Tip: use quotes for an exact phrase, e.g. "teacher education"
The current work aims at estimating the stress intensity factor deep inside the bulk from elastic strain data measured by synchrotron X-ray diffraction. Key features affecting the evaluation of the stress intensity factor are the number of…
In the present work, the fracture performance of pre-cracked reinforced concrete beams was investigated numerically and experimentally. Experimental and numerical programs were designed to examine the effect of beam width, b, (120 and 250…
Two experimental techniques are used study the response of cement mortar beams subjected to three-point bending under various loading protocols. The techniques used are the detection of weak electric current emissions known as Pressure…
The use of bonded externally polymer reinforced fiber (FRP) Laminates has been introduced as an effective approach in rehabilitating (RC) structures due to their high strength, corrosion resistance, reduced weight, and ease of use. This…
The fracture mechanical properties of silicate based materials are determined from various fracture mechanicals tests, e.g. three- or four- point bending test, wedge splitting test, modified compact tension test etc. For evaluation of the…
The aim of this work is to solve the methodological issues of the experimental study of the nucleation and propagation of deformation bands due to the Portevin-Le Chatelier effect under conditions of complex loading. It is of interest to…
The paper focuses on the experimental and theoretical study of plastic deformation instability and localization in materials subjected to dynamic loading and high-velocity perforation. We investigate the behavior of samples dynamically…
This work is devoted to the development of an experimental method for studying the energy balance during cyclic deformation and fracture. The studies were conducted on 304 stainless steel AISE and titanium alloy OT4-0 samples. The…
Natural stones like marbles are often employed as façade panels to externally cover buildings. These natural materials tend to exhibit a quasi-brittle nonlinear fracture behaviour which, conversely to concrete counterpart, has much less…
The fatigue life prediction model of self-piecing riveting components of aluminum alloy is established and the effects of roughness and residual stress on fatigue life of self-piercing riveting components is analyzed by the model. Finite…
A new technique of Layered Hollow Core Slab (LHCS) has been used to obtain a slab with an optimum weight-to-strength ratio. Specimens with a 90 mm top layer of High Strength Concrete (HSC) and a 90 mm bottom layer of Lightweight Aggregate…
The main objective of the work is to study the fracture behavior of AA6061-graphite material using both experimental technique and finite element simulation by considering helicopter rotor blade as a case study. From the case study, it has…
The aim of this work was to evaluate the influence of temperature on the mechanical behavior of an amorphous polymer, namely acrylonitrile butadiene styrene (ABS), based on a series of uniaxial tensile tests on smooth specimens at…
This paper is concerned with investigating of the plastic behaviour on gap K-joints of truss girders, made from thin-walled rectangular hollow section members. An experimental study was carried out on a full-scale girder under a…
The aim of this work is the analysis of the contact area in a knee prosthesis using two different approaches. In particular, the interface between the femoral component and the polyethylene insert has been studied both numerically and…
This study reports an experimental investigation on the applicability of the net cross-sectional resistance rules of Eurocode 3 for steel plates with different bolt-hole configurations and steel grades, when relatively small fatigue cracks…
This work focuses on the mechanical characterization of the inorganic matrix used for Fiber-Reinforced Cementitious Matrix (FRCM) composites, nowadays widely used to retrofit existing reinforced concrete and masonry structures. While…
This work is dedicated to the numerical study of the influence of the parameters of statistical distribution of the structural elements’ ultimate strength on fracture processes of deformable bodies with stress concentrators. The loading…
The objective of the study is to introduce an experimental uncertainty budget process for concrete compressive strength test, based on a protocol that incorporates effects of multiple factors significant for the measurement result.…
Crack formation in hemispherical domes is a distinguished problem in structural mechanics. The safety of cracked domes has a long track record; the evolution of the cracking pattern received less attention. Here, we report…
This study aims to evaluate the effect of various parameters on the behavior of the reinforced concrete flat slabs and the contribution of each design element in the punching shear strength. This research presents experimental results of…
The paper deals with the investigation of the temporal instabilities and spatial localization due to the Lüders behavior and the Portevin–Le Chatelier effect in the carbon steel C1010 and the aluminummagnesium alloy AA5052, which manifest…
The present study is concerned with formulation of a model for the creep–fatigue crack growth rate prediction on the base of fracture damage zone concepts. It is supposed that crack growth rate can be determined by integration of damage…
The work is devoted to experimental study of heat flow evolution at the fatigue crack tip during biaxial loading. The plane samples of titanium alloy Graid-2 with thick of 1 mm were weakened by notch to initiate fatigue crack at the center…
The use of carbon-fiber composite materials (CFRP) in critical cases implies an increase in the resistance to the stability of their mechanical properties. For the purpose of in-depth analysis of defects in the experiments, an integrated…
An experimental study with many variables was carried out to investigate the effective width of simply supported composite beams (T&L sec. beams) with & without slab opening. Three full-scale composite slab models with six different…
The experimental study presented in this research was conducted to understand the performance of rubberized concrete columns under axial loads and numerically analyze the conduct of rubberized reinforced concrete (RRC) columns under cyclic…
Conductive PLA is an innovative composite material that combines the ecological benefits of polylactic acid, a biodegradable thermoplastic, with electrical conductivity properties. Usually used in additive manufacturing for its ease of…
Timber-concrete composite beams, known as TCC beams, have been widely used in rehabilitation or in new buildings where several types of connections are commonly inserted to ensure partial composite action between the timber joist and the…
The use of reinforcements in adhesive joints makes the stress distribution more uniform, improving their mechanical performance and adhesion. The present paper aims to verify the effectiveness and efficiency of the insertion of nylon 6…
The paper investigates the use of 3D-printed components made from Polylactic Acid (PLA) for the restoration of architectural and ornamental elements, focusing on architectural/structural components. The material PLA was chosen for its…
In this study, the main objective was the creation of a code, which gives the capability to a Finite Element Analysis Program with no built-in crack study tools, to study the propagation of a crack, in a cracked surface. For this purpose…
From experimental and theoretical investigations it is known that cracks are sensitive to geometry, e.g., to the inclination angle to the load. A small deviation of a crack from the normal direction to a tensile load causes mixed mode…
Concrete developed from light expanded clay aggregate (LECA) and glass fiber has good performance, durability, and sustainability. Towards this, the experimental investigation was designed to study cubes, cylinders, and simply supported…
To study glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using asymmetric Four Point Bend specimen. Fracture toughness values for different fiber-oriented glass/epoxy laminates under…
Nowadays most industrial realities undergo a strong push to improve cost-effectiveness, productivity and quality of manufactured products. In particular we focussed our attention in the area of design of plastic structural components…
The aim of this study is to investigate whether exercise can reverse some of the adverse effects of high-fat-diet-induced obesity on lipid metabolism and bone biomechanical properties. A total of 26 adult male C57bl/6J mice were randomly…
An analysis focused on capturing the phenomenon of quasibrittle fracture is presented. Selected parameters relevant for quasi-brittle fracture are evaluated and an assessment of their dependence on the size and shape of the test specimen…
Glass Fiber Reinforced Polymer (GFRP) I-sections offer a promising alternative to traditional steel reinforcement due to their reduced weight and maintenance requirements. This study aims to optimize the design of GFRP-reinforced composite…
Though the principle of orthogonal experimental design, the uniaxial compression experiment and uniaxial tensile experiment were carried out on nine groups of high toughness cementitious composites with different mixing ratios to study the…
A straightforward methodology for modelling the cohesive zone (CZM) of an adhesively bonded joint is developed, by using a commercial finite element code and experimental outcomes from standard fracture tests, without defining a damage law…
The technology of energy piles for heat storage involves turning the concrete piles buried beneath the ground into a part of the ground-source heat pump system and burying the heat-transfer tubes in the foundation piles, which are regarded…
In this study, a generalized Barenblatt and Botvina dimensional analysis approach to fatigue crack growth is proposed in order to highlight and explain the deviations from the classical power-law equations used to characterize the fatigue…
The purpose of this study was to explore the changes of mechanical and physical properties of granite under different thermal loading effects. Uniaxial compression experiments studying the rules of the influence of temperature load on…
Isotactic polybutene-1 (i-PB1) is a polymer used for the manufacturing of pressurized pipes. In this work two grades of i-PB1 with a different degree of isotacticity have been investigated; they have been supplied by Basell Polyolefins.…
Despite the extensive studies on the effect of width-thickness ratio and residual stress on member behavior, few scholars have probed into the residual stress distribution on the I-section members. Based on the principle of blind hole…
This study presents the first investigation into the use of glass fiber reinforced polymer GFRP to strengthen steel beams with web openings. Based on previous research about the strengthening of steel beams with web perforation using…
Results of a double-shear single-dowel wood connection tested under monotonic quasi-static compression loading are presented and discussed in this paper. The wood used in this study was a pine wood, namely the Pinus pinaster species, which…
The determination of residual stresses by combining blind hole drilling and optical interferometric measurement of relief deformation is re-visited to evaluate its applicability to aerospace structures. The experimental methodology…
The paper provides an evaluation of the nonlinear dynamic response of a cantilever beam made of composite material subjected to low-velocity impacts. The structure is assumed to respond in a quasi-static manner and modelled by a continuous…
