Fatigue & Fatigue crack growth

All Items

• Functional fatigue of NiTi Shape Memory wires for a range of end loadings and constraints

  G. Scirè Mammano, E. Dragoni

  Pages 14-33

• Gradient approach for the evaluation of the fatigue limit of welded structures under complex loading

  Y. Nadot, D. Halm, F. Dal Cero Coelho

  Pages 220-226

• Gradient-enriched linear-elastic tip stresses to perform the highcycle fatigue assessment of notched plain concrete

  C. Bagni, H. Askes, L. Susmel

  pages 105-110

• Granite stone subjected to ultrasonic fatigue tests under three point bending modality

  Gonzalo Mariano DOMINGUEZ ALMARAZ, Alexiane DOMINGUEZ, Necker J. TRUJILLO ALONSO

  70-76

• Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole

  Masahiro Goto, Kakeru Morita, Junichi Kitamura, Takaei Yamamoto, Masataka Baba, Seung-zeon Han, Sangshik Kim

• Growth of long fatigue cracks under non-proportional loadings – experiment and simulation

  Y. Hos, M. Vormwald

  234-240

• Heat dissipation and fatigue crack kinetic features of titanium alloy Grade 2 after laser shock peening

  Anastasia Iziumova, Aleksei Vshivkov, Aleksandr Prokhorov, Elena Gachegova, Denis Davydov

  516-526

• High cycle torsional fatigue properties of 17-4PH stainless steel

  K. Yanase, B.M. Shönbauer, M. Endo

  101-107

• High magnification crack-tip field characterisation under biaxial conditions

  B. Moreno, P. Lopez-Crespo, J. Zapatero

  Pages 145-152

• High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components

  P. Gallo, F. Berto

• Identification of fatigue and mechanical characteristics of explosively welded steel - titanium composite

  M. Kowalski

  Pages 85-92

• Impacts of nano-clay particles and heat-treating on out-of-phase thermo-mechanical fatigue characteristics in piston aluminum-silicon alloys

  H. Bahmanabadi, Mohammad Azadi, A. Dadashi, J. Torkian, M.S.A. Parast, G. Winter, F. Grün

  224-245

• Implementation of fatigue model for unidirectional laminate based on finite element analysis: theory and practice

  D. Carrella-Payan, B. Magneville, M. Hack, C. Lequesne, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

  Pages 184-190

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  152-165

• In situ 3D characterization of fatigue cracks displacement fields

  Joel Lachambre, Jean-Yves Buffiere, Julien Réthoré, Arnaud Weck

  Pages 50-53

• In situ observation of rolling contact fatigue cracks by laminography using ultrabright synchrotron radiation

  Y. Nakai, D. Shiozawa, S. Kikuchi, K. Sato, T. Obama

• In-service fatigue cracking of the propeller shafts joined by a spline-pinned construction to the engines of AN-24, AN-26, and IL-18 aircrafts

  A. Shanyavskiy, A. Toushentsov

  pages 340-348

• Influence of contact parameters in fretting-fatigue contact 3D problems

  Fella Hamadouche, Habib Benzaama, Mohamed Mokhtari, Miloud Abbes Tahar

  228-240

• Influence of crack micro-roughness on the plasticity-induced fatigue propagation in high strength steel

  J. Toribio, J.C. Matos, B. González

  PAges 62-65

• Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor

  Andrey Yankin, A.I. Mugatarov, V.E. Wildemann

  327-335

• Influence of forging conditions on the fatigue mechanisms of low alloy steels: a 3D study

  Pablo Lorenzino, Jean-Yves Buffiere, Catherine Verdu

  Pages 191-196

• Influence of joint line remnant on crack paths under static and fatigue loadings in friction stir welded Al-Mg-Sc alloy

  Y. Besel, M. Besel, U. Alfaro Mercado, T. Kakiuchi, Y. Uematsu

  pages 295-305

• Influence of local stress concentrations on the crack propagation in complex welded components

  C. Fischer, W. Fricke

• Influence of microstructure on fatigue property of ultra high-strength steels

  Kanji OKUDA, Kazuhiro OGAWA, Yuji ICHIKAWA, Tsuyoshi SHIOZAKI, Naoki YAMAGUCHI

  125-134

• Influence of secondary dendrite arm spacing (SDAS) on the fatigue properties of different conventional automotive aluminum cast alloys

  Sascha Gerbe, Ulrich Krupp, Wilhelm Michels

  105-115

• Influence of static mean stresses on the fatigue behavior of 2024 aluminum alloy under multiaxial loading

  Andrey Yankin, Valerii Wildemann, Nikolai Belonogov, Oleg Staroverov

  151-163

• Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data

  Andrey Chernov, Sviatoslav Eleonsky, Vladimir Pisarev

  174-186

• Influence of temperature and exploitation period on fatigue crack growth parameters in different regions of welded joints

  Ivica Camagic, Nemanja Vasic, Bogdan Cirkovic, Zijah Burzic, Aleksandar Sedmak, Aleksandar Radovic

  Pages 1-7

• Influence of the crack propagation rate in the obtaining opening and closing stress intensity factor by finite element method

  Luiz Carlos H. Ricardo, Carlos Alexandre J. Miranda

  Pages 201-214

• Influence of the interphase between laser-cladded metal layer and steel substrate on fatigue propagation of a short edge crack

  Lucie Malikova, Pavel Doubek, Petr Miarka, Stanislav Seitl

  514-524

• Influence of the stress gradient on the fatigue life calculation of a martensitic high strength steel

  Igor Miloševic, Gerhard Winter, Florian Grün, Martin Kober

  Pages 1-8

• Influence of themo-mechanical treatments and microstructural state on the fatigue behaviour of a weald seam: case of API X60 steel

  Mohammed Achoui , Fethi Sebaa, Benattou Bouchouicha

  365-375

• Influence of vacuum carburizing treatment on fatigue crack growth characteristic in DSG2

  K. Nambu, N. Egami

• Initial orientation of the fretting fatigue cracks in shrink-fit connection specimens

  Ciro Santus

  442-450

• Initiation and growth behavior of very-long microstructurally short fatigue cracks

  P. Lorenzino, A. Navarro

  Pages 138-144

• Integrity and life estimation of turbine runner cover in a hydro power plant

  A. Sedmak, S. Bosnjak, M. Arsic, S.A. Sedmak, Z. Savic

  Pages 63-68

• Inter-laminar shear stress in hybrid CFRP/austenitic steel

  J. Lopes, M. Freitas, D. Stefaniak, P.P. Camanho

  pages 67-79

• Interaction of shear and normal stresses in multiaxial fatigue damage analysis

  Nicholas R. Gates, Ali Fatemi

  160-165

• Investigation fatigue crack initiation and propagation cruciform welded joints by extended finite element method (XFEM) and implementation SED approach

  Hamza Djeloud, Mustafa Moussaoui, Ahmed Kellai, Dahmane Hachi, Filippo Berto, Benattou Bouchouicha, Brahim Elkhalil Hachi

  346-362

• Investigation of crack paths in natural fibre-reinforced composites

  S. Keck, M. Fulland

• Investigation of the effect of impact load on concrete-filled steel tube columns under fire

  Ali Golsoorat Pahlaviani, Ali Mohammad Rousta, Peyman Beiranvand

  317-324

• Investigation on fracture processes of concrete

  Sonali Bhowmik, Sandeep Dubey, Sonalisa Ray

  419-428

• Investigation on parametric representation of proportional and nonproportional multiaxial fatigue responses

  J. Albinmousa

  94-100

• Isothermal and thermomechanical fatigue interaction in fatigue crack propagation behavior of a low-carbon nitrogen-controlled 316 stainless steel

  Yasuhiro Yamazaki

  26-33

• J-integral evaluation and structural integrity assessment using FAD for SA 312 Type 304 LN steel welded pipes with notch under monotonic loading

  V. Thondamon, A. Ramachandra Murthy, S. Vishnuvardhan

  88-103

• Kinetics of fatigue crack growth and crack paths in the old puddled steel after 100-years operating time

  G. Lesiuk, M. Szata

• Life estimation by varying the critical plane orientation in the modified Carpinteri-Spagnoli criterion

  Camilla Ronchei, Andrea Carpinteri, Giovanni Fortese, Andrea Spagnoli, Sabrina Vantadori, Marta Kurek, Tadeusz ?agoda

• Load history effects on fatigue crack propagation: Its effect on the R-curve for threshold

  X. Zhou, A. Hohenwarter, T. Leitner, H.P. Gänser, R. Pippan

  pages 209-214

• Local approaches for the fracture assessment of notched components: the research work developed by Professor Paolo Lazzarin

  F. Berto

• Low cycle fatigue damage model and sensitivity analysis of fatigue crack initiation by finite element approach

  Zhiqiang Wang, Xiaoguang Huang, Dian-hao Zhang

  81-91