Tip: use quotes for an exact phrase, e.g. "teacher education"
It is known that the initial waviness of the fiber affects the stiffness characteristics and strength of the polymer composite material. The article presents a continuum model taking into account the nonlinearity of the longitudinal…
The machinability of polymer matrix composites with fibers strongly depends on the type of fiber and dosage in question, having a high influence on the selection of tools and cutting parameters. The cutting temperature depends of rotation…
In this study, conventional bitumen test were performed on bituminous binder modified with Cocamide Diethanolamide chemical at different ratios. According to results of tests, the most suitable additive ratio has been determined as 5%.…
This paper experimentally investigates the effect of steel and glass fibers on the engineering properties of concrete. To achieve this, 0.3%, 0.6%, and 0.9% by volume fraction of steel and glass fibers are added in concrete mixtures with…
In the present work, the fracture resistance of a carbon fiber composite under mode I and mode II loading have been experimentally determined. For the mode I and II, the energy release rate G has been determinate for each material. In some…
Understanding the failure modes of damaged or cracked structures and repaired by bonding a composite patch is an essential point to improve its resistance to failure and subsequently extend its service life. In the present study, a 3D…
An experimental study was conducted to investigate the influence of operational defects, such as surface scratches and dents, on the residual mechanical properties of glass fiber-reinforced plastic (GFRP) during quasi-static tensile and…
This paper investigates numerically the behavior of Reinforced Concrete (RC) beams, strengthened using Carbon Fiber Reinforced Polymers (CFRP) sheets, subjected to impact loading. Three-dimensional finite element analysis was performed and…
The valorization of local by-products in the manufacture of a new range of sand concrete and the improvement of their properties, will lead to seek an arrangement between performance and cost in order to achieve a resistant material. Waste…
This paper aims to analyze the multi-effects of the glass fiber reinforced polymer (GFRP) composite patch to repair the inclined cracked 2420-T3 aluminum plate. Three-dimensional finite element method (FEM) was used to study the effect of…
This paper explores the effect of internal technological defects on the fatigue life of carbon fiber reinforced plastic (CFRP) under simple loading waveforms. One conducted experiments on CFRP specimens with embedded artificial defects…
The technology of energy piles for heat storage involves turning the concrete piles buried beneath the ground into a part of the ground-source heat pump system and burying the heat-transfer tubes in the foundation piles, which are regarded…
The present investigation deals with the characterization of tensile behavior of various Fiber Reinforced Polymer composites under Thermo-Mechanical loading. Five different types of Uni-Directional (UD) composites of Carbon, Glass…
This research examines the performance of reinforced lightweight concrete beams subjected to several degrees of damage (50%, 60%, 70%, and 100%). It can use a sheet made of Carbon Fiber Reinforced Polymer (CFRP) to reinforce. The Full…
In this study, the relationships between processing, structure and properties of self-reinforced ultra-high molecular weight polyethylene (UHMWPE) composites fabricated via thermal pressing are investigated. By systematically varying…
In this study, ultrasonic welding (USW) of lap joints of polyetherimide (PEI) plates (adherends) with carbon fiber (CF) prepregs impregnated with PEI was investigated. No energy director (ED) was used, so binder contents were varied in the…
The study focuses on examining the impact of internal manufacturing defects (voids and wrinkles) on the mechanical behavior of structural carbon fiber reinforced polymers (CFRP) under shear loading. Specimens of VKU/VSE1212 material with a…
Modern technological capabilities make it possible to produce 3D spatially-reinforced for polymer composite materials. The tasks of experimental research and analysis of the deformation process of new composite materials for aviation…
With the development of the building industry, various novel building materials have emerged. Modern buildings requires higher on performance of building materials, and the performance of old buildings has not been able to keep up the pace…
In recent years, the use of natural fiber composites to provide a possible replacement for synthetic fiber composites for practical applications has been the subject of several studies. This study deals with the fabrication and…
Glass Fiber Reinforced Polymer (GFRP) I-sections offer a promising alternative to traditional steel reinforcement due to their reduced weight and maintenance requirements. This study aims to optimize the design of GFRP-reinforced composite…
The hydrophilic nature of bamboo fiber makes them prone to moisture uptake and subsequent property degradation. In this study, bamboo fiber–epoxy composites were hybridized with clamshell-derived particulate fillers to mitigate the adverse…
Fiber Reinforced Plastic (FRP) can be used for strengthening concrete or masonry constructions. One of the main problem in the use of FRP is the possible detachment of the reinforcement from the support material. This paper deals with the…
There are a few kinds of research about box section Reinforced Concrete (RC) beams under the effect of combined shear and torsional stresses. In the present research, the concept of adding external strengthening, in the transverse…
In the present work, the fracture toughness (KIC) of full-depth (FD) fiber-reinforced concrete (FRC) and layered functionally graded concrete (FGC) matrix cracked (MC) beams has been determined by the equivalent relationships of the…
The present paper proposes a strength model for unidirectional composites with Lin/Epoxy. The model assumes that, a central core of broken fibers flanked by unbroken fibers which are subject to stress concentrations from the broken fibers.…
The high ductility of Fiber Reinforced Self-consolidating concrete (called Sismabeton) can be developed not only in tension but also in compression. This aspect is evidenced in the present paper by measuring the mechanical response of…
In this work, samples from composite materials with embedded optical fibers are investigated. It is known that for unidirectional layered composite materials, under certain conditions, a distortion of the internal structure and the…
In this research, the finite element method is used to develop a numerical model to analyse the effect of the external strengthening of reinforced concrete beams by using carbon Fiber Reinforced Polymer (CFRP) sheets. A finite element…
The flexural behavior of lightweight concrete two-way slabs is investigated in this work, with a focus on the strengthening or repairing method of externally attaching carbon fiber-reinforced polymer (CFRP) sheets. Five 1000 mm by 1000 mm…
Carbon fiber reinforced plastic (CFRP) materials used for lightweight aircraft structures are susceptible to low velocity accidental impacts during manufacture and while in service. In this study the CFRP laminates subjected to low…
Adopting novel sandwich structures with FRP (Fibre Reinforced Polymer) skins and a metallic lattice core, both of which have high specific strength and stiffness, is one way to achieve better mechanical performance while remaining…
This paper investigates the possibility of combining steel fibers with different weight percentages along with their functions in increasing compressive strength, indirect tensile strength and bending strength. In this study, two types of…
This paper is oriented to the experimental research of the mechanics of the CFRP sandwich plates, glass and carbon fiber sample panels with a large-cell honeycomb core. The method for testing polymer composite sample plates in compression…
A three-dimensional (3D) general upper-bound limit analysis procedure for the determination of the collapse load of out-of-plane loaded masonry walls with Fiber Reinforced Polymer (FRP) reinforcement strips is presented. The geometry of a…
Onyx ® is a new material composed of Polyamide 6 reinforced with short carbon fiber, used in the novel additive manufacturing composites technique. This paper aims to present the axial fatigue performance of this material with and without…
Impact resistance and energy absorbing capability are of great interest in the design of composite sandwich structures. This paper experimentally studies damage, failure and energy absorption properties of foam core sandwich panels with…
The widespread use of carbon fibre-reinforced polymer (CFRP) composites in sectors such as aerospace and aviation calls for the adoption of sustainable recycling protocols. This research evaluates the mechanical and tomographic…
Currently, cellular steel beams are widely used by structural engineers and major companies due to their useful structural applications and serviceable performance. However, these types of steel beams are susceptible to different states of…
The objective of this work was to characterize the full-field flexural behavior of composite sandwich beams. Finite element analysis was used to estimate the behavior of sandwich beams under three- and four-point-bending tests and were…
The present study present the influence of SiCp incorporation on three-body abrasive wear behavior of glass/epoxy composites. The investigations was carried out using dry sand rubber wheel abrasive wear test apparatus. 2k factorial design…
The volume fraction effect of carbon fiber in an epoxy matrix in the vicinity of the notch on the traction and torsion behavior were studied. This volume fraction which increases with the reduction of the thickness is a parameter which…
This paper describes the application of SMA (Shape Memory Alloy) materials to enhance the passive damping of GFRP (Glass Fiber Reinforced Plastic) laminated composite. The SMA has been embedded as reinforcement in the GFRP laminated…
In order to study the effect of polypropylene fibers on the durability of cementitious composites, several experimental tests have been carried out in the laboratory. The composite was tested with different volume fractions of…
Composite systems are widely used in many engineering applications for new structures and strengthening of existing ones. Within the structural rehabilitation of civil constructions, the plating technique of beams with Fiber Reinforced…
The paper studies the processes of deformation and fracture in nanocomposites. The study was curry out by the method of mathematical modeling. The behavior of the nanosystem was described by the molecular dynamics apparatus. A modified…
Glass Fiber Reinforced Polymer (GFRP) is a promising alternative to steel due to its high strength, lightweight properties, corrosion resistance, and low maintenance requirements. This study examines the effect of internal GFRP I-sections…
The use of carbon-fiber composite materials (CFRP) in critical cases implies an increase in the resistance to the stability of their mechanical properties. For the purpose of in-depth analysis of defects in the experiments, an integrated…
The good management of drinking water begins with a supply network, with a low rate of leakage. Currently, the pipes used in the water transport system are mainly made of polymeric materials, such as HDPE. The corrosion degradation of this…
The near surface mounted (NSM) method of inserting fiber reinforced polymer (FRP) elements (rods or lamina) into notches has been shown to be a good way for restoring reinforced concrete (RC) elements. The knowledge about the use of…
