Tip: use quotes for an exact phrase, e.g. "teacher education"
The publication presents a cruciform specimen for the determination of cyclic crack growth data under biaxial loading. The design of the specimen with slotted loading arms allows good decoupling between the two loading directions. For…
A lot of trans-femoral amputation patients experience skin breakdown due to the pressures and shear stresses in the stump-prosthesis interface. In this study, a finite element model was employed to investigate the stresses at the stump…
This is the second part of a short three-paper series, aiming to revisit some classical concepts of Linear Elastic Fracture Mechanics. Being the intermediate step of the analysis between infinite domains (discussed in Part-I) and finite…
Nanostructured adhesives may be defined as those materials whose elements imbedded in an epoxy matrix have dimensions in the 1 to 100 nm range. One of the most interesting aspects of ceramic nanoparticles is that their mechanical…
The novel destructive method is implemented for quantitative assessment of fatigue damage accumulation in the stress concentration zone accompanied by residual stress due to cold expansion of the through-thickness hole. Damage accumulation…
Localized displacement measurements based on electronic speckle-pattern interferometry are used to obtain crack mouth opening displacement (CMOD), stress intensity factor (SIF) and T-stress values during crack growth around cold-expanded…
Digital image correlation (DIC) is a technique in experimental mechanics to acquire full-field measurement data of displacements and deformations from the surface of specimens or components. Especially for the investigations of cracks it…
In this paper, determination of the accurate notch stress intensity factors (NSIFs) have been demonstrated using a recently proposed technique: The point substitution displacement technique (PSDT) for the sharp Vnotched configurations. In…
The present work summarizes a numerical procedure aimed at the evaluation of the residual strength of a cracked lap joint, based on the competing failure mechanisms regulated by the R-curve analysis and plastic collapse. The model adopted…
A numerical study on the influence of contact parameters on fretting fatigue behavior is carried out by using a new method SFEM (Stretching Finite Element Method) is presented in this article. Several parameters are made to vary: geometric…
In the present work, the stress intensity factor (SIF) of a small embedded square-like flaw is calculated by means of a procedure based on the Oore-Burns integral. An explicit equation is given to evaluate the SIF along the two axes of…
Most mechanical components experience multi-axial cyclic loading conditions during service. Experimental analysis of fatigue cracks under such conditions is not easy and most works tend to focus more on the simpler but less realistic case…
The minimum plastic zone radius (MPZR) criterion is one of the recent criterions to estimate crack initiation direction under mixed mode loading. The MPZR theory is based on the theoretical computations of plastic zone size (PZS). In this…
In this paper we investigated the influence of consecutive dynamic and gigacycle fatigue loads on the lifetime of aluminum-magnesium alloy AlMg6. Preloading of samples was achieved during dynamic tensile tests in the split-Hopkinson bar…
Fatigue surface crack growth and the in-plane and out-of-plane constraint effects are studied through experiments and computations for aluminium alloy D16T. Subjects for studies are cruciform specimens under different biaxial loading and…
The Compact Tension Shear (CTS) specimen is used to study fracture and fatigue under mixed mode I/II loading conditions. Existing K solution was developed for fracture studies and it does not consider the effect of crack deflection. The…
In mixed-mode conditions, the competing contribution of the different stress intensity factors predicts fracture initiation load as well as crack propagation direction. Commonly, mixed-mode fracture resistance is based on the assumption of…
The extended finite element (XFEM) method has been used to simulate fatigue crack growth in casing pipe, made of API J55 steel by high-frequency welding, in order estimate its structural integrity and life. Based on the critical value of…
The premature contact of crack surfaces attributable to the near-tip plastic deformations under cyclic loading, which is commonly referred to as plasticity induced crack closure (PICC), has long been focused as supposedly controlling…
Closure-free long cracks under the remote mode III loading grow in a more complicated way than those under the remote mode II. For bcc metals, a coplanar in-plane spreading of tongues driven by the local mode II loading components at…
In this study, experimental and numerical results of compact tension shear (CTS) specimen and a new specimen type under in-plane mixed mode (Mode-I/II) loading conditions are compared with existing inplane mixed mode fracture criteria to…
The existence of three-dimensional effects at cracks has been known for many years, but understanding has been limited, and for some situations still is. Understanding improved when the existence of corner point singularities and their…
The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X) is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five…
In the present work, the fracture performance of pre-cracked reinforced concrete beams was investigated numerically and experimentally. Experimental and numerical programs were designed to examine the effect of beam width, b, (120 and 250…
This study represents a methodology to assess the probability of failure based on three the driving force formulations defined by the corresponding brittle and ductile fracture criteria for compact and bending specimens made of 34XH3MA and…
This study has used the strain energy density (SED) approach to evaluate the stress intensity factor (SIF) of cracked cruciform welded joints in Hardox 450 steel. A microstructural analysis was made of Hardox 450 steel which is composed of…
The influence of fiber orientation on the crack propagation behavior was studied with single edgenotched specimens which were cut from an injection-molded plate of short-fiber reinforced plastics of polyphenylenesulphide (PPS) reinforced…
In fracture mechanics (domain of cracked environments), it is concerned to forecast the behavior of the structures until their ruin. Friction Stir Welding (FSW) is a new process for solid-state joining, it can weld high strength aluminum…
Redundant data obtained under quasi-constant {DeltaK, Kmax} loading conditions is used to verify if the effective stress intensity factor (SIF) range DeltaKeff DeltaKmax DeltaKop is indeed the fatigue crack driving force. The crack opening…
In this work the finite element method (FEM) was used to analyze the mechanical behavior of the composite materials subjected to the mechanical loading. This behavior is studied in terms of stress intensity factor variation as a function…
Since the last two centuries, concrete has become the number one building material in the world. Therefore, we are interested in studying the mechanical behavior at failure of this material and calculate its toughness. In this paper, we…
The initiation and propagation of fatigue cracks during cyclic torsion loading was studied in a cast Al alloy (A357) with a relatively large (~500 ?m) grain size. 2D observations, revealed that multi site crack initiation occur on the…
An experimental campaign was carried out on thin-walled tubes under tension and torsion. The results from experiments are measured and compared. It is observed that cracks follow a shear-dominated growth pattern with increasing crack…
In the past two decades, crack-tip mechanics has been increasingly studied with full-field techniques. Within these techniques, Digital Image Correlation (DIC) has been most widely used due to its many advantages, to extract important…
In this paper, a general weight function was developed to calculate the stress intensity factors (SIFs) for quarter-elliptical cracks in a wide range of lug attachment family. For this purpose, a series of finite element analyses were…
From experimental and theoretical investigations it is known that cracks are sensitive to geometry, e.g., to the inclination angle to the load. A small deviation of a crack from the normal direction to a tensile load causes mixed mode…
Ductile cast irons (DCIs) are characterized by a wide range of mechanical properties, mainly depending on microstructural factors, as matrix microstructure (characterized by phases volume fraction, grains size and grain distribution)…
This article deals with the locally multiaxial fatigue behaviour of high strength steel. To this end, the influence of the cracking path deflections (at the micro level) on the plasticity-induced fatigue crack growth is analyzed. With…
In the past several numerical studies have addressed the ductile mode of fracture propagation. However, the brittle mode of pipeline failure has not received as much attention yet. The main objective of this study is to predict brittle…
For various configurations examined in a series of fatigue experiments on thin-walled tubes under tension and torsion, the experimental results – crack path, crack growth life, near crack tip deformations, and crack closure – are measured…
An important topic of the Collaborative Research Centre TRR 30 of the Deutsche Forschungsgemeinschaft (DFG) is the crack growth behaviour in graded materials. In addition, the growth of cracks in the neighbourhood of regions and through…
Part-through surface or corner 2D cracks are commonly found in structural components, even because practically all fatigue cracks tend to start this way. It is a reasonable hypothesis to model them assuming the shape of their fronts is…
In this paper, the stress intensity factor (SIF) is computed in a circumferentially-cracked round bar (CCRB) subjected to tensile loading, considering that the resistant ligament is circular and exhibits certain eccentricity in relation to…
When the width of cracked nanocomponents made of brittle or quasi-brittle materials is less than approximately , the size of the - dominance zone becomes smaller than and comparable to the fracture process zone ( ). The fracture process…
In the present paper, the mechanical behaviour of edge-cracked nanobeams under Mixed-Mode loading is analytically investigated by means of the Stress-Driven nonlocal model. Firstly, the proposed formulation is outlined, and then applied to…
This study examines the fracture toughness of Al6061 alloy-based hybrid composites reinforced with silicon carbide particles and cenosphere microspheres. Aluminum alloy Al6061 is widely utilized in structural applications due to its…
The present contribution reviews a recently proposed method to rapidly estimate the averaged SED at the tip of short as well as long cracks under in-plane I+II and long cracks under out-of-plane I+III mixed mode loadings. Short cracks are…
Pipelines are considered as a major tool to transport hydrocarbons due to its important role in transporting fluids taking into account the operating conditions. Despite the importance of the elbow which considered as a critical part in…
Belgrade fair hall 1 is well known for its dome, which is still the world largest self-supported construction made of pre-stressed concrete, with its diameter of 106 m. In this paper the Finite Element Method (FEM) was performed to analyze…
The current work presents an experimental study on the use of the crack tip opening displacement (CTOD) to evaluate its ability to characterise fatigue crack growth. A methodology is developed to measure and to analyse the CTOD from…
