Tip: use quotes for an exact phrase, e.g. "teacher education"
Various failure modes induce localized internal damage and stress concentration sites in power plant components, causing additional plasticity that degrades material strength. Effect on such localized plasticity on components durability…
Cold expansion by hardening is a common process used in the aerospace industry to extend the fatigue lifetime of assembly holes, through a field of high compressive tangential residual stresses. The understanding and the control of the…
Most of the prior studies on the prediction of fatigue lives have been limited to uniaxial loading cases, whereas real world loading scenarios are often multiaxial, and the prediction of fatigue life based upon uniaxial fatigue properties…
The current work presents an experimental study on the use of the crack tip opening displacement (CTOD) to evaluate its ability to characterise fatigue crack growth. A methodology is developed to measure and to analyse the CTOD from…
The dynamic mechanical property of concrete is very complex and is one of the hot spots in academic research. In this paper, concrete is considered as a three-phase composite composed of cement mortar matrix, coarse aggregate and…
This work is motivated by the increasing interest towards the application of the “Projection-by-Projection” (PbP) spectral method in finite element (FE) analysis of components under multiaxial random loadings. To help users and engineers…
Axial alternating fatigue tests with superimposed static torsional mean stress and shear alternating fatigue tests with superimposed static tensile mean stress are represented. A decrease in the fatigue life of the material was observed…
The paper studies the adhesive strength of aluminum alloy specimens bonded with the use of an epoxy adhesive, under the tensile-shear stress state, depending on the testing temperature. Tension of modified Arcan specimens with load angles…
This work aims at studying the creep behaviour of 15-15Ti(Si) austenitic steel, under uniaxial stress (range of 300-560 MPa), and its interaction with liquid lead. The steel was tested to verify its sensitivity to Liquid Metal…
The hydrogen effect on the fracture toughness and fatigue crack growth behaviour in the martensitic high strength steel is investigated. The secondary ion mass spectrometry method has been employed to analyse the distribution of hydrogen…
A large number of mechanical components are subjected to fatigue loading beyond 106 cycles. The VHCF behaviour of smooth specimens has been extensively investigated in the recent years, even if more efforts are necessary to reveal the…
Ultrasonic fatigue tests were carried out on stainless steel AISI 316 and 304, under two modalities: at room temperature and in immersion (water for 316 and antifreeze for 304 steels); all tests were carried out with a loading ratio R=-1.…
Pipelines are considered as a major tool to transport hydrocarbons due to its important role in transporting fluids taking into account the operating conditions. Despite the importance of the elbow which considered as a critical part in…
This article presents the bending fatigue behavior and the scatter-band analysis of aluminum alloys under beneficial conditions of nano-clay-particles and heat-treating, compared to detrimental conditions of the mechanical stress and the…
Considering the fragility of ultra-thin foil material, the machining methods might bring in undesired and non-neglectable damage, which would affect the uniaxial tensile properties of such material. This presented work systematically…
The main aim of the research work is to examine the fracture toughness of the dual phase steels prepared using the intermediate quenching method. The ferrite-martensite dual phase (DP) steel is produced using low carbon micro alloyed steel…
The realization of a connection between a ceramic and a metal is always accompanied by the creation of a multi-axial stress field. Different physical and mechanical origins explain the genesis of stresses at the bonding interface in the…
Paper presents the “in situ” method for determining of irreversible fatigue damage accumulation, based on the analysis of nonlinear manifestations of the feedback signal in a closed system of an ultrasonic fatigue system. During very high…
To date, several applications of magnetorheological (MR) fluids are present in the industrial world, nonetheless system requirements often needs better material properties. In technical literature a previous work shows that MR fluids…
This study aims to investigate the delamination effect of a metal sandwich panel using a four-point bending simulation under continual spectrum loading. The most recent core designs of the sandwich panel have a cavity that can increase…
Radiation effects lead to significant reduction in ductility during the life of the components used in nuclear reactors. Sharp change in fracture toughness at lower temperature in Body Centered Cubic (BCC) materials as compared to Face…
The work is devoted to experimental study of heat flow evolution at the fatigue crack tip during biaxial loading. The plane samples of titanium alloy Graid-2 with thick of 1 mm were weakened by notch to initiate fatigue crack at the center…
In the last four decades, bonded composite repair has proven to be an effective method for addressing crack damage propagation. On the other hand, machine learning (ML) has made it possible to employ a variety of approaches for mechanical…
The influence of temperature on the fatigue properties of pseudoelastic NiTi under low-cycle fatigue are investigated. Tests were performed under the uniaxial tensile deformation (pull-pull) at 0°С and 20°С which is above the austenite…
The paper deals with the investigation of the temporal instabilities and spatial localization due to the Lüders behavior and the Portevin–Le Chatelier effect in the carbon steel C1010 and the aluminummagnesium alloy AA5052, which manifest…
The Compact Tension Shear (CTS) specimen is used to study fracture and fatigue under mixed mode I/II loading conditions. Existing K solution was developed for fracture studies and it does not consider the effect of crack deflection. The…
In structural engineering, composite patch repairs are widely used to address cracked structures. However, their behavior under thermo-mechanical loading remains complex and less understood. This study examines the repair of a…
To describe the effect of crack-tip constraint on the stress field for finite cracked bodies, the following most widely used constraint parameters can be employed in elastic-plastic fracture mechanics, namely, local triaxiality parameter…
The primary objective of this manuscript is studying the effect of T-stress term (T) on the crack propagation angle (CPA) and fracture toughness of in-plane mixed mode loading by utilizing a generalized form of minimum strain energy…
In this work the finite element method (FEM) was used to analyze the mechanical behavior of the composite materials subjected to the mechanical loading. This behavior is studied in terms of stress intensity factor variation as a function…
This article defines the main actions planned in the procedure of non-destructive testing and analysis of defects in the BK1 industrial mill of the cement plant of the GICA group. One of the subjects attracting the attention of researchers…
The purpose of this study is to analyze the behavior of a crack with and without reinforcement by a composite patch of an aluminum plate in mode I using the finite element method. The repair patch is boron / epoxy and Carbon / epoxy, which…
The present paper investigates the multiaxial fatigue strength of sharp V-notched components made of titanium grade 5 alloy (Ti-6Al-4V). Axisymmetric notched specimens have been tested under combined tension and torsion fatigue loadings…
FML (Fibre Metal Laminate) is a hybrid material that presents outstanding structural properties, such as resistance to cyclic and dynamic loads, together with low specific weight. This material consists of metal sheets alternating to…
The present study investigates the influence of corrosion exposure on the fatigue behavior of S460NL high-strength structural steel, a material that is frequently utilized in offshore and civil engineering structures. Accelerated corrosion…
The article is devoted to the experimental study of the laws of inelastic deformation of structural polymer composites in the presence of macroinhomogeneous fields. The work uses a three-dimensional optical system and a method of digital…
