Tip: use quotes for an exact phrase, e.g. "teacher education"
The fivefold symmetric modular stellarator Wendelstein 7-X (W7-X) is currently under construction in Greifswald, Germany. The superconducting coils of the magnet system are bolted onto a central support ring and interconnected with five…
An edge crack propagation in a steel bar of circular cross-section undergoing multiaxial fatigue loads is simulated by Finite Element Method (FEM). The variation of crack growth behaviour is studied under axial and combined in phase…
Selected methods for calculating notch tip strains and stresses in elastic–plastic isotropic bodies subjected to multiaxial monotonic loading were compared. The methods use sets of equations where hypothetical notch tip elastic strains and…
Numerical analyses of contact task were made with FEM. The test sample for the task was a steel-fibre reinforced concrete foundation slab model loaded during experimental loading test. Application of inhomogeneous half-space was used in…
Deep drawing of sheet metal is a crucial industrial process due to its high productivity and low cost per unit produced. Stainless steels are ideal for this process, given their high deformability compared to other steels. Despite its…
The Strong Formulation Finite Element Method (SFEM) is a numerical solution technique for solving arbitrarily shaped structural systems. This method uses a hybrid scheme given by the Differential Quadrature Method (DQM) and the Finite…
The critical plane calculation for multiaxial damage assessment is often a demanding task, particularly for large FEM models of real components. Anyway, in actual engineering requests, sometime, it is possible to take advantage of the…
Bolted joints are the most common solution for joining composite components in aerospace structures. Critical structures such as wing to fuselage joints, or flight control surface fittings use bolted joining techniques. Recent research…
The S-version Finite Element Method (FEM) is known as a global-local superimposed approach that consists of two separate meshes referred to as global and local cracks. The relationship between the energy release rate and the Stress…
Two cracks, initiated from the opposite tips of a central notch inclined by 45°, were considered in cruciform specimens made of Ti6246. A static load was applied to a cruciform arm while a cyclic load was applied along the other arm.…
The investigation of fatigue strength of lotus-type structure with nodular cast iron as a base material using computational model is analysed in present study. The irregular pores distribution in transversal and longitudinal direction…
The increase in life expectancy and attention to the quality of life of elderly people spurred the need, in the last decades, to increase the capabilities of medical and surgical techniques. Among these, the development of prosthetic…
This study is motivated from the collapse of an old masonry building in the Southern Italy. FEM analyses are carried out focusing on the influence of the contrasting wall on the stability of the vault. In the analyses, the structure is…
During the braking phase, the heat produced by friction between pads and disc cannot be entirely dissipated. Consequently, the brake disc, especially if very hard braking occur, can accumulate large amounts of heat in a short time so…
The most important performance for repair materials is adhesion to the substrate. The authors experimentally find out that high modulus fine aggregates in repair material enhance strength of it as well as the strength of the interface…
This work analyses the results of a simple forming process of an AA6060 aluminium alloy sheet in order to validate the development of a simulation model based on the finite element method (FEM). This work represents the starting point of a…
In the last decades the modeling of masonry structures has become an argument particularly appealing for many researchers and a large variety of numerical techniques have been formulated with the aim to produce practical applications in…
The use of Ni-Ti alloys in the practice of endodontic comes from their important properties such as shape memory and superelasticity phenomena, good corrosion resistance and high compatibility with biological tissues. In the last twenty…
Thermal barrier coatings (TBCs) are advanced material systems used to enhance performance and in-service life of components operated at high temperatures in gas turbines and other power-generation devices. Because of complexity, numerical…
In this paper, the initial and maximum load was studied using the Finite Element Modeling (FEM) analysis during impact testing (CVN) of pipeline X70 steel. The Gurson-Tvergaard-Needleman (GTN) constitutive model has been used to simulate…
The present contribution reviews a recently proposed method to rapidly estimate the averaged SED at the tip of short as well as long cracks under in-plane I+II and long cracks under out-of-plane I+III mixed mode loadings. Short cracks are…
In this study, the influences of crack parameters like crack location from the left end, crack height, number of cracks and the magnitude of mass and the velocity of the transit load on the vertical displacements of the cracked simply…
In this work, the orientation and propagation of cracks in fretting fatigue problems is analyzed numerically using the finite element method (FEM) and the extended finite element method (X-FEM). The analysis is performed by means of a 2D…
In this study, a new approach, for identification and characterization of straight cracks in plates-like structures, is presented. The finite element method using a commercial software (Abaqus)is coupled with successful history-based…
A straightforward methodology for modelling the cohesive zone (CZM) of an adhesively bonded joint is developed, by using a commercial finite element code and experimental outcomes from standard fracture tests, without defining a damage law…
Most seismic design codes provide formulas for estimating base shear and lateral loads. To determine lateral loads, the building's fundamental vibration period must be calculated, either theoretically or experimentally. However, there is…
This paper presents a numerical method for non-local stress assessment by means of a general FE tool and the local stress field. Unlike usual calculations by means of a numerical PDE solver, a more general numerical integration is used.…
In this paper Digital Image Correlation (DIC) is used to study the evolution of the plastic zone close to a crack tip. A modified CT-specimen was used in order to fulfill the plane stress condition. The strain field around the crack tip…
New experimental technique for a determination of the stress intensity factor (SIF) and T-stress values is developed and verified. The approach assumes combining the crack compliance method and optical interferometric measurements of local…
Crack propagation in gears is a problem related not only to the life of the components, but also to the concept of failsafe design. Fail safe design means to design a component in order that, if a failure occurs, this may cause a “safe…
In this work, powder compaction process was investigated by using a numerical material model, which involves Mohr-Coulomb theory and an elliptical surface plasticity model. An effective algorithm was developed and implemented in the ANSYS…
Belgrade fair hall 1 is well known for its dome, which is still the world largest self-supported construction made of pre-stressed concrete, with its diameter of 106 m. In this paper the Finite Element Method (FEM) was performed to analyze…
Fully automatic fatigue crack growth simulation system is developed using S-version FEM (SFEM). This system is extended to fracture in heterogeneous material. In the heterogeneous material, crack tip stress field becomes mixed mode…
A fatigue test on a full scale panel with complex loading condition and geometry configuration has been carried out using a triaxial test machine. The demonstrator is made up of two skins which are linked by a transversal butt-joint…
Il lavoro verifica l’applicabilità di un modello semplificato agli elementi finiti per l’analisi a collasso post elastico di strutture incollate complesse in parete sottile. Al fine di superare le limitazioni dei modelli di letteratura…
Tibia is one of the bones that often fracture, generally occurring due to a car accident, falling from high places, work accidents, and sports injuries. Internal fixation is one of the solutions to repair broken bones. In some cases…
This work aims to study the crack propagation in 12%Cr steel for turbine disks. Creep Crack Growth (CCG) tests on CT specimens have been performed to define the proper fracture mechanics which describes the initiation of the crack…
In this paper, the stress intensity factor (SIF) is computed in a circumferentially-cracked round bar (CCRB) subjected to tensile loading, considering that the resistant ligament is circular and exhibits certain eccentricity in relation to…
A quasi-static approach for an interface damage model, incorporating Rayleigh damping for viscoelastic carbon fiber reinforced polymer composites, is introduced. The interface traction-relative displacement behavior is modeled using a thin…
The bonded composite repair has proven to be an effective method for addressing crack damage propagation. Numerous studies have employed experimental and simulation techniques to demonstrate the repair performance through the composites.…
Obiettivo ultimo delle ricerche nelle quali si inquadra questo studio è superare, o almeno limitare, la necessità di complicate e costose prove sperimentali a favore di altri metodi predittivi della vita a fatica. Scopo specifico del…
This study investigates the structural behaviour of elements produced by extrusion-based 3D concrete printing (3DCP). Six full-scale columns with intentional imperfections were tested in three-point bending and subsequently analysed…
Experimental loading and FEM simulation-based approach at macroscale are utilized to investigate the failure mechanisms of Al2O3 ceramics. Experimental characterization of microstructure is carried out using SEM. Recently the microscale…
This paper presents numerical models of a 3D printed plastic joint applicable to the connection of wooden structures. The research presented provides a comparison of two alternative solutions for the geometry of the joint and results from…
The pipes, during their service, are subjected to accumulated loads such as internal pressure and that of the soil. The latter considerably accelerate their damage. In this work, the bending moment stress of API 5L X70 category steel…
Structures subjected to severe loads, such as earthquakes, often develop cracks at the beam-column joints, underscoring the significance of these regions in design. This study focuses on a comparative analysis of beam-column joints…
In this study, the finite element method is used to analyze the effect of corrosion and the behavior of inclined cracks of an aluminum plate Al 2024 -T3 under thermomechanical loading. The effects of the inclination of the crack and the…
With the introduction of new materials and advances in medical science, the endodontic files have changed since the early days of root canal treatments. In the late days, we have seen an increasing use of Nickel-Titanium (NiTi) alloys, to…
Within this work, the causes of collapses and damages occurred in masonry artefacts have been evaluated to properly identify suitable monitoring and restoration methods. In this regard, a comprehensive literature review has been performed.…
In this paper, an analytical and numerical study in FEM finite element by the ABAQUS software was conducted. Which aims to study the behaviour of RC beams bending strengthened with SNSM side near surface mounted technique, proposed as a…
