Tip: use quotes for an exact phrase, e.g. "teacher education"
Biodegradable stents are attracting the attention of many researchers in biomedical and materials research fields since they can absolve their specific function for the expected period of time and then gradually disappear. This feature…
This study aims to assess the delamination effect and predict the evolution of damage in 3D printed specimens to investigate the mechanical behavior occurring due to the delamination of the layers of 3D printed thermoplastic polymers.…
Polymers are known to be sensitive to aging; their lifetime can be predicted through experimental tests. The present paper presents an experimental study on the long-term performance of polymethyl methacrylate (PMMA) exposed to solar and…
While Additive Manufacturing (AM) of polymers has matured from rapid prototyping to functional production, the layer-wise fabrication process introduces significant mechanical anisotropy and microstructural heterogeneity, which complicates…
The present experimental study includes testing thirteen reinforced concrete beams with openings at different locations to investigate the efficiency of strengthening such openings. Different strengthening techniques around the opening…
Onyx ® is a new material composed of Polyamide 6 reinforced with short carbon fiber, used in the novel additive manufacturing composites technique. This paper aims to present the axial fatigue performance of this material with and without…
The stepped isostress method (SSM) is an advanced technique which allows the prediction of the long-term behavior and enables the construction of creep master curves of materials with short-term experimental tests. However, the performance…
This paper investigates numerically the behavior of Reinforced Concrete (RC) beams, strengthened using Carbon Fiber Reinforced Polymers (CFRP) sheets, subjected to impact loading. Three-dimensional finite element analysis was performed and…
This paper addresses the estimation of critical loads in FFF (Fused Filament Fabrication) printed polymers and composites containing notches. Particularly, the analysis is focused on the fracture load estimations of 39 PLA (polylactic…
Hexagonal boron nitride (hBN) and molybdenum disulfide (MoS2) fillers of 2 to 8 wt.% influence on toughness, microhardness and thermal stability of carbon fabric-reinforced epoxy composite (CFREC) reported. Mode-I, mixed-mode I/II…
The rapid development of inhomogeneous and anisotropic materials like carbon fiber reinforced polymers (CFRP) with epoxy matrices necessitates a multidisciplinary approach for safe use. This approach should integrate computational modeling…
In this study, Al2O3 microparticle was used as a filler for pineapple fiber reinforced composites with different matrix polymers. The effect of Al2O3 microparticles in the epoxy and unsaturated polyester matrix on the mechanical, physical…
More and more polymers and polymer composite materials are used in automotive industry to reduce cost and weight of vehicles to meet the environmental requirement. However, the fatigue behaviour for these materials is less understanding…
This work presents experimental and numerical research to evaluate the compression confinement techniques of HSC beams reinforced with different ratios of high-strength steel reinforcement. Twelve specimens of high-strength reinforced…
Manufacturing defects are inherent to any manufacturing process. However, in composite materials they might be unavoidable, e.g. ply waviness or even folds of plies are present in complex shaped parts during high pressure resin transfer…
Properties of asphalt mixture play a vital role in structural integrity and performance of flexible pavements structure. In flexible pavements asphalt concrete surface layer consists of asphalt binder, aggregates and in some cased…
The widespread use of carbon fibre-reinforced polymer (CFRP) composites in sectors such as aerospace and aviation calls for the adoption of sustainable recycling protocols. This research evaluates the mechanical and tomographic…
One environmental problem in most countries is the huge quantities of plastic waste, which has different types of polymers such as polyethylene terephthalate (PET), polypropylene (PP)., These plastics become a problem because of their…
The study focuses on examining the impact of internal manufacturing defects (voids and wrinkles) on the mechanical behavior of structural carbon fiber reinforced polymers (CFRP) under shear loading. Specimens of VKU/VSE1212 material with a…
In the last decades the necessity of implant devices is continuously increasing. The researchers have thus focused their attentions on the development of new biocompatible materials, in particular polymers. Among them, polyetheretherketone…
Additive manufacturing is extensively used for the production of complex-shaped parts from metals and polymers. Because of the influence of various physical factors, the structure of materials processed under different processing…
This paper analyses industrial PVC sheets structural integrity assessment widely used for different ranges of industrial applications. We investigated combined approaches focused on fracture toughness assessment to predict PVC mechanical…
The hydrophilic nature of bamboo fiber makes them prone to moisture uptake and subsequent property degradation. In this study, bamboo fiber–epoxy composites were hybridized with clamshell-derived particulate fillers to mitigate the adverse…
The deformation behaviour and fracture mechanisms of high-density polyethylene (HDPE), polypropylene (PP) and polyamide 6 (PA 6) are investigated experimentally under different stress states and at different crosshead speeds of 1, 20 and…
The use of fibre reinforced polymers (FRP) for increasing the strength of RC structures became a usual method. FRP presents easy application and demands low space and provide significant strength increase. Usually, the decision for FRP use…
In recent decades, one can observe a great increase in the replacement of traditional materials with polymer composites in high-strength and lightweight applications. High fuel consumption by automobile and aerospace vehicles built from…
This study investigates the modification of epoxy resins with pyrolysis bio-oils derived from plant waste, aiming to enhance mechanical performance. A method for epoxy resin modification using bio-oil is proposed, including techniques for…
Currently, cellular steel beams are widely used by structural engineers and major companies due to their useful structural applications and serviceable performance. However, these types of steel beams are susceptible to different states of…
The aim of this research was to study the effect of incorporating waste rubber aggregates on the physical, mechanical, thermal and durability performance of Self-Compacting Sand Concrete SCSC mixtures. For this purpose, the separately…
The contribution describes the fatigue lifetime predictions of polyethylene notched specimens based on the theory of critical distance. The approach uses the line method, which averages the axial stress over the critical distance. The…
Fiber-reinforced polymer (FRP) is the most promising technique in the present era to bring sustainability, reliability, and pseudo ductility to concrete structures due to its superior properties. Thermoplastic and thermoset polymers are…
The paper describes the results of an experimental study of a polyurethane material treated by ion implantation technology. The problems of crack growth in the near-surface layer carbonized by ion treatment were investigated using digital…
Concrete containing wastes from the demolition of old deteriorated buildings are produced enormously. Concrete is a brittle matrix that is usually reinforced by ductile reinforcement such as steel bars. However, due to the susceptibility…
Conductive PLA is an innovative composite material that combines the ecological benefits of polylactic acid, a biodegradable thermoplastic, with electrical conductivity properties. Usually used in additive manufacturing for its ease of…
Structural strengthening is vital to improve the load-carrying capacity partially or severely damaged Reinforced Concrete (RC) elements. Fiber Reinforced Polymers (FRPs) are widely used for strengthening purposes. In this study, use of…
There are a few kinds of research about box section Reinforced Concrete (RC) beams under the effect of combined shear and torsional stresses. In the present research, the concept of adding external strengthening, in the transverse…
An original simplified constitutive model is proposed to simulate the effects of ballistic impacts on blocks of synthetic muscle simulant based on mineral oil and styrene ethylene-butylene styrene polymers (SEBS) as a convenient substitute…
The article presents the results of computational and experimental studies of the strength and damageability of a connecting composite part in a metal-composite joint of isogrid and anisogrid structures made of polymer composite material…
The aim of this work was to evaluate the influence of temperature on the mechanical behavior of an amorphous polymer, namely acrylonitrile butadiene styrene (ABS), based on a series of uniaxial tensile tests on smooth specimens at…
Within this work, the causes of collapses and damages occurred in masonry artefacts have been evaluated to properly identify suitable monitoring and restoration methods. In this regard, a comprehensive literature review has been performed.…
Hybrid continuous fiber–reinforced composites produced by fused deposition modeling (FDM) offer a promising solution for lightweight load-bearing structures. However, their mechanical performance is strongly governed by internal…
Strain localization is one of key phenomena which have been studied extensively in geomaterials and for different kinds of materials including metals and polymers. This well-known phenomenon appears when structure/material is closed to…
A thorough study of the literature indicated that there is not much relevant research on the application of GFRP gratings. Otherwise, extensive study has been done on FRP bars, laminates, sheets, strips, and rods. This study proposes a…
The size and shape of individual grains, play an important role in the mechanical behavior of granular materials such as the strength and stability of railway ballast. The aim of this research is to study materials from which uniform…
Epoxy resin reinforced with 10% of TiO2 and pure epoxy resin are taken to exemplify the possibility of constructing a fracture locus for engineering organic polymers as a dependence of ultimate strain energy density in cohesive failure on…
This work focuses on the mechanical characterization of the inorganic matrix used for Fiber-Reinforced Cementitious Matrix (FRCM) composites, nowadays widely used to retrofit existing reinforced concrete and masonry structures. While…
New biomedical supportive and lightweight structures require the creation of sustainable polymer composites of high strength and wear resistance. This research explores the use of alkali-treated pineapple leaf fiber (PALF) reinforced epoxy…
In road construction, bitumen is the binder that gathered the different aggregates of road pavements. Bitumen, as a viscoelastic material, influences considerably the rheological behavior of bitumen concrete. The bitumen used in Algeria…
