Tip: use quotes for an exact phrase, e.g. "teacher education"
This paper deals with the two-way shape memory effect (TWSME) induced on a strip of a nearequiatomic NiTi alloy by means of the shape memory cycling training method. This procedure is based on the deformation in martensite state to reach…
NiTi shape memory alloys (SMAs) are increasingly used in many engineering and medical applications, because they combine special functional properties, such as shape memory effect and pseudoelasticity, with good mechanical strength and…
Shape memory effect (SME) and the relation with corrosion behavior of Cu-Zn-Al Smart Memory Alloys (SMAs) were investigated using different techniques: Scanning Electron Microscopy equipped with an Energy Dispersive System, X-Ray…
The presence of a geometric discontinuity such as a crack or a notch can cause the failure of a structure during its use. Under various mechanical or thermal stresses, a high concentration of stresses can take place at the level of these…
While a long stable crack propagation phase was observed during experiments of complex welded components, very conservative assessments of the fatigue life were achieved in the past. The difference was explained by the stress gradient…
This paper analyses the influence that the type of geometry used to obtain the stress/strain fields in a cylindrical contact has on fretting fatigue life predictions. In addition, this work considers the effect that the fatigue crack shape…
Crack propagation in gears is a problem related not only to the life of the components, but also to the concept of failsafe design. Fail safe design means to design a component in order that, if a failure occurs, this may cause a “safe…
In this work the finite element method was used to analyse the composite patch shape effect of the repair performance. Unlike all the works done conducted so far in this domain, this work proposed here, takes into account the reducing…
Laser shock peening (LSP) is used to enhance surface quality of the metallic structures by the generation of compressive residual stresses on it. This work studies the effect of the main LSP parameters on residual stress fields by the…
This paper discusses Shape Memory Alloys’ (SMA) elastocaloric effect (EC) and underscores its potential use in substituting conventional cooling systems, for future and innovative applications in the biomedical sector, where temperature…
The size and shape of individual grains, play an important role in the mechanical behavior of granular materials such as the strength and stability of railway ballast. The aim of this research is to study materials from which uniform…
The variation of crack shape factor (a/c) during propagation has an important role on calculation of the stress intensity factor (SIF), where imprecise estimation of this latter can lead us to an inaccurate prediction of failure…
This paper investigated the static and dynamic behaviors of isotropic cracked simply supported beam using finite element analysis (FEA), ANSYS software. Modal and harmonic vibration analysis of intact and damaged beam were performed in…
Through this study, a numerical simulation based on 3D in order to investigate the effect of Crack-front shape on the stress intensity factor and fatigue crack growth behavior of center cracked aluminum plate repaired asymmetrically with a…
Additive manufacturing (AM) could be used to reduce the production times of prototypes; however, further research is required to address metals structural parts. To obtain the correct properties, some relevant factors to be considered are…
The present paper aims to discuss a frequency-domain multiaxial fatigue criterion based on the critical plane approach, suitable for fatigue life estimations in the presence of proportional and non-proportional random loading. The…
This paper discusses the effect of different surface treatments on shape memory alloy wires embedded in PolyEster (PE) and VinylEster (VE) polymeric matrices. In particular, two types of chemical etching and a chemical bonding with a…
Gigacycle fatigue properties of materials are strongly affected by the specimen risk volume (volume of material subjected to a stress amplitude larger than the 90% of the maximum stress). Gigacycle fatigue tests, performed with ultrasonic…
The effect of load intensity and porous material structure on the fragmentation statistics of ZrO2(MgO)-based ceramics is studied. Cylindrical samples were fragmented under dynamic compression. Experimental data processing showed that the…
Concrete Filled Double Skinned Steel Tubular (CFDST) composite column is preferred over Concrete Filled Steel Tube composite column (CFST) owing to enhanced strength. However, they may possess concrete imperfection due to shrinkage and…
For more than two decades, the construction technique using concrete filled steel tube (CFST) has been widespread throughout the world. Indeed, it has been demonstrated that the use of normal or high strength concrete, confined in a steel…
In this study, the finite element method is used to analyze the effect of corrosion and the behavior of inclined cracks of an aluminum plate Al 2024 -T3 under thermomechanical loading. The effects of the inclination of the crack and the…
In recent decades, researchers have tried to use waste materials as a partial or complete replacement of the gravel ingredients of concrete to reduce environmental impact. One of these materials is electronic waste. The problem of this…
The detachment plates 2024T3 by an Araldite adhesive is studied in this work by using the finite element method to predict the damage in traction and compression behavior under the effect of geometrical parameters such as the lap length…
In recent times, the shape of the beams evolved from wooden sleepers and then to steel sleepers until they reached concrete sleepers. These sleepers play a very important role in transferring the loads from the train wheels to the subgrade…
Nanostructured adhesives may be defined as those materials whose elements imbedded in an epoxy matrix have dimensions in the 1 to 100 nm range. One of the most interesting aspects of ceramic nanoparticles is that their mechanical…
This study reports an experimental investigation on the applicability of the net cross-sectional resistance rules of Eurocode 3 for steel plates with different bolt-hole configurations and steel grades, when relatively small fatigue cracks…
This paper is devoted to the numerical and experimental study of ductile fracture in bulk metal forming of the 2017A-T4 aluminum alloy. From an experimental standpoint, the ductile fracture of the 2017A-T4 aluminum alloy is investigated…
The influence of temperature on the fatigue properties of pseudoelastic NiTi under low-cycle fatigue are investigated. Tests were performed under the uniaxial tensile deformation (pull-pull) at 0°С and 20°С which is above the austenite…
This paper reports a brief review of the research activities on fracture mechanics of nickel-titanium based shape memory alloys carried out at University of Calabria. In fact, this class of metallic alloys show an unusual fracture response…
An experimental investigation of the mechanical and fracture characteristics of Portland limestone and Corsehill sandstone is undertaken, aiming at enhancing understanding of the structural behaviour of these natural building stones…
This paper concerns the results of research into the influence of the composition of rock inclusions on the fracture response of cement-based composite specimens. Specially designed specimens of the nominal dimensions 40 × 40 × 160 mm with…
Single Point Incremental Forming was conducted on Aluminum1100 and Brass CuZn37 to form a hyperbolic truncated pyramid with varying wall angles until the fracture occurs. The formability of the specimens in terms of fracture depth and…
The use of carbon-fiber composite materials (CFRP) in critical cases implies an increase in the resistance to the stability of their mechanical properties. For the purpose of in-depth analysis of defects in the experiments, an integrated…
This work deals with investigations of the stress field distribution around a steel anchor embedded in a concrete. Tensile loading - pulling force of the steel anchor is considered, which is very often connected to concrete cone failure.…
A three-dimensional (3D) general upper-bound limit analysis procedure for the determination of the collapse load of out-of-plane loaded masonry walls with Fiber Reinforced Polymer (FRP) reinforcement strips is presented. The geometry of a…
