Tip: use quotes for an exact phrase, e.g. "teacher education"
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
The fatigue behaviour of circumferentially notched specimens made of titanium alloy, Ti-6Al-4V, has been analysed. To investigate the notch effect on the fatigue strength, pure bending, pure torsion and multiaxial bending-torsion fatigue…
Many numerical methods are carried out to study the nonlinear failure behaviors of the rock; however, the numerical simulation methods for the failed rock are still in the research stage. This paper establishes the damage constitutive…
In the present paper, the multiaxial fatigue life assessment of notched structural components is performed by employing a strain-based multiaxial fatigue criterion. Such a criterion, depending on the critical plane concept, is extended by…
Strain energy density is successfully used as criterion for failure assessment of brittle and quasi-brittle material behavior. This work investigates the possibility to use this method to predict the strength of V-notched specimens made of…
The aim of the paper is to estimate a value of the critical applied stress for a crack initiation from a sharp V-notch tip. The classical approach of the linear elastic fracture mechanics (LELM) was generalized, because the stress…
Welded joints have always been critical elements of industrial mechanical structures, often being the source of failures related to the presence of fatigue loads. Although the academic world has presented advanced methodologies for the…
The torsional fatigue behaviour of circumferentially notched specimens made of austenitic stainless steel, SUS316L, and carbon steel, SGV410, characterized by different notch root radii has been recently investigated by Tanaka. In that…
A three-dimensional crack propagation simulation is performed by the Dual Boundary Element Method (DBEM). The Stress Intensity Factors (SIFs) along the front of a semi elliptical crack, initiated from the external surface of a hollow axle…
The phenomenon of brittle fracture occurs too often in various branches of engineering being the reason of unexpected termination of anticipated service lives of an engineering objects. This leads to unfortunate catastrophic structural…
Epoxy resin reinforced with 10% of TiO2 and pure epoxy resin are taken to exemplify the possibility of constructing a fracture locus for engineering organic polymers as a dependence of ultimate strain energy density in cohesive failure on…
Brittle failure of components weakened by cracks or sharp and blunt V-notches is a topic of active and continuous research. It is attractive for all researchers who face the problem of fracture of materials under different loading…
This paper addresses the estimation of critical loads in FFF (Fused Filament Fabrication) printed polymers and composites containing notches. Particularly, the analysis is focused on the fracture load estimations of 39 PLA (polylactic…
A recent criterion based on the local strain energy density (SED) averaged over a given control volume is applied to well-documented experimental data taken from the literature, all related to steel welded joints of complex geometry. This…
In this paper are presented the crack initiation angles obtained in polyurethane (PUR) foams under mixed mode loading. Closed cell rigid PUR foams having three different densities 100, 145, and 300 kg/m3 were investigated. Experiments were…
Fatigue crack growth (FCG) rates have traditionally been formulated from fracture mechanics, whereas fatigue crack initiation has been empirically described using stress-life or strain-life methods. More recently, there has been efforts…
The existence of three-dimensional effects at cracks has been known for many years, but understanding has been limited, and for some situations still is. Understanding improved when the existence of corner point singularities and their…
In the Strain Energy Density (SED) approach for fatigue strength assessments of welded joints a well-defined control volume is considered. This volume surrounds the weld root or weld toe, both modelled like sharp (zero radius) V-notches…
The paper studies the adhesive strength of aluminum alloy specimens bonded with the use of an epoxy adhesive, under the tensile-shear stress state, depending on the testing temperature. Tension of modified Arcan specimens with load angles…
This study has used the strain energy density (SED) approach to evaluate the stress intensity factor (SIF) of cracked cruciform welded joints in Hardox 450 steel. A microstructural analysis was made of Hardox 450 steel which is composed of…
On the mode O existence in three-dimensional plates weakened by circular and elliptical holes under mode II loading It is known for long time that in a cracked plate subjected to anti-symmetric plane loading, the Poisson’s effect leads to…
The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X) is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five…
During the last years many researchers put so much effort to design layered structures combining different materials in order to improve low fracture toughness and mechanical reliability of the ceramics. It has been proven, that an…
In the present paper, the approach based on the strain energy density (SED) averaged over a structural volume is reformulated to estimate the lifetime of notched components subjected to variable amplitude (VA) uniaxial fatigue loading. The…
The purpose of this work is to validate the N-SIF, SED and ENS approaches for the fatigue design of austenitic stainless steel welded joints. Literature fatigue data for cruciform welded joints, originally expressed in terms of nominal…
The presented work introduces a numerical parametric study on the crack propagation direction under mixed-mode conditions (mode I + II). It is conducted for the geometry of an eccentric asymmetric fourpoint bending of a single edge notched…
The present paper investigates the multiaxial fatigue strength of sharp V-notched components made of titanium grade 5 alloy (Ti-6Al-4V). Axisymmetric notched specimens have been tested under combined tension and torsion fatigue loadings…
The main aim of the present work is to investigate the effects of different parameters on the fatigue strength of four different welded details through an energetic approach based on the Strain Energy Density failure criteria. The results…
The present contribution reviews a recently proposed method to rapidly estimate the averaged SED at the tip of short as well as long cracks under in-plane I+II and long cracks under out-of-plane I+III mixed mode loadings. Short cracks are…
The primary objective of this manuscript is studying the effect of T-stress term (T) on the crack propagation angle (CPA) and fracture toughness of in-plane mixed mode loading by utilizing a generalized form of minimum strain energy…
The paper considers a pro-bionic lattice shell (PBLS) for civil aviation structures and the problem of getting the parameters of a local low-velocity impact taking the value of residual strain by fiber optic sensors (FOS) installed in…
Additively manufactured materials possess significant heterogeneities and anisotropies of stiffness and strength properties between the growth and transverse directions. Residual stresses induced by the fabrication and processing stages…
The existence of three-dimensional effects at cracks has been known for many years, but understanding has been limited, and for some situations still is. Understanding improved when the existence of corner point singularities and their…
In the last decades the necessity of implant devices is continuously increasing. The researchers have thus focused their attentions on the development of new biocompatible materials, in particular polymers. Among them, polyetheretherketone…
The present paper addresses experimentally the high temperature fatigue of 40CrMoV13.9 steel and the effect of surface roughness on fatigue strength and crack initiation. The 40CrMoV13.9 steel is widely used in different engineering high…
In this paper, high cycle fatigue failure behavior of Load-carrying Cruciform Welded Joints (LCWJ) is assessed using Strain Energy Density (SED) approach. Different analytical solutions are proposed and applied to illustrate the effects of…
Two cracks, initiated from the opposite tips of a central notch inclined by 45°, were considered in cruciform specimens made of Ti6246. A static load was applied to a cruciform arm while a cyclic load was applied along the other arm.…
The objective of the present paper is to investigate the stress-controlled low-cycle fatigue behavior of piston aluminum-silicon (AlSi) alloy reinforced with nano-clay particles and T6 heat-treatment. The piston aluminum-silicon alloy…
