Fatigue & Fatigue crack growth

All Items

• Couple effects of temperature and fatigue, creep-fatigue interaction and thermo-mechanical loading conditions on crack growth rate of nickel-based alloy

  Valery Shlyannikov, Aleksandr Inozemtsev, Aleksey Ratchiev

  46-58

• Crack detection in beam-like structures by nonlinear harmonic identification

  Paolo Casini, Fabrizio Vestroni, Oliviero Giannini

  pages 313-324

• Crack front segmentation under combined mode I- and mode IIIloading

  A. Eberlein, H. A. Richard

  1-7

• Crack growth based life prediction approach under LCF-HCF interaction

  Aritra Sarkar, M. Okazaki, A. Nagesha, R. Sandhya

  86-97

• Crack growth behavior of aluminum alloy 6061 T651 under uniaxial and biaxial planar testing condition

  S. Henkel, E. Liebelt, H. Biermann, S. Ackermann

• Crack growth of explosive welding zirconium-steel bimetal subjected to cyclic bending

  D. Rozumek, Z. Marciniak

  Pages 40-45

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  299-309

• Crack growth simulation in heterogeneous material by S-FEM and comparison with experiments

  Masanori Kikuchi, Yoshitaka Wada, Yulong Li

• Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy

  Salmi abdallah, Mohamed Elajrami, Mohamed El-Amine Slimani

  231-241

• Crack growth threshold under hold time conditions in DA Inconel 718 – A transition in the crack growth mechanism

  E. Fessler, S. Pierret, E. Andrieu, V. Bonnand

  pages 223-231

• Crack initiation and early propagation plane orientation of 2A12-T4 aluminum alloy under tension-torsion fatigue loading including mean tensile stress

  Shi Xinhong, Zhang Jianyu, Xiao Qingshan, Liu Tianqi

  pages 441-448

• Crack initiation and propagation on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing

  G. M. Domínguez Almaraz, E. Correa Gómez, J.C. Verduzco Juárez, J.L. Avila Ambriz

• Crack initiation and propagation paths in small diameter FSW 6082-T6 aluminium tubes under fatigue loading

  Roberto Tovo, Luca Susmel, M. Neil James, Danie G. Hattingh, Enrico Maggiolini

  Pages 119-129

• Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach

  Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto, Keisuke Tanaka

  Pages 8-15

• Crack path simulation for cylindrical contact under fretting conditions

  R.A. Cardoso, J.A. Araújo, J.L.A. Ferreira, F.C. Castro

  pages 405-413

• Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation

  Daniele Rigon, Filippo Berto, Giovanni Meneghetti

  525-536

• Crack paths in smooth and precracked specimens subjected to multiaxial cyclic stressing

  Nicholas R. Gates, Ali Fatemi

• Crack Propagation by Finite Element Method

  Luiz Carlos H. Ricardo

  Pages 57-78

• Crack simulation models in variable amplitude loading - a review

  Luiz Carlos H. Ricardo, Carlos Alexandre J. Miranda

  pages 456-471

• Crack tip fields in elastic-plastic and mixed mode I+II+III conditions, finite elements simulations and modeling

  F. Fremy, S. Pommier, E. Galenne, S. Courtin

  pages 397-403

• Crack tip strain evolution and crack closure during overload of a growing fatigue crack

  De-Qiang Wang, Ming-Liang Zhu, Fu-Zhen Xuan

  Pages 143-148

• Creep-fatigue life evaluation of high chromium ferritic steel under non-proportional loading

  T. Morishita, Y. Murakami, T. Itoh, H. Tanigawa

  Pages 281-288

• Critical crack path assessments in failure investigations

  Robert D. Caligiuri

• Critical length parameter of HDPE and its use in fatigue lifetime predictions

  Kamila Kozáková, Lukáš Trávníček, Jan Poduška, Jan Klusák

  211-222

• Critical plane approach to multiaxial variable amplitude fatigue loading

  Yingyu Wang, Luca Susmel

  pages 345-356

• Cruciform specimens used for determination of the influence of T-stress on fatigue crack growth with overloads on aluminum alloy Al 6061 T651

  Sebastian Henkel, Carl H. Wolf, Horst Biermann, Andreas Burgold, Meinhard Kuna

  135-143

• Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method

  Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev

  115-128

• Damage evaluation under complex fatigue loading conditions

  Luis Reis, Joao Caxias, Henrique Soares, Pedro R. Costa, Vitor Anes, Manuel Freitas

  318-331

• Damage localization of closing cracks using a signal decomposition technique

  J. Prawin, Rama Mohan Rao A

  513-522

• Damage of additively manufactured polymer materials: experimental and probabilistic analysis

  Taoufik Hachimi, Fouad Ait Hmazi, Fatima Majid

  236-255

• Deep Learning algorithm for the assessment of the first damage initiation monitoring the energy release of materials

  Dario Milone, Dario Santonocito

  505-515

• Definition of the linearity loss of the surface temperature in static tensile tests

  A. Risitano, G. Fargione, E. Guglielmino

  pages 201-210

• Deformation and fatigue behaviors of carburized automotive gear steel and predictions

  Bonglae Jo, Yongbo Shim, Shahriar Sharifimehr, Ali Fatemi

  28-37

• Degenerated graphite nodules influence on fatigue crack paths in a ferritic ductile cast iron

  Francesco Iacoviello, Vittorio Di Cocco

• Design optimization of cruciform specimens for biaxial fatigue loading

  R. Baptista, R. A. Claudio, L. Reis, I. Guelho, M. Freitas, J. F. A. Madeira

  pages 118-126

• Designing aluminium friction stir welded joints against multiaxial fatigue

  L. Susmel, D. G. Hattingh, M. N. James, E. Maggiolini, R. Tovo

  207-214

• Detection of Uniaxial Fatigue Stress under Magnetic Flux Leakage Signals using Morlet Wavelet

  Syed Muhamad Firdaus, Azli Arifin, Shahrum Abdullah, Salvinder Singh Karam Singh, Noorsuhada Md Nor

  254-265

• Determination of dissipated Energy in Fatigue Crack Propagation Experiments with Lock-In Thermography

  Jürgen Bär, Ralf Urbanek

  563-570

• Determination of Stress Intensity Factors and J integral based on Digital Image Correlation

  Eric Breitbarth, Tobias Strohmann, Michael Besel, Stefan Reh

  12-25

• Determination of the critical plane orientation depending on the fatigue curves for bending and torsion

  Marta Kurek, Tadeusz ?agoda

  Pages 24-30

• Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading

  Sandip Suman, Alan Kallmeyer, John Smith

  Pages 224-230

• Durability method on corrosion fatigue performance of AH 32 steel

  xiaoguang huang, zhiqiang wang

  481-490

• Dynamic additional loads influencing the fatigue life of gears in an electric vehicle transmission

  G. Belingardi, V. Cuffaro, F. Curà

  pages 469-477

• EBSD-assisted fractographic analysis of crack paths in magnesium alloy

  S. Takaya, Y. Uematsu, T. Kakiuchi

• Effect of Additive Elements Bi/Ni/Ge on Crack Initiation and Propagation for Low-Ag Solders

  Noritake Hiyoshi, Mitsuo Yamashita, Hiroaki Hokazono

  25-33

• Effect of cold expansion on improving of fatigue initiation life in Aluminium alloy

  Mohamed El Habiri, Mustapha Benachour, Nadjia Benachour

  34-44

• Effect of contact geometry, loading, material properties and relative slip on the fretting fatigue behaviour of metallic components

  Andrea Zanichelli, Andrea Carpinteri, Camilla Ronchei, Daniela Scorza

  225-235

• Effect of corrosion and fatigue on the remaining life of structures and its implication to additive manufacturing

  Filippo Berto, Javad Razavi, Rhys Jones, D. Peng

  33-44

• Effect of crack propagation on crack tip fields

  F.V. Antunes, A.G. Chegini, L.M. Correia, A.L. Ramalho

  Pages 54-60

• Effect of defect length on rolling contact fatigue crack propagation in high strength steel

  T. Makino, Y. Neishi, D. Shiozawa, Y. Neishi, D. Shiozawa, S. Kikuchi, S. Okada, K. Kajiwara, Y. Nakai