Abstract
The present contribution reviews a recently proposed method to rapidly estimate the averaged SED at the tip of short as well as long cracks under in-plane I+II and long cracks under out-of-plane I+III mixed mode loadings. Short cracks are distinguished from long cracks by considering that the stress fields within the control volume of short cracks are no longer governed solely by the stress intensity factors (SIFs), but the contribution of higher order terms, and primarily the T-stress, becomes significant to estimate the averaged SED. According to the proposed method, the averaged SED is calculated using the linear elastic nodal stresses evaluated by FEM either at the crack tip, to account for the SIFs contribution, and at selected FE nodes of the crack free edges, to include the T-stress contribution. The advantage of the proposed approach is two-fold: coarse FE meshes can be adopted; moreover, geometrical modelling the control volume is no longer necessary. To validate the approach, cracked plates subjected to in-plane I+II mixed mode loading as well as bars weakened by circumferential outer cracks subjected to out-of-plane mixed mode I+III loading have been analysed. A comparison between approximate values of the averaged SED according to the nodal stress approach and those derived directly from the FE strain energy adopting very refined FE meshes has been successfully performed.
Keywords
Article history
- ReceivedUntil the next stage: 6 days
- AcceptedUntil the next stage: 31 days
- Published
About the authors
Alberto Campagnolo
Assistant Professor
Department of Industrial Engineering
University of Padova
Via Venezia, 1
35131 Padova
Italy
How to cite
APA
IEEE
MLA
Chicago
Harvard
Vancouver
BibTeX
RIS
Licence
Copyright © 2019 Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.
Similar articles
Most read articles by the same author(s)
- xiaoping zhou, Xiaocheng Huang, Filippo Berto, An innovative micromechanics-based three-dimensional long-term strength criterion for fracture assessment of rock materials , Fracture and Structural Integrity: Vol 12 No 44 (2018): April 2018
- Paolo Ferro, Alberto Fabrizi, Franco Bonollo, Filippo Berto, Microstructural and mechanical characterization of a stainless-steel wire mesh–reinforced Al-matrix composite: Bimatallic components for lightweight design , Fracture and Structural Integrity: Vol 15 No 55 (2021): January 2021
- Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto, Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019
- Daniele Rigon, Filippo Berto, Giovanni Meneghetti, Crack paths in multiaxial fatigue of C45 steel specimens and correlation of lifetime with the thermal energy dissipation , Fracture and Structural Integrity: Vol 16 No 59 (2022): January 2022
- Paolo Zuliani, Carlo Boursier Niutta, Davide Salvatore Paolino, Filippo Berto, Andrea Tridello, Very High Cycle Fatigue (VHCF) of notched specimens: a review , Fracture and Structural Integrity: Vol 19 No 74 (2025): October 2025
- Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto, Influence of Notch Sensitivity and Crack Initiation Site on Low Cycle Fatigue Life of Notched Components under Multiaxial Non-proportional Loading , Fracture and Structural Integrity: Vol 13 No 47 (2019): January 2019
- Luigi Viespoli, Filippo Berto, Aurelio Somà, Fatigue life assessment for a welded detail: advantages of a local energetic approach and experimental validation , Fracture and Structural Integrity: Vol 12 No 45 (2018): July 2018
- Hao Bai, Wei Du, Yundong Shou, Lichuan Chen, Filippo Berto, Experimental investigation of cracking behaviors of ductile and brittle rock-like materials , Fracture and Structural Integrity: Vol 15 No 56 (2021): April 2021
- Zheng Li, Yundong Shou, Deping Guo, Filippo Berto, A coupled elastoplastic damage model for brittle rocks: elastoplastic damage model for brittle rocks , Fracture and Structural Integrity: Vol 14 No 53 (2020): July 2020
- Yi Sun, Liping Yan, Benyong Chen, Wei Song, Filippo Berto, Localized wrinkling of metal films on elastic and liquid substrates , Fracture and Structural Integrity: Vol 13 No 48 (2019): April 2019