Composites

All Items

• Fatigue strength evaluation of PPGF35 by energy approach during mechanical tests

  Giacomo Risitano

  537-548

• Finite element analysis of the behavior of bonded composite patches repair in aircraft structures

  Islam El-Sagheer, Mai Taimour, Mariam Mobtasem, Amr Abd-Elhady , Hossam El-Din M. Sallam

  128-138

• Finite Element Analysis of the thermo-Mechanical Behavior of composite Pipe Elbows under Bending and Pressure loading

  Elamine Abdelouahed, M. Mokhtari, H. Benzaama

  698-713

• Finite element analysis of the thermomechanical behavior of metal matrix composites (MMC)

  Zaoui Bouchra, Baghdadi Mohammed, Boualem Serier, Mohammed Belhouari

  174-188

• Flexural behaviour of reinforced concrete beams strengthened by NSM technique using ECC

  Fady Awad, Mohamed Husain, Khaled Fawzy

  291-309

• Flexural testing and analysis of full-strain-fields in sandwich composites

  Rosa Marat-Mendes, Ricardo Martins, Alexandre Garcia, Luis Reis

  568-585

• Forced Vibration Analysis of Laminated Composite Plates under the Action of a Moving Vehicle

  Hossein Abbaszadeh Mobaraki, Ramazan-Ali Jafari-Talookolaei, Paolo S. Valvo, Reza Haghani Dogaheh

  198-211

• Fractography and Tensile studies on the effect of different carbon fillers reinforced hybrid nanocomposites

  Balachandra P. Shetty, G. J. Naveen

  220-232

• Fracture analysis of AA6061-graphite composite for the application of helicopter rotor blade

  Saleemsab Doddamani, Chao Wang, M. Sheik Mohamed Jinnah, Md. Arefin Kowser

  191-201

• Fracture micrographic analysis of a carbon FML under three-point bending load

  Costanzo Bellini, Vittorio Di Cocco, Francesco Iacoviello, Larisa Patricia Mocanu

  410-418

• Fracture toughness and failure mechanism of high performance concrete incorporating carbon nanotubes

  Anwar Khitab, Sajjad Ahmad, Rao Arsalan Khushnood, Syed Ali Rizwan, Giuseppe Andrea Ferro, Luciana Restuccia, Mustajab Ali, Imran Mehmood

  Pages 238-248

• Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens

  Saleemsab Doddamani, Mohamed Kaleemulla

  Pages 484-490

• Glass Fiber for Improved Behavior of Light Expanded Clay Aggregate Concrete Beams: An Experimental Study

  Louay Aboul Nour , Mariam Gamal, Amr Ghoniem

  1-16

• Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using FPB specimen

  Abilash Desai, C. M. Sharanaprabhu, S. K. Kudari

  426-433

• Graphene Oxide on the Microstructure and Mechanical Properties of Cement Based Composite Material

  Jinchang Pang, Wang Yeming

  156-163

• Impact of hybrid nanoparticle reinforcements on Mechanical properties of Epoxy-Polylactic Acid (PLA) Composites Impact of hybrid nanoparticle reinforcements on Mechanical properties of Epoxy-Polylactic Acid (PLA) Composites

  M. A. Umarfarooq, K. Dileep, A. Srinath, N.R. Banapurmath, Ashok M. Sajjan

  91-104

• The Impact of nanoparticles (B4C-Al2O3) on mechanical, wear, fracture behavior and machining properties of formwork grade Al7075 composites

  T. B. Prakash, M. Gangadharappa, Santhosh Somashekar, M. Ravikumar

  210-226

• Impact response of balsa core sandwiches

  Nurdane Mortas, Paulo N.B. Reis, José A.M. Ferreira

  pages 403-408

• Impact response of laminated cylindrical shells

  Carlos Alexandre Campos Pais Coelho, Fábio V.P. Navalho, P.N.B. Reis

  411-418

• Implementation of fatigue model for unidirectional laminate based on finite element analysis: theory and practice

  D. Carrella-Payan, B. Magneville, M. Hack, C. Lequesne, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

  Pages 184-190

• Improvement of performance of ultra-high performance concrete based composite material added with nano materials

  Pang Jinchang, Liu Ronggui

  Pages 130-138

• Improvements in self-consolidating cementitious composites by using micro carbonized aggregates

  Giuseppe Andrea Ferro, Sajjad Ahmad, Rao Arsalan Khushnood, Luciana Restuccia, Jean Marc Tulliani

  pages 75-83

• Indentation Fracture Toughness of Aluminium-Graphite Composites: Influence of Nano-particles

  Ibrahim Alqahtani, B. Niyaz Ahmed, E. Ashoka, A. M. Rajesh, P. B. Bharath, Doddamani Saleemsab

  11-21

• Inelastic deformation and destruction of fiber-laminated polymer composites in stress concentration zones

  Elena Strungar, Valery Wildemann

  406-416

• Influence of boundary conditions on the response of multilayered plates with cohesive interfaces and delaminations using a homogenized approach

  R. Massabò

  pages 230-240

• Influence of contact interaction character on residual stresses arising over damaged area in composite plate

  Sviatoslav Eleonsky, Vladimir Pisarev, Yury Matvienko, Galina Gvozdeva

  108-130

• Influence of hBN and MoS2 fillers on toughness and thermal stability of carbon fabric-epoxy composites

  Mr. Yermal Shriraj Rao, Dr. B. Shivamurthy, Dr. Nanjangud Subbarao Mohan, Dr. Nagaraja Shetty

  240-260

• Influence of hybrid nano Al2O3–ZrO2 reinforcements on microstructure, fracture toughness and fractographic behaviour of Al6061 alloy

  Annapoorna Krishnappa, Shobha Ramesh, Rajanna Siddagangappa, Srimadhu Ashokkumar, Manjunath Vatnalmath , Virupaxi Auradi, Madeva Nagaral

  223-237

• Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP

  Dmitriy Lobanov, Stanislav Slovikov, Ekaterina Lunegova

  74-87

• Influence of limestone dust and natural pozzolan on engineering properties of self-compacting repair mortars

  Mohamed Ghrici, Said Choucha, Mohamed Ghrici, Ahmed Omran

  135-146

• Influence of manufacturing shrinkage and microstructural features on the strength properties of carbon fibers/PEEK composite material

  Evgeny Lomakin, Boris Fedulov, Alexey Fedorenko

  527-540

• Influence of material inhomogeneity and non-linear mechanical behavior of the material on delamination in multilayered beams

  Victor Rizov

  468-481

• Influence of Oxidation on Fracture Toughness of Carbon-Carbon Composites for High-Temperature Applications

  Sunil Kumar B.V., Neelakantha V. Londe, M. Lokesha, S.N. Vasantha Kumar, A.O. Surendranathan

  105-113

• Influence of Quenching Agents on Mechanical, Wear, and Fracture Characteristics of Al2O3 / MoS2 Reinforced Al-6061 Hybrid Metal Matrix Composite (MMCs)

  K. R. Suchendra, M. Sreenivasa Reddy; M. Ravikumar

  122-133

• Influence of Silicon Nanosheet (SiNS) on the Toughness of Biphasic Calcium Phosphate (BCP) Composites

  Anwer Al-Obaidi, Hussein Dalfi, Nazar Abdulridha, Amer Alomarah

  137-147

• Influence of the applied layer on the state of stress in a bimetallic perforated plate under two load variants

  Mateusz Konieczny, Grzegorz Gasiak, Henryk Achtelik

  137-150

• Inter-laminar shear stress in hybrid CFRP/austenitic steel

  J. Lopes, M. Freitas, D. Stefaniak, P.P. Camanho

  pages 67-79

• Interfacial shear strength of carbon nanotubes based hybrid composites: effect of loading rate

  Harpreet Singh Singh Bedi, Beant Kaur Billing, Prabhat K Agnihotri

  571-576

• Interlaminar fracture in woven carbon/epoxy laminates

  Paulo N.B. Reis, José A.M. Ferreira, José D.M. Costa, António M. Pereira

  pages 431-438

• Interlaminar shear strength study on CFRP/Al hybrid laminates with different properties

  Costanzo Bellini, Vittorio Di Cocco, Luca Sorrentino

  442-448

• Interleaving Carbon-Glass Veil in Glass Epoxy Composite for Improved Mode-I Fracture Toughness – A Hybrid Approach

  Vinayak S. Uppin, P.S.Shivakumar Gouda, I.Sridhar, M. A. Umarfarooq, Aravind Muddebihal , Abhilash Edacherian

  127-139

• Investigating the contribution of geometrical parameters and immersion time on fracture toughness of jute fabric composites using statistical techniques

  Dr. Bharath K N, G. B. Manjunatha

  14-24

• Investigation of crack paths in natural fibre-reinforced composites

  S. Keck, M. Fulland

• Investigation of Impact Energy Absorption of AA6061 and Composites: Role of Post-Aging Cooling Methods

  G.V. Krishna Reddy, B. K. Naveen Kumar, G. Hareesha, A. M. Rajesh, Saleemsab Doddamani

  261-272

• Investigation of the effect of impact load on concrete-filled steel tube columns under fire

  Ali Golsoorat Pahlaviani, Ali Mohammad Rousta, Peyman Beiranvand

  317-324

• Investigation of the Effect of Yarn Waste Fibers and Cocamide Diethanolamide Chemical on the Strength of Hot Mix Asphalt

  Mehmet Saltan, Gizem Kaçaroğlu, Öznur Karadağ

  54-63

• Investigation on influence of SiCp on three-body abrasive wear behaviour of glass/epoxy composites

  Ajith Joshi, S. Basavarajappa, S. Ellangovan, B.M Jayakumar

  65-73

• Investigation on Microstructure and Tensile Fractography of RE Oxides (CeO2/Y2O3) Reinforced AZ91D Magnesium Matrix Composites

  Santhosh Gotagunaki, Vardhaman S. Mudakappanavar, R. Suresh

  100-109

• Investigation on Microstructure, Hardness, Wear behavior and Fracture Surface Analysis of Strontium (Sr) and Calcium (Ca) Content A357 Modified Alloy by Statistical Technique

  K. Ganesh, K. Hemachandra Reddy, S. Sudhakar Babu, R Suresh

  32-46

• Investigation on the tensile strength, hardness and wear properties in n-B4C reinforced Al7075 composites

  Ravikumar

  219-235