Abstract
In order to study the effect of polypropylene fibers on the durability of cementitious composites, several experimental tests have been carried out in the laboratory. The composite was tested with different volume fractions of polypropylene fibers (0.05%, 0.10%, 0.30% and 0.50%). All the results relating to the indicators (porosity accessible to water εb, to the oxygen permeability Kapp.gas and diffusivity Dns) indicate that the addition of polypropylene fibers in a cement matrix represents only a small effect on durability. This panel of general sustainability indicators can be supplemented by indicators more specific to each degradation process identified or envisaged depending on the environmental conditions of the structure. However, the addition of the volume fraction of polypropylene fibers (0.50%) in a cementitious composite, increases fire resistance. Such behavior gives fiber composites interesting properties which favor their use in structures exposed to fire risks.
Keywords
Article history
- ReceivedUntil the next stage: 19 days
- Revision requestedUntil the next stage: 13 days
- RevisedUntil the next stage: 23 days
- AcceptedUntil the next stage: 22 days
- Published
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
May be shared and adapted, provided appropriate credit is given. Copyright © 2021 Hassan Suiffi, Anas El Maliki, Fatima Majid, Omar Cherkaoui.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- Fatima Majid, T. Hachimi, H. Rhanim, R. Rhanim, Delamination effect on the mechanical behavior of 3D printed polymers , Fracture and Structural Integrity: Vol 17 No 63 (2023): January 2023
- Najat Zekriti, Fatima Majid, Hachimi Taoufik, Yassine Tounsi, Rajaa Rhanim, Ibrahim Mrani, Hassan Rhanim, Improvement of crack tip position estimation in DIC images by image processing methods , Fracture and Structural Integrity: Vol 17 No 63 (2023): January 2023
- Abderazzak Ouardi, Fatima Majid, Nadia Mouhib, Mohamed Elghorba, Residual life prediction of defected Polypropylene Random copolymer pipes (PPR) , Fracture and Structural Integrity: Vol 12 No 43 (2018): January 2018
- Fatima Majid, Jilali Nattaj, Mohamed Elghorba, Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue , Fracture and Structural Integrity: Vol 10 No 38 (2016): October 2016
- Fatima Majid, Mohamed Elghorba, Continuum damage modeling through theoretical and experimental pressure limit formulas , Fracture and Structural Integrity: Vol 12 No 43 (2018): January 2018
- Najat Zekriti, Fatima Majid, Rajae Rhanim, Ibrahim Mrani, Hassan Rhanim, PVC failure modelling through experimental and digital image correlation measurements , Fracture and Structural Integrity: Vol 16 No 60 (2022): April 2022
- Nassima Naboulsi, Fatima Majid, Taoufik Hachimi, Najoua Barhoumi, Kaouthar Khlifi, Soufyan Dadoun, Predicting the strength of 3D-printed conductive composite under tensile load: A probabilistic modeling and experimental study , Fracture and Structural Integrity: Vol 19 No 72 (2025): April 2025
- Taoufik Hachimi, Fouad Ait Hmazi, Fatima Majid, Damage of additively manufactured polymer materials: experimental and probabilistic analysis , Fracture and Structural Integrity: Vol 19 No 73 (2025): July 2025
- Taoufik Hachimi, Fouad Ait Hmazi, Fatima Ezzahra Arhouni, Hajar Rejdali, Yahya Riyad, Fatima Majid, Experimental calibration of a virtual raster section for high-accuracy FDM simulation in Abaqus , Fracture and Structural Integrity: Vol 20 No 76 (2026): April 2026