Search the articles

Miscellanea Views: 1,324 Downloads: 376 Vol. 8, No. 30 (2014) September 10, 2014 pp. pages 191-200

The specific heat loss combined with the thermoelastic effect for an experimental analysis of the mean stress influence on axial fatigue of stainless steel plain specimens

G. Meneghetti, M. Ricotta, B. Atzori

The energy dissipated to the surroundings as heat in a unit volume of material per cycle, Q, was recently proposed by the authors as fatigue damage index and it was successfully applied to correlate fatigue data obtained by carrying out…

10.3221/IGF-ESIS.30.25Copy the DOI link

Details: The specific heat loss combined with the thermoelastic effect for an experimental analysis of the mean stress influence on axial fatigue of stainless steel plain specimens PDF

PDF

Miscellanea Views: 1,452 Downloads: 522 Vol. 8, No. 30 (2014) September 11, 2014 pp. pages 273-281

Biaxial fatigue tests and crack paths for AISI 304L stainless steel

V. Chaves, C. Madrigal, A. Navarro

AISI 304L stainless steel specimens have been tested in fatigue. The tests were axial, torsional and in-phase biaxial, all of them under load control and R=-1. The S-N curves were built following the ASTM E739 standard and the method of…

10.3221/IGF-ESIS.30.34Copy the DOI link

Details: Biaxial fatigue tests and crack paths for AISI 304L stainless steel PDF

PDF

Miscellanea Views: 962 Downloads: 580 Vol. 11, No. 39 (2017) December 15, 2016 pp. Pages 201-215

Fatigue assessment by energy approach during tensile tests on AISI 304 steel

A. Risitano, D. Corallo, E. Guglielmino, G. Risitano, L. Scappaticci

Estimation of the fatigue limit for steel ductile materials using non-destructive methods is a topic of great interest to researchers today. In recent years, the method adopted has implemented infrared sensors to detect the surface…

10.3221/IGF-ESIS.39.20Copy the DOI link

Details: Fatigue assessment by energy approach during tensile tests on AISI 304 steel PDF

PDF

Miscellanea Views: 1,071 Downloads: 584 Vol. 5, No. 17 (2011) pp. pages 15-22

Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation

B. Atzori, G. Meneghetti, M. Ricotta

In this paper the fatigue behaviour of a stainless steel AISI 304L is analysed. In the first part of the work the results obtained under constant amplitude fatigue are presented and synthesised in terms of both stress amplitude and energy…

10.3221/IGF-ESIS.17.02Copy the DOI link

Details: Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation PDF

PDF

Miscellanea Views: 1,597 Downloads: 1,709 Vol. 10, No. 35 (2016) December 29, 2015 pp. pages 260-270

A cohesive zone model to simulate the hydrogen embrittlement effect on a high-strength steel

G. Gobbi, C. Colombo, L. Vergani

The present work aims to model the fracture mechanical behavior of a high-strength low carbon steel, AISI 4130 operating in hydrogen contaminated environment. The study deals with the development of 2D finite element cohesive zone model…

10.3221/IGF-ESIS.35.30Copy the DOI link

Details: A cohesive zone model to simulate the hydrogen embrittlement effect on a high-strength steel PDF

PDF

Miscellanea Views: 920 Downloads: 515 Vol. 10, No. 37 (2016) June 13, 2016 pp. 228-233

Biaxial fatigue tests of notched specimens for AISI 304L stainless steel

G. Beretta, V. Chaves, A. Navarro

High cycle fatigue tests were conducted for stainless steel AISI 304L. The geometry was a thin walled tube with a passing through hole. The tests were axial, torsional and in-phase axial-torsional, all of them under load control with R =…

10.3221/IGF-ESIS.37.30Copy the DOI link

Details: Biaxial fatigue tests of notched specimens for AISI 304L stainless steel PDF

PDF

Miscellanea Views: 755 Downloads: 738 Vol. 16, No. 62 (2022) September 22, 2022 pp. 212-224

Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel

Nicolás Emanuel Tenaglia, Diego Fernandino, Alejandro Daniel Basso

In this work, the effect of Ti addition and the cast part size on the solidification structure and mechanical properties of a medium carbon, low alloy cast steel was analyzed. The experimental analysis involved the design of the melts by…

10.3221/IGF-ESIS.62.15Copy the DOI link

Details: Effect of Ti addition and cast part size on solidification structure and mechanical properties of medium carbon, low alloy cast steel PDF Visual Abstract

PDF Visual Abstract

Advanced Manufacturing and Processing Views: 758 Downloads: 779 Vol. 18, No. 67 (2024) December 17, 2023 pp. 176-191

Investigations on tool wear behavior in turning AISI 304 stainless steel: An empirical and neural network modeling approach

Satish Chinchanikar, Mahendra Gadge

Machining with a cutting edge with extensive damage or a fractured cutting edge significantly influences the machining performance. Therefore, investigations on tool wear behavior, their forms, and wear mechanisms will be very helpful in…

10.3221/IGF-ESIS.67.13Copy the DOI link

Details: Investigations on tool wear behavior in turning AISI 304 stainless steel: An empirical and neural network modeling approach PDF Visual Abstract

PDF Visual Abstract

SI: Fracture and Structural integrity: ten years of F&IS Views: 826 Downloads: 507 Vol. 13, No. 47 (2019) December 6, 2018 pp. 334-347

Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens

Daniele Rigon, Mauro Ricotta, Giovanni Meneghetti

In the last years, a large amount of fatigue test results from plain and bluntly notched specimens made of AISI 304L stainless steel were synthetized in a single scatter band by adopting the specific heat loss per cycle (Q) as a damage…

10.3221/IGF-ESIS.47.25Copy the DOI link

Details: Analysis of dissipated energy and temperature fields at severe notches of AISI 304L stainless steel specimens PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 827 Downloads: 537 Vol. 2, No. 4 (2008) pp. pages 12-19

Effect of Carbon and Nitrogen content on deformation and fracture of AISI 304 austenitic stainless steel

A. Molinari, M. Composta, C. Menapace

In questo lavoro è stato studiato l'effetto di modeste differenze nel contenuto di carbonio e di azoto sulla deformazione e il comportamento a frattura a temperatura ambiente di un acciaio inossidabile austenitico AISI 304. Nell'acciaio…

10.3221/IGF-ESIS.04.02Copy the DOI link

Details: Effect of Carbon and Nitrogen content on deformation and fracture of AISI 304 austenitic stainless steel PDF

PDF

Miscellanea Views: 1,025 Downloads: 642 Vol. 11, No. 41 (2017) June 28, 2017 pp. Pages 332-338

Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L

Gabriel Giannini de Cunto, Arnaldo Homobono Paes de Andrade, Waldemar Alfredo Monteiro

The paper presents a study of the application of Leak-Before- Break (LBB) concept in a relatively small-diameter high energy reactor coolant line, where it is proposed type AISI 316LN to be used as base material welded with type AISI 316L…

10.3221/IGF-ESIS.41.44Copy the DOI link

Details: Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L PDF

PDF

Fatigue and Fracture of metallic alloys Views: 1,001 Downloads: 647 Vol. 18, No. 68 (2024) February 15, 2024 pp. 175-185

Ultrasonic fatigue testing of AISI 304 and 316 stainless steels under environmental and immersion conditions

Luis M. Torres Duarte, Gonzalo Mariano Domínguez Almaraz, Hipólito M. Venegas Montaño

Ultrasonic fatigue tests were carried out on stainless steel AISI 316 and 304, under two modalities: at room temperature and in immersion (water for 316 and antifreeze for 304 steels); all tests were carried out with a loading ratio R=-1.…

10.3221/IGF-ESIS.68.11Copy the DOI link

Details: Ultrasonic fatigue testing of AISI 304 and 316 stainless steels under environmental and immersion conditions PDF Visual Abstract

PDF Visual Abstract

Fatigue and Fracture of metallic alloys Views: 550 Downloads: 457 Vol. 19, No. 72 (2025) January 7, 2025 pp. 15-25

Rolling contact fatigue of AISI 440C TiN coated by plasma based ion implantion and deposition

Maria Paula Gonzalez, Diego Colombo, Diego Omar Fernandino

In this work, the microstructural evolution, surface characteristics and wear behavior of high hardness AISI 440C samples coated with a TiN film synthesized at room temperature were investigated. The coating was deposited using a combined…

10.3221/IGF-ESIS.72.02Copy the DOI link

Details: Rolling contact fatigue of AISI 440C TiN coated by plasma based ion implantion and deposition PDF HTML Visual Abstract

PDF HTML Visual Abstract

Miscellanea Views: 933 Downloads: 485 Vol. 10, No. 35 (2016) December 29, 2015 pp. pages 172-181

Experimental estimation of the heat energy dissipated in a volume surrounding the tip of a fatigue crack

G. Meneghetti, M. Ricotta

Fatigue crack initiation and propagation involve plastic strains that require some work to be done on the material. Most of this irreversible energy is dissipated as heat and consequently the material temperature increases. The heat being…

10.3221/IGF-ESIS.35.20Copy the DOI link

Details: Experimental estimation of the heat energy dissipated in a volume surrounding the tip of a fatigue crack PDF

PDF

Integrity of materials and structures Views: 421 Downloads: 301 Vol. 20, No. 75 (2026) October 25, 2025 pp. 179-199

Optimization of austenitic and ferritic steels for deep drawing. Part 2: FEM analyses with damage development.

Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Andreotti, Barbara Rivolta

Deep drawing of sheet metal is a crucial industrial process due to its high productivity and low cost per unit produced. Stainless steels are ideal for this process, given their high deformability compared to other steels. Despite its…

10.3221/IGF-ESIS.75.13Copy the DOI link

Details: Optimization of austenitic and ferritic steels for deep drawing. Part 2: FEM analyses with damage development. PDF HTML Visual Abstract

+1Other formats

Podcast

PDF HTML Visual Abstract Podcast

Miscellanea Views: 1,030 Downloads: 491 Vol. 11, No. 41 (2017) June 28, 2017 pp. Pages 299-306

The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens

G. Meneghetti, M. Ricotta

Metallic materials dissipate thermal energy when subjected to fatigue. Some of them, due a favorable combination of thermo-physical material properties, exhibit a significant temperature rise, which can be easily measured in-situ by means…

10.3221/IGF-ESIS.41.40Copy the DOI link

Details: The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens PDF

PDF

Miscellanea Views: 786 Downloads: 455 Vol. 13, No. 48 (2019) March 7, 2019 pp. 429-441

Experimental investigation of surface roughness effect on fatigue performance of AISI 1045 carbon steel and fatigue limit prediction

Khadija Kimakh, Abdelkerim Chouaf, Amal Saoud, El Hassan Mallil, Samir Aghzer

In fatigue life, surface integrity perform a major role to determine the fatigue lifetime. It could differ greatly among specific cases even for the same solicitations. Indeed, the manufacturing process carries modifications on surface…

10.3221/IGF-ESIS.48.41Copy the DOI link

Details: Experimental investigation of surface roughness effect on fatigue performance of AISI 1045 carbon steel and fatigue limit prediction PDF Visual Abstract

PDF Visual Abstract

Integrity of materials and structures Views: 535 Downloads: 553 Vol. 20, No. 75 (2026) October 18, 2025 pp. 104-123

Optimization of austenitic and ferritic steels for deep drawing. Part 1: metallurgical and mechanical analyses.

Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Gerosa, Barbara Rivolta

Deep drawing of stainless steels thin sheets is a cold forming process used to produce components with complex geometries at limited costs. Although it seems a simple shaping technique, this technology requires a high level of know-how…

10.3221/IGF-ESIS.75.09Copy the DOI link

Details: Optimization of austenitic and ferritic steels for deep drawing. Part 1: metallurgical and mechanical analyses. PDF HTML Visual Abstract

+1Other formats

Podcast

PDF HTML Visual Abstract Podcast

Miscellanea Views: 1,131 Downloads: 413 Vol. 13, No. 47 (2019) December 2, 2018 pp. 126-140

Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading

Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto

A series of strain-controlled multiaxial low cycle fatigue (LCF) tests under proportional and non-proportional loading conditions have been conducted on notched specimens. Cylindrical bars of Al 6061 aluminum alloy and AISI 316L stainless…

10.3221/IGF-ESIS.47.10Copy the DOI link

Details: Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading PDF Visual Abstract

PDF Visual Abstract

SI: Characterisation of Crack Tip Fields Views: 613 Downloads: 588 Vol. 13, No. 49 (2019) June 7, 2019 pp. 82-96

On relation between J-integral and heat energy dissipation at the crack tip in stainless steel specimens

Giovanni Meneghetti, Mauro Ricotta, Giuseppe Pitarresi

In this paper, an experimental procedure to evaluate the elastic-plastic J-integral at the tip of a fatigue crack is presented. According to this new approach, the elastic component of the J-integral is derived from Thermoelastic Stress…

10.3221/IGF-ESIS.49.09Copy the DOI link

Details: On relation between J-integral and heat energy dissipation at the crack tip in stainless steel specimens Visual Abstract PDF

Visual Abstract PDF

Analytical, computational and physical models Views: 513 Downloads: 312 Vol. 20, No. 75 (2026) November 23, 2025 pp. 373-389

Coupling crystal plasticity and microstructure in SLM manufactured 316L parts: model development and experimental assessment

Nikita Kondratev, Alexey Shveykin, Kirill Romanov, Rinetta Mosina, Igor Shishkovsky, Evgeny Kharanzhevskiy, Mikhail Krivilyov

Additive manufacturing is extensively used for the production of complex-shaped parts from metals and polymers. Because of the influence of various physical factors, the structure of materials processed under different processing…

10.3221/IGF-ESIS.75.27Copy the DOI link

Details: Coupling crystal plasticity and microstructure in SLM manufactured 316L parts: model development and experimental assessment PDF HTML Visual Abstract

+1Other formats

Podcast

PDF HTML Visual Abstract Podcast

Fatigue Views: 1,055 Downloads: 6,460 Vol. 15, No. 58 (2021) September 25, 2021 pp. 344-364

Determining the endurance limit of AISI 4340 steels in terms of different statistical approaches

Salim Çalışkan, Rıza Gürbüz

In engineering applications, fatigue phenomenon is a key issue and needs to be analyzed in the beginning of design phase in case of any component exposed to alternating loading on operation otherwise catastrophic fatigue failure may cause.…

10.3221/IGF-ESIS.58.25Copy the DOI link

Details: Determining the endurance limit of AISI 4340 steels in terms of different statistical approaches PDF Visual Abstract

PDF Visual Abstract

SI: Fracture Mechanics versus Environment Views: 573 Downloads: 491 Vol. 13, No. 50 (2019) July 17, 2019 pp. 98-111

Environmental effects on the reliability of an AISI 304 structure

Racim Boutelidja, Abdelmoumene Guedri, Mohammed Amine Belyamna, Bachir Merzoug

This work is based on the application of probabilistic fracture mechanics (MRP) models to predict the reliability of pressure pipelines in nuclear power reactors. The simulation of cracking of stainless steel piping under the conditions of…

10.3221/IGF-ESIS.50.10Copy the DOI link

Details: Environmental effects on the reliability of an AISI 304 structure PDF Visual Abstract

PDF Visual Abstract