Tip: use quotes for an exact phrase, e.g. "teacher education"
Additive layer manufacturing has recently gained a lot of interest due to the feasibility of producing metallic components directly from a computer-aided design file of the part. Selective laser melting, one of the main additive layer…
The development of additive technologies for manufacturing safety‑critical components operating under vibration must be accompanied by a careful analysis of the material’s resistance to high‑cycle fatigue (HCF). This paper presents a…
Additive manufacturing has been recently employed in industrial sectors with the fundamental requirement for zero defect parts. Technological developments in additive manufacturing notwithstanding, there continues to be a scarcity of…
The main goal of the present research is to propose an integrated methodology to address the fatigue performance of topology optimized components, produced by additive manufacturing. The main steps of the component design will be…
Additive manufacturing (AM) could be used to reduce the production times of prototypes; however, further research is required to address metals structural parts. To obtain the correct properties, some relevant factors to be considered are…
Porous materials are defined as materials that contain holes, voids, or spaces in their structures, which can be interconnected or isolated. In the most complex forms of these materials, the holes can have irregular shapes with a random…
The increasing interest in additively manufactured metallic parts from industry has issued a formidable challenge to the academic and scientific world that is asked to design new alloys, optimize process parameters and geometry as well as…
The aim of this work is to evaluate the mechanical properties and failure analysis of cellular core structures with different geometries that were obtained by additive manufacturing. Sandwich panels are widely used in the aerospace and…
The size and shape of individual grains, play an important role in the mechanical behavior of granular materials such as the strength and stability of railway ballast. The aim of this research is to study materials from which uniform…
Additive manufacturing techniques continue to develop and cover all industrial fields. However, the performances of aspect and mechanical behavior of the parts obtained by this process remain to be mastered and are still the subject of…
Onyx ® is a new material composed of Polyamide 6 reinforced with short carbon fiber, used in the novel additive manufacturing composites technique. This paper aims to present the axial fatigue performance of this material with and without…
While Additive Manufacturing (AM) of polymers has matured from rapid prototyping to functional production, the layer-wise fabrication process introduces significant mechanical anisotropy and microstructural heterogeneity, which complicates…
Additive Manufacturing (AM) is a new innovative technique that allows the direct fabrication of complex, individual, delicate and high-strength products, based on their 3D data. Selective Laser Melting (SLM) is one of the AM processes that…
The mechanical methods for measuring residual stresses typically rely on so-called destructive techniques where some stress components can be determined based on part deflection after material removal (cutting, etching, drilling, etc.).…
Additive Manufacturing (AM) is a technological process in which elements are fruitfully built up adding materials layer by layer. AM had a massive development in recent times, thanks to its intrinsic advantages, especially if compared with…
The present study of Ti6Al4V alloy production via Electron Beam Melting (EBM) represents a cutting-edge research topic impacting different strategic engineering applications. This can be attributed to the widespread use of this alloy and…
The escalating importance of lightweight design in engineering demands innovative strategies to tackle this challenge. Traditionally, the joining of these materials involves rivets, bolts, or adhesives. However, contemporary manufacturing…
Various input variables, including corrosion time, fretting force, stress, lubrication, heat-treating, and nano-particles, were evaluated by modeling of stress-controlled fatigue lifetimes in AlSi12CuNiMg aluminum alloy of the engine…
Additive manufacturing research is continuously growing, and this field requires a full improvement of the capability and reliability of the processes involved. Of particular interest is the study of complex geometries production, such as…
The possibility of producing high carbon steel/Inconel 718 bimetallic parts via Fused Filament Fabrication and Sintering is explored. Compatibility of the two alloys with particular attention to elements interdiffusion through the…
This paper presents a study on the tensile, fracture, damage, and reliability properties of 3D printed polylactic acid (PLA), based on a series of experiments. The study focuses on polylactic acid (PLA) samples produced using fused…
Additive manufacturing (AM) is revolutionizing various industries by enabling the creation of complex structures with minimal waste. In the context of a circular economy, the importance of recycling cannot be overstated, as it plays a…
Additive manufacturing is extensively used for the production of complex-shaped parts from metals and polymers. Because of the influence of various physical factors, the structure of materials processed under different processing…
The use of components obtained through the additive manufacturing (AM) technique has become increasingly widespread in recent years, playing a central role in industrial production, and in particular in some fields such as automotive…
Different alloys can be used for Additive Manufacturing (AM) with good structural strength. Among the titanium alloys, Ti6Al4V is the most used, especially for aerospace applications. There have been many analyses of the mechanical…
Adding short carbon fiber reinforcement to thermoplastic matrices can improve the mechanical performance of additively manufactured polymer-based composites. This work examines the flexural behavior of Fused Deposition Modeling…
Adopting novel sandwich structures with FRP (Fibre Reinforced Polymer) skins and a metallic lattice core, both of which have high specific strength and stiffness, is one way to achieve better mechanical performance while remaining…
Abstract. In this article, the effect of nano-clay particles and heat-treating on thermo-mechanical fatigue (TMF) behaviors and failures of piston aluminum-silicon (AlSi) alloys was investigated. For this purpose, thermo-mechanical fatigue…
The paper presents the results of computer simulation of a hybrid removable complete dentures (RCD) of a maxilla and analysis of its stress–strain states (SSSs) under typical operational loads. For improving their strength and stiffness…
Additive manufacturing (AM) technologies are currently contributing to significant progress in the design of lightweight metal components. Al alloys constitute the most studied light metal, particularly the Al-Si ones, due to their high…
Conductive PLA is an innovative composite material that combines the ecological benefits of polylactic acid, a biodegradable thermoplastic, with electrical conductivity properties. Usually used in additive manufacturing for its ease of…
In recent years, 3D printing technology has assumed an important role in advanced construction processes across various engineering fields. Among these, the application to the architectural restoration of historic structures is…
This article presents the bending fatigue behavior and the scatter-band analysis of aluminum alloys under beneficial conditions of nano-clay-particles and heat-treating, compared to detrimental conditions of the mechanical stress and the…
This paper investigates the combined effect of corrosion and fatigue on the growth of cracks that arise from natural corrosion in steel bridges. It is shown that if these two effects need to be simultaneously analyzed. If not, then the…
This study aims to assess the delamination effect and predict the evolution of damage in 3D printed specimens to investigate the mechanical behavior occurring due to the delamination of the layers of 3D printed thermoplastic polymers.…
The paper investigates the use of 3D-printed components made from Polylactic Acid (PLA) for the restoration of architectural and ornamental elements, focusing on architectural/structural components. The material PLA was chosen for its…
This paper addresses the estimation of critical loads in FFF (Fused Filament Fabrication) printed polymers and composites containing notches. Particularly, the analysis is focused on the fracture load estimations of 39 PLA (polylactic…
Hybrid continuous fiber–reinforced composites produced by fused deposition modeling (FDM) offer a promising solution for lightweight load-bearing structures. However, their mechanical performance is strongly governed by internal…
This study investigates the mechanical behavior of 3D-printed polyethylene terephthalate glycol (PETG) polymer specimens subjected to tensile and shear testing, with a particular focus on the influence of raster orientation and shell…
Additive manufacturing (AM) is a promising way to produce complex structures by adding layers. It arises great interest both in industrial and academic sectors to develop new advanced structured material. To benefit from its advantages, it…
The increase in life expectancy and attention to the quality of life of elderly people spurred the need, in the last decades, to increase the capabilities of medical and surgical techniques. Among these, the development of prosthetic…
The phenomenon of brittle fracture occurs too often in various branches of engineering being the reason of unexpected termination of anticipated service lives of an engineering objects. This leads to unfortunate catastrophic structural…
In this paper, fly ash, ladle furnace slag and limestone filler were utilized in concrete used as material for additive manufacturing (3D printing). Fly ash and ladle furnace slag were used as a replacement of cement (30% wt.) and…
The objective of the present paper is to investigate the stress-controlled low-cycle fatigue behavior of piston aluminum-silicon (AlSi) alloy reinforced with nano-clay particles and T6 heat-treatment. The piston aluminum-silicon alloy…
