Fracture and Structural Integrity e-ISSN 1971-8993 Open access
Analytical, Numerical and Physical Models Vol. 13, No. 50 (2019)

Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint

Author and affiliation details
  • Badr Benamar Corresponding author Faculty of Technology, University Djillali Liabes, Sidi bel Abbes, Algeria. a_badroo@yahoo.fr
  • Mokhtari Mohamed Laboratoire RTFM, Ecole Nationale Polytechnique Maurice Audin, Oran, Algeria. ORCID iD0000-0001-7255-2312
  • Madani Kouider Laboratoire LMPM, University Djillali Liabes, Sidi bel Abbes, Algeria. ORCID iD0000-0003-3277-1187
  • Benzaama Habib Laboratoire LABAB, Ecole Nationale Polytechnique Maurice Audin, Oran, Algeria.
DOI
10.3221/IGF-ESIS.50.11
Pages
112-125
Published
Published inVol. 13, No. 50 (2019)Go to the issue

Abstract

The detachment plates 2024T3 by an Araldite adhesive is studied in this work by using the finite element method to predict the damage in traction and compression behavior under the effect of geometrical parameters such as the lap length and the geometric shape of the plates called tapered. The numerical calculation is done by the ABAQUS calculation code. The adhesive has been modeled by an element of the cohesive zone CZM which takes part of the analysis in the first place on the influence of these parameters in mixed mode such as the critical energy and the maximum stress in opening and sliding. It is well shown that the behavior and parameters evaluated condition the resistance of our bonded structure to damage. The effect of these various parameters evaluated on the resistance is presented as results by failure load curves where each value represents an analyzed model.

Keywords

Article history

  1. ReceivedUntil the next stage: 16 days
  2. Revision requestedUntil the next stage: 29 days
  3. RevisedUntil the next stage: 0 days
  4. AcceptedUntil the next stage: 20 days
  5. Published

How to cite

APA

Benamar, B., Mokhtari, M., Madani, K., & Benzaama, H. (2019). Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint. Fracture and Structural Integrity, 13(50), 112–125. https://doi.org/10.3221/IGF-ESIS.50.11

IEEE

B. Benamar, M. Mokhtari, K. Madani, and H. Benzaama, “Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint,” Fracture and Structural Integrity, vol. 13, no. 50, pp. 112–125, 2019, doi: 10.3221/IGF-ESIS.50.11.

MLA

Benamar, Badr, et al. “Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint.” Fracture and Structural Integrity, vol. 13, no. 50, 2019, pp. 112–125. https://doi.org/10.3221/IGF-ESIS.50.11.

Chicago

Benamar, Badr, Mohamed Mokhtari, Kouider Madani, and Habib Benzaama. 2019. “Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint.” Fracture and Structural Integrity 13 (50): 112–125. https://doi.org/10.3221/IGF-ESIS.50.11.

Harvard

Benamar, B., Mokhtari, M., Madani, K. and Benzaama, H. (2019) ‘Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint’, Fracture and Structural Integrity, 13(50), pp. 112–125. doi: 10.3221/IGF-ESIS.50.11.

Vancouver

Benamar B, Mokhtari M, Madani K, Benzaama H. Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint. Fracture and Structural Integrity. 2019;13(50):112-125. doi:10.3221/IGF-ESIS.50.11

BibTeX

@article{benamar2019, author = {Benamar, Badr and Mokhtari, Mohamed and Madani, Kouider and Benzaama, Habib}, title = {Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint}, journal = {Fracture and Structural Integrity}, year = {2019}, volume = {13}, number = {50}, pages = {112--125}, doi = {10.3221/IGF-ESIS.50.11}, url = {https://doi.org/10.3221/IGF-ESIS.50.11}, issn = {1971-8993} }

RIS

TY - JOUR AU - Benamar, Badr AU - Mokhtari, Mohamed AU - Madani, Kouider AU - Benzaama, Habib TI - Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint JO - Fracture and Structural Integrity T2 - Fracture and Structural Integrity PY - 2019 DA - 2019/08/19 VL - 13 IS - 50 SP - 112 EP - 125 DO - 10.3221/IGF-ESIS.50.11 UR - https://doi.org/10.3221/IGF-ESIS.50.11 SN - 1971-8993 ER -

Licence

Copyright © 2019 Badr Benamar, Mohamed Mokhtari, Kouider Madani, Habib Benzaama.

Copyright 
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.  

Open Access Statement

Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.

F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.

Similar articles

Most read articles by the same author(s)