Tip: use quotes for an exact phrase, e.g. "teacher education"
Bolted joints are the most common solution for joining composite components in aerospace structures. Critical structures such as wing to fuselage joints, or flight control surface fittings use bolted joining techniques. Recent research…
In this research, the finite element method is used to develop a numerical model to analyse the effect of the external strengthening of reinforced concrete beams by using carbon Fiber Reinforced Polymer (CFRP) sheets. A finite element…
The flexural behavior of lightweight concrete two-way slabs is investigated in this work, with a focus on the strengthening or repairing method of externally attaching carbon fiber-reinforced polymer (CFRP) sheets. Five 1000 mm by 1000 mm…
This study examines the rehabilitation performance of reinforced concrete bubble deck slabs (with 50 mm and 60 mm voids) strengthened with externally bonded CFRP sheets. Nine specimens were tested: eight bubble slabs (grouped by void size…
Adhesive bonding is the elective joining system between Carbon-Fiber Reinforced Polymer (CFRP) parts because, with respect to fastening, it allows a large connection area, no additional parts (hence weight saving) and no need to drill…
Concrete corbels are short cantilever constructions that may lose their strength over time because of loads that happen over and over again. As an external bonding method for reinforcement, carbon fiber-reinforced polymer (CFRP) strips are…
This paper explores the effect of internal technological defects on the fatigue life of carbon fiber reinforced plastic (CFRP) under simple loading waveforms. One conducted experiments on CFRP specimens with embedded artificial defects…
The widespread use of carbon fibre-reinforced polymer (CFRP) composites in sectors such as aerospace and aviation calls for the adoption of sustainable recycling protocols. This research evaluates the mechanical and tomographic…
The rapid development of inhomogeneous and anisotropic materials like carbon fiber reinforced polymers (CFRP) with epoxy matrices necessitates a multidisciplinary approach for safe use. This approach should integrate computational modeling…
This paper investigates numerically the behavior of Reinforced Concrete (RC) beams, strengthened using Carbon Fiber Reinforced Polymers (CFRP) sheets, subjected to impact loading. Three-dimensional finite element analysis was performed and…
Carbon fiber reinforced plastic (CFRP) materials used for lightweight aircraft structures are susceptible to low velocity accidental impacts during manufacture and while in service. In this study the CFRP laminates subjected to low…
Currently, cellular steel beams are widely used by structural engineers and major companies due to their useful structural applications and serviceable performance. However, these types of steel beams are susceptible to different states of…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
The use of carbon-fiber composite materials (CFRP) in critical cases implies an increase in the resistance to the stability of their mechanical properties. For the purpose of in-depth analysis of defects in the experiments, an integrated…
With the development of the building industry, various novel building materials have emerged. Modern buildings requires higher on performance of building materials, and the performance of old buildings has not been able to keep up the pace…
Current research paper deals with reinforced concrete (R.C.) beams numerical modeling and suggested strengthening procedure if it is required to create an opening within their shear zones. Strengthening is assumed to be achieved during…
The purpose of this study is to explore the numerical behavior of circular RC short columns with different degrees of confinement with CFRP (0%, 25%, 50%, and 100%) wraps under concentric and eccentric loading. The numerical analysis…
This study presents the first investigation into the use of glass fiber reinforced polymer GFRP to strengthen steel beams with web openings. Based on previous research about the strengthening of steel beams with web perforation using…
In this paper experimental results of investigation on reinforced concrete (RC) beams strengthened with the near surface method (NSM) are analyzed considering the response under bending tests on two beams. One of the RC beams was damaged…
An experimental and numerical study was achieved to investigate the behavior of masonry beams internally reinforced using carbon fiber-reinforced polymer (CFRP) and hybrid steel/CFRP reinforcements. In addition, the use of masonry…
This study investigates spall damage and failure in Carbon Fiber-Reinforced Polymer (CFRP) pressure vessels under explosive internal loading using stimulated electric discharge. Analytical modeling, validation with published experimental…
Manufacturing defects are inherent to any manufacturing process. However, in composite materials they might be unavoidable, e.g. ply waviness or even folds of plies are present in complex shaped parts during high pressure resin transfer…
This research examines the performance of reinforced lightweight concrete beams subjected to several degrees of damage (50%, 60%, 70%, and 100%). It can use a sheet made of Carbon Fiber Reinforced Polymer (CFRP) to reinforce. The Full…
Adopting novel sandwich structures with FRP (Fibre Reinforced Polymer) skins and a metallic lattice core, both of which have high specific strength and stiffness, is one way to achieve better mechanical performance while remaining…
The study focuses on examining the impact of internal manufacturing defects (voids and wrinkles) on the mechanical behavior of structural carbon fiber reinforced polymers (CFRP) under shear loading. Specimens of VKU/VSE1212 material with a…
The research focuses on examining the impact of technological defects, specifically "dry-spot" and "wrinkles," on the mechanical behavior and buckling resistance of structural composites. The investigation of the buckling phenomenon was…
The near surface mounted (NSM) method of inserting fiber reinforced polymer (FRP) elements (rods or lamina) into notches has been shown to be a good way for restoring reinforced concrete (RC) elements. The knowledge about the use of…
Nowadays adhesive are widely used in structural applications, in particular for assembly composite materials. In fact, this technique allows to obtain a more uniform load in the joint, to realise a joint with an higher specific strength…
This paper is oriented to the experimental research of the mechanics of the CFRP sandwich plates, glass and carbon fiber sample panels with a large-cell honeycomb core. The method for testing polymer composite sample plates in compression…
Interfacial interaction is investigated between the two basic constituents in carbon fiber reinforced plastics (CFRPs). Efforts have been made to quantify the interfacial shear strength (IFSS) between individual carbon fiber (CF) and epoxy…
The use of bonded externally polymer reinforced fiber (FRP) Laminates has been introduced as an effective approach in rehabilitating (RC) structures due to their high strength, corrosion resistance, reduced weight, and ease of use. This…
The present experimental study includes testing thirteen reinforced concrete beams with openings at different locations to investigate the efficiency of strengthening such openings. Different strengthening techniques around the opening…
A quasi-static approach for an interface damage model, incorporating Rayleigh damping for viscoelastic carbon fiber reinforced polymer composites, is introduced. The interface traction-relative displacement behavior is modeled using a thin…
In this paper, gradual demand for curved, stiffened panels composite emerged from carbon fiber reinforced plastics (CFRP); these are structures that are frequently used in aerospace engineering. Up to 50% of the primary structure of the…
The paper presents an experimental investigation of the flexural behaviour of reinforced concrete (RC) beam elements strengthened externally with stainless steel wire mesh (SSWM). SSWM has the potential to be an alternative composite…
Technology of strengthening reinforced concrete structures with composite materials has found wide application. The effectiveness of strengthening of concrete structures with externally bonded reinforcement is supported by a great deal of…
The core of the present work concerns the analysis of the failure mode and the fracture process induced by the flexural load in Fibre Metal Laminates (FMLs). The influence of the connection layer placed between the composite ones and the…
Concrete-filled steel tubular (CFST) columns are broadly used in many structural systems for their well-known merits. This paper presents a finite element investigation on the structural behaviour of short circular deficient steel tubes…
In this paper, an analytical and numerical study in FEM finite element by the ABAQUS software was conducted. Which aims to study the behaviour of RC beams bending strengthened with SNSM side near surface mounted technique, proposed as a…
This paper aims to disclose the influence law of cracks on instantaneous and long-term deflections of reinforced beam. For this purpose, four concrete beams were created, pre-loaded to varied degrees of cracking, and reinforced with carbon…
FML (Fibre Metal Laminate) is a hybrid material that presents outstanding structural properties, such as resistance to cyclic and dynamic loads, together with low specific weight. This material consists of metal sheets alternating to…
