Tip: use quotes for an exact phrase, e.g. "teacher education"
This study aims to investigate fatigue growth behaviour in AA7075-T651 under non-proportional mixed mode I and II loads. Fatigue tests were performed under cyclic tension and torsion using a thin-walled tubular specimen with a key-hole…
In this study, experimental and numerical results of compact tension shear (CTS) specimen and a new specimen type under in-plane mixed mode (Mode-I/II) loading conditions are compared with existing inplane mixed mode fracture criteria to…
The mixed mode loading configuration occurs in many civil engineering and mechanical applications. In wood material, the study of this problem is very important due to the orthotropic character and the heterogeneity of the material. In…
In this study, to investigate and understand the nature of fracture behavior properly under in-plane mixed mode (Mode-I/II) loading, three-dimensional fracture analyses and experiments of compact tension shear (CTS) specimen are performed…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
This paper is devoted to the analysis of the load path effect on I+II+III mixed mode fatigue crack propagation in a 316L stainless steel. Experiments were conducted in mode I+II and in mode I+II+III. The same maximum, minimum and mean…
The fictitious notch rounding concept is applied for the first time to V-notches with root hole subjected to in-plane mixed mode loading. Out-of-bisector crack propagation is taken into account. The fictitious notch radius is determined as…
Durability and sustainability of structures made from concrete like materials is getting more into an interest of civil engineers. Structures are subjected not only to uniaxial load, this means if there is a crack inside the load could be…
In this paper are presented the crack initiation angles obtained in polyurethane (PUR) foams under mixed mode loading. Closed cell rigid PUR foams having three different densities 100, 145, and 300 kg/m3 were investigated. Experiments were…
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
The present contribution reviews a recently proposed method to rapidly estimate the averaged SED at the tip of short as well as long cracks under in-plane I+II and long cracks under out-of-plane I+III mixed mode loadings. Short cracks are…
The minimum plastic zone radius (MPZR) criterion is one of the recent criterions to estimate crack initiation direction under mixed mode loading. The MPZR theory is based on the theoretical computations of plastic zone size (PZS). In this…
In this work, a link between the averaged strain energy density (SED) approach and the peak stress method in the case of cracks subjected to mixed mode (I+II) loading has been investigated. Some closed-form expressions of the strain energy…
This paper deals with the influence of the cold drawing process on the fracture behaviour of pearlitic steels. To this end, fracture tests under axial loading were performed on steel wires with different drawing degree (from a hot rolled…
The focus of manufacturing is more and more on innovative and application-oriented products considering lightweight construction. Hence, especially functional graded materials come to the fore. Due to the application-matched functional…
Mixed mode crack propagation analysis has been more accessible with the development of new numerical tools, allowing to evaluate the influence of non-mode I loadings in the crack path and in the growth rate. The aim of this work is to…
In the present work, a new model of the FRP-concrete or masonry interface, which accounts for the coupling occurring between the degradation of the cohesive material and the FRP detachment, is presented; in particular, a coupled…
This paper investigates the fracture properties and notch effect of PUR materials with four different densities. The asymmetric semi-circular bend specimen was adapted to perform mixed mode fracture toughness tests. This semi-circular…
A three-dimensional crack propagation simulation is performed by the Dual Boundary Element Method (DBEM). The Stress Intensity Factors (SIFs) along the front of a semi elliptical crack, initiated from the external surface of a hollow axle…
The crack growth behavior of the aluminum alloy 6061 T651 was investigated using cruciform specimens with a measurement area of 120 x 120 x 2 mm3 with two center crack configurations of the starting notch parallel to one of the loading…
The advances in the use of thermoelastic stress analysis (TSA) for fracture mechanics assessment are reviewed. The development of techniques to determine stress intensity factor is presented followed by the application of these techniques…
Structural components made of fibre-reinforced materials are frequently used in engineering applications. Fibre-reinforced composites are multiphase materials, and complex mechanical phenomena take place at limit conditions but also during…
The present authors have previously proposed a novel ‘plastic inclusion’ approach for dealing with the local plasticity which occurs at the tip of a growing fatigue crack. This meso-scale model provides a modified set of crack tip stress…
From experimental and theoretical investigations it is known that cracks are sensitive to geometry, e.g., to the inclination angle to the load. A small deviation of a crack from the normal direction to a tensile load causes mixed mode…
In the present paper, the mechanical behaviour of edge-cracked nanobeams under Mixed-Mode loading is analytically investigated by means of the Stress-Driven nonlocal model. Firstly, the proposed formulation is outlined, and then applied to…
This paper provides the background for practical applications of nonlinear fracture resistance parameters for structural integrity assessment of aviation structures with initial cracks. The subject of this numerical study is a fragment of…
In this work, the prediction of crack initiation angle (θo) under mixed mode (I/II) load is estimated from the generalized minimum plastic zone radius (GMPZR) criterion. The paper presents a detailed study on the crack-tip plastic core for…
The purpose of this article is to present the stress intensity factors (SIF) solutions for semi-elliptic crack in pipelines under internal pressures, the stress intensity factors are calculated by the three-dimensional finite element…
Crack trajectories under different loading conditions and material microstructural features play animportant role when the conditions of crack initiation and crack growth under fatigue loading have to beevaluated. Unavoidable…
The concept of the average stress has been employed to propose the maximum average tangential stress (MATS) criterion for predicting the direction of fracture angle. This criterion states that a crack grows when the maximum average…
At intermediate service temperatures hot mix asphalt (HMA) concretely are subjected to different loading rates due to movement of vehicles which can significantly affect their mechanical characteristics and final service load. Hence, in…
The plastic zone is theoretically and numerically analyzed for various combinations of the nonsingular terms xx T to zz T ratios in connection with specimen thickness under mode I loading. The plastic zone size distribution is based on the…
In mixed-mode conditions, the competing contribution of the different stress intensity factors predicts fracture initiation load as well as crack propagation direction. Commonly, mixed-mode fracture resistance is based on the assumption of…
The Compact Tension Shear (CTS) specimen is used to study fracture and fatigue under mixed mode I/II loading conditions. Existing K solution was developed for fracture studies and it does not consider the effect of crack deflection. The…
Fiber Reinforced Plastic (FRP) can be used for strengthening concrete or masonry constructions. One of the main problem in the use of FRP is the possible detachment of the reinforcement from the support material. This paper deals with the…
In this paper, determination of the accurate notch stress intensity factors (NSIFs) have been demonstrated using a recently proposed technique: The point substitution displacement technique (PSDT) for the sharp Vnotched configurations. In…
The detachment plates 2024T3 by an Araldite adhesive is studied in this work by using the finite element method to predict the damage in traction and compression behavior under the effect of geometrical parameters such as the lap length…
Nowadays the demand for high strength steels is increasing. In order to design and develop high performance products, it is essential to understand the fatigue behavior of these materials. When considering welded components, the fatigue…
Experimental loading and FEM simulation-based approach at macroscale are utilized to investigate the failure mechanisms of Al2O3 ceramics. Experimental characterization of microstructure is carried out using SEM. Recently the microscale…
A finite rectangular plate of unit thickness with two inclined cracks (parallel and non parallel) under biaxial mixed mode condition are modelled using finite element method. The finite element method is used for determination of stress…
The primary objective of this manuscript is studying the effect of T-stress term (T) on the crack propagation angle (CPA) and fracture toughness of in-plane mixed mode loading by utilizing a generalized form of minimum strain energy…
In this paper the fatigue crack growth tests were carried out on surface-crack tension (SCT) specimens, made of 7050 and Ti6Al4V alloys, with initial semi-elliptical surface cracks. Pure Mode I conditions were realized on SCT specimens…
Highly deformable materials (elastomers, gels, biological tissues, etc.) are ubiquitous in nature as well as in technology. The understanding of their flaw sensitivity is crucial to ensure a desired safety level. Fracture failure in soft…
Hybrid continuous fiber–reinforced composites produced by fused deposition modeling (FDM) offer a promising solution for lightweight load-bearing structures. However, their mechanical performance is strongly governed by internal…
A present study reveals the influence of nano Al2O3 and ZrO2 reinforcements on the fracture toughness of Hybrid Metal matrix Composites (HMMCs) made of Al6061 alloy. Composites are synthesized by varying weight fraction of alumina and…
In this study a procedure to stress intensity factors calculation for imitation models made of titanium alloy is described. In service fatigue cracks are detected in a disk and blade “dovetail type” attachment. On the base of this…
Most research on the mode II fracture toughness of fiber-reinforced concrete (FRC) has intentionally avoided bridging fibers at pre-notch surfaces by using a through-thickness crack (TTC) that cuts the entire thickness, including fibers in…
In this paper the plastic stress intensity factor (SIF) is used to study the coupling effects of loading biaxiality, material properties and cracked body configuration in both the small- and large-scale yielding ranges. A finite element…
In this study, we present a new implementation of the phase field fracture approach in the finite element code ANSYS and its numerical background. The framework is general, and is supported by addressing several classical 2D boundary value…
