Tip: use quotes for an exact phrase, e.g. "teacher education"
The effects of large amounts of hydrogen on the fatigue crack growth properties of torsional prestrained ferritic–pearlitic low-carbon steel were investigated. Hydrogen-precharged specimens were produced by conducting cathodic charge to…
In this research, the effect of thermally expandable microcapsules (TEMs) on mode I fracture toughness of structural adhesives were investigated. The single-edge-notch bending (SENB) test was used. Firstly, a standard toughness test was…
The paper investigates the use of 3D-printed components made from Polylactic Acid (PLA) for the restoration of architectural and ornamental elements, focusing on architectural/structural components. The material PLA was chosen for its…
Engineering structures and components are often subjected to random fatigue loading produced, for example, by wind turbulences, marine waves and vibrations. The methods available in the literature for fatigue assessment under random…
The paper presents the results of tests on the fatigue crack growth for a constant moment amplitude under combined bending with torsion in the aluminium alloy AW-2017A-T4. The tests were performed under different values of the load ratio…
There is growing interest in the use of self-consolidating cementitious systems in construction industry. The present research was conducted to enhance the mechanical performance of cement composites by the utilization of micro-sized inert…
Bolted joints are the most common solution for joining composite components in aerospace structures. Critical structures such as wing to fuselage joints, or flight control surface fittings use bolted joining techniques. Recent research…
The paper presents results of calculation for modelling of the stressstrain relationship in the case of block loads with mean load value. A model, based on the stable hysteresis loops, was assumed and modified to use for block loading…
Considerable efforts have been made over the last decades to improve performance of spring steels, which would increase the service time of springs and also allow vehicles weight reduction. There are different possibilities of improving…
In recent times, the shape of the beams evolved from wooden sleepers and then to steel sleepers until they reached concrete sleepers. These sleepers play a very important role in transferring the loads from the train wheels to the subgrade…
An experimental investigation of the mechanical and fracture characteristics of Portland limestone and Corsehill sandstone is undertaken, aiming at enhancing understanding of the structural behaviour of these natural building stones…
This paper presents the study of the mechanical behavior of a microstructure designed to detect acceleration and angular velocity simultaneously. The new resonant micro-sensor proposed, fabricated by the ThELMA© surface-micromachining…
Timber-concrete composite beams, known as TCC beams, have been widely used in rehabilitation or in new buildings where several types of connections are commonly inserted to ensure partial composite action between the timber joist and the…
Isotactic polybutene-1 (i-PB1) is a polymer used for the manufacturing of pressurized pipes. In this work two grades of i-PB1 with a different degree of isotacticity have been investigated; they have been supplied by Basell Polyolefins.…
The core of the present work concerns the analysis of the failure mode and the fracture process induced by the flexural load in Fibre Metal Laminates (FMLs). The influence of the connection layer placed between the composite ones and the…
The present paper is devoted to an experimental study on the fracture behaviour of natural stones, commonly used as elements for building cladding, under both monotonic and cyclic loading, with particular emphasis to white Carrara marble.…
In this paper, the stress intensity factor (SIF) is computed in a circumferentially-cracked round bar (CCRB) subjected to tensile loading, considering that the resistant ligament is circular and exhibits certain eccentricity in relation to…
The purpose of this research is to separate different morphological particles of ASTM class F fly ash, and study their effect on mechanical behaviour and durability of high volume cementitious mixtures. In this research wet separation of…
This study reports an experimental investigation of the fatigue and fracture resistance of R350HT, a heat-treated pearlitic rail steel with refined microstructure used in rails. Monotonic tensile, rotating bending, linear elastic plane…
Stress and displacement fields in multilayered composites with interfacial imperfections, such as imperfect bonding of the layers or delaminations, or where the plies are separated by thin interlayers allowing relative motion, have large…
Austenitic stainless steel (JIS-SUS304L) with a bimodal harmonic structure, which is defined as a coarse-grained structure surrounded by a network of fine grains, was fabricated using powder metallurgy to improve both the strength and…
This article investigates the possibility of exploiting innovative polyvinyl alcohol fibers reinforced with carbon nanotubes (PVA-CNT fiber) as a strain sensor in cement mortars used in the restoration of Cultural Heritage Monuments. Two…
In this study, the relationships between processing, structure and properties of self-reinforced ultra-high molecular weight polyethylene (UHMWPE) composites fabricated via thermal pressing are investigated. By systematically varying…
Finite Fracture Mechanics and Cohesive Crack Model can effectively predict the strength of plain, cracked or notched structural components, overcoming the classical drawbacks of Linear Elastic Fracture Mechanics. Aim of the present work is…
In this article, an analytical study was done to predict the behavior of the beam vis-à-vis bending, buckling, and dynamic responses of isotropic homogeneous beams based on an elastic foundation. The material properties of the FG-beams…
Particleboard (PB) are wood-based composites with fine wood fibers bound together by a small amount of polymeric adhesive, widely used in furniture industry and civil engineering. PB plates can be painted, laminated or veneered, and have…
Multiaxial fatigue is a challenging problem and, consequently, a number of methods has been developed to aid in design of components and assemblies. Following the complexity of the problem, these approaches are often elaborate and it is…
This paper is dedicated to fatigue estimation of implants for spinal surgery. This article deals especially with special case of hollow pedicle screw. Implant systems utilizing specially designed spinal instrumentation are often used in…
The paper describes the key principles and results of preliminary experiments aimed at the development of new technique for the fatigue life prediction under conditions of biaxial cyclic tension. The foundations of the method were…
The present paper aims to assess the effect of freeze/thaw cycles on fracture behaviour of a natural stone: the red Verona marble. A wide variety of specimen types and methods to determine Mode I fracture toughness of natural stones are…
A Multi-Site Damage (MSD) crack growth simulation is presented, carried out by means of Dual Boundary Element Method (DBEM), in a two-dimensional analysis of a cracked butt-joint made of aluminium 2024 T3. An equivalent crack length is…
The paper examines a static bending of porous functional plates (FGP) and rectangular plate solutions, based on an underlying high-order shear deformation theory. The proposed high-order shear deformation theory, as opposed to other…
The fracture process zone (FPZ) was investigated on unnotched and notched beams with different notch depths. Three point bending tests were realized on plain concrete under crack mouth opening displacement (CMOD) control. Crack growth was…
The stress field developed in a circular semi-ring under the combined action of diametral compression and bending is explored both analytically and numerically. The analytic solution is implemented by means of the complex potentials…
Based on the variation principle of Jourdan was developed a mathematical model of the process of widening freely in hot rolling of thin sheet metal. The principle applies to rigid-plastic materials and for the cinematically admissible area…
The modified compact tension (MCT) test, though not yet recognized as a valid test for determining fracture energy of concrete, is believed to represent a plausible and suitable alternative versus other well established procedures, such as…
The aim of the paper was investigation crack initiation and fracture features developed during compression of Fe-based bulk metallic glass (BMG). These Fe-based BMG has received great attention as a new class of structural material due to…
We analyse the problem of a simply supported beam, strengthened with a fibre-reinforced polymer (FRP) strip bonded to its intrados and subjected to bending couples applied to its end sections. A mechanical model is proposed, whereby the…
Glass Fiber Reinforced Polymer (GFRP) I-sections offer a promising alternative to traditional steel reinforcement due to their reduced weight and maintenance requirements. This study aims to optimize the design of GFRP-reinforced composite…
The built-in heterogeneity of the composite laminates has been exploited to tailor the stiffness and strength requirements of modern structures to meet the specific functional demands. However, the non-homogeneity in these composites is…
The objective of this work is to analyze the behavior beams functionally graded, simply supported, under different conditions such as bending, buckling, and vibration and this by use shear deformation theories a two-dimensional (2D) and…
The aim of this study is to deal with the simulation of intralaminar fatigue damage in unidirectional composite under multi-axial and variable amplitude loadings. The variable amplitude and multi-axial loading is accounted for by using the…
Gradient Elasticity (GE) allows the stress analysis to be performed by taking into account the size of the dominant source of microstructural heterogeneity via a suitable length scale parameter. This is done by simply assuming that the…
The scaling of compression strength with porosity for aluminium foams was investigated. The Al 99.96, AlMg1Si0.6 and AlSi11Mg0.6 foams of various porosity, sample size with and without surface skin were tested in compression. It was…
Concretes with water to cement (or binder) ratios of 0.50. 0.40, 0.30 and 0.20 were prepared and long-term mechanical properties were measured. Porous light-weight aggregates (LWA) in dosages of 10 % and 20 % were used for self-curing…
Bridges are regarded as one of the most important components of transportation infrastructure. More and more repairs, inspections, alterations, and construction processes are required to maintain safe usage due to increasing travel demands…
The pipes, during their service, are subjected to accumulated loads such as internal pressure and that of the soil. The latter considerably accelerate their damage. In this work, the bending moment stress of API 5L X70 category steel…
The fatigue behaviour of concrete has become more important for the design of constructions due to the desire to build slimmer structures, which are more sensitive to fatigue loading. This article aims to evaluate and compare the fatigue…
Ultrasonic fatigue at an operating frequency of 20 kHz was conducted on thermally treated clay bricks at 500, 750, and 1000 °C with a holding time of 5 h, using a three-point bending setup to assess their fatigue endurance. A Vickers…
An experimental and numerical study was achieved to investigate the behavior of masonry beams internally reinforced using carbon fiber-reinforced polymer (CFRP) and hybrid steel/CFRP reinforcements. In addition, the use of masonry…
