their…
The prosthetic liner plays a significant role in the redistribution of the pressure between the stump and the socket, as it adding a cushioning layer between the stump and the socket which relieves pain and makes the prosthesis more…
A complete set of eigensolutions is constructed for different variants of circular conical bodies: homogeneous cone with one lateral surface (solid cone), homogeneous cone with two lateral surfaces (hollow cone) and composite cone for…
We analyse the problem of a simply supported beam, strengthened with a fibre-reinforced polymer (FRP) strip bonded to its intrados and subjected to bending couples applied to its end sections. A mechanical model is proposed, whereby the…
In this paper, a previously developed modification of the Sainz model of multiaxial fatigue is reduced to an invariant form. Model constants were determined for different sets of setup experiments. It was supposed to introduce an…
In this investigation, fatigue criterion was established to predict crack-initiation at the tip of a notch in aged hardening aluminum alloy. This criterion was used to predict the residual lifetime in aeronautical structures using concept…
Elastic fracture mechanics commonly defines the fracture resistance of brittle materials within an idealised picture of planar and traction free cracks. An efficient approach to describe the interface conditions in real cracks, such as…
The present study of Ti6Al4V alloy production via Electron Beam Melting (EBM) represents a cutting-edge research topic impacting different strategic engineering applications. This can be attributed to the widespread use of this alloy and…
Additive Manufacturing (AM) is a technological process in which elements are fruitfully built up adding materials layer by layer. AM had a massive development in recent times, thanks to its intrinsic advantages, especially if compared with…
The research addresses evaluation of stress-strain state (SSS) in the “zygomatic bones–implants–denture base” system by varying the type and number of the zygomatic implants, as well as applying loads. The load magnitude was varied over a…
A three-dimensional (3D) general upper-bound limit analysis procedure for the determination of the collapse load of out-of-plane loaded masonry walls with Fiber Reinforced Polymer (FRP) reinforcement strips is presented. The geometry of a…
This is the second part of a short three-paper series, aiming to revisit some classical concepts of Linear Elastic Fracture Mechanics. Being the intermediate step of the analysis between infinite domains (discussed in Part-I) and finite…
Experimental method for a characterization of high-cycle fatigue evolution of residual stress near cold-expanded hole is developed and implemented. The technique is based on simultaneous measurements of deformation response to narrow…
This paper deals with the influence of interference fit coupling on the fatigue strength of holed plates. The effect was investigated both experimentally and numerically. Axial fatigue tests have been carried out on holed specimens made of…
This research discusses the micromechanical modelling for thermoplastic composite material. Elastoplastic and damage model for PEEK matrix composite with the dependency of properties to stress state is presented. Plasticity initiation…
The deformation behaviour and fracture mechanisms of high-density polyethylene (HDPE), polypropylene (PP) and polyamide 6 (PA 6) are investigated experimentally under different stress states and at different crosshead speeds of 1, 20 and…
History of studies of fracture is inherently intermingled with the history of technology developments. In the beginning very little was written about. We must credit Leonardo and Galileo as the first ones that wrote about the problem and…
The paper presents the results of comparative studies of short-term creep in tensile tests of the VT1-0 commercially pure titanium (analogue Grade 2 according to ASTM A485) and the VT5-1 alloy (analogue Grade 6 according to ASTM B265) in…
The use of elastomers has become increasingly important in a variety of industries, including automotive, medical, and food packaging. The adaptability of elastomers to different mechanical stresses has made them a popular choice for these…
Since fatigue cracking is caused in the middle-temperature conditions due to the stresses from heavy traffic and as the bitumen plays a very important role in controlling this failure, therefore, in recent years, the production of the…
This work describes a two-dimensional numerical model that allows detecting the appearance of cracks and calculating their propagation in elements made of laminated bamboo, under tension and shear. This composite material has long parallel…
Due to their severe operating conditions, many industrial components are subjected to complex combinations of cyclic mechanical stresses and thermal pressures. These combinations are responsible for the initiation and propagation of…
The stepped isostress method (SSM) is an advanced technique which allows the prediction of the long-term behavior and enables the construction of creep master curves of materials with short-term experimental tests. However, the performance…
This paper investigates the use of digital image correlation (DIC) and finite element analysis for strain measurement on Printed Board Circuits (PCBs). Circuit boards (PCBs) are designed to mechanically support and electrically connect an…
In the present paper, fatigue tests were performed on sand-blasted AlSi10Mg samples produced by Direct Metal Laser Sintering (DMLS). The effect of sand-blasting on surface properties was evaluated by roughness and residual stresses…
In this paper, a novel coupled elastoplastic damage model for coal-rock is proposed to predict the deformation and potential disaster in coal mining. The conditions of small deformation and thermodynamic potential are considered, as well…
A refined and simple shear deformation theory for mechanical buckling of composite plate resting on two-parameter Pasternak’s foundations is developed. The displacement field is chosen based on assumptions that the in-plane and transverse…
The role of some geometrical characteristics of the notches machined in circular discs, in order to determine the mode-I fracture toughness of brittle materials, is discussed. The study is implemented both analytically and numerically.…
In this work, the effects of chloride-induced corrosion on tempcore B400c and B450c steel grades are evaluated, in terms of corrosion resistance and mechanical characteristics, after the performance of Tensile and Low Cycle Fatigue…
