Search | Fracture and Structural Integrity

Miscellanea Views: 1,236 Downloads: 518 Vol. 10, No. 35 (2016) December 29, 2015 pp. pages 11-20

Relation between the plastic instability and fracture of tensile tested Cu-Sn alloys investigated with the application of acoustic emission technique

W. Ozgowicz, B. Grzegorczyk, A. Pawelek, W. Wajda, W. Skuza, A. Piatkowski, Z. Ranachowski

The work concerns the application of the acoustic emission (AE) method in testing the mechanical properties of continuously cast industrial tin bronze CuSn6P, which reveals tendencies to instable plastic flow connected particularly with…

10.3221/IGF-ESIS.35.02

Details: Relation between the plastic instability and fracture of tensile tested Cu-Sn alloys investigated with the application of acoustic emission technique PDF

PDF

Miscellanea Views: 897 Downloads: 532 Vol. 11, No. 41 (2017) June 28, 2017 pp. Pages 339-349

Research on differences and correlation between tensile, compression and flexural moduli of cement stabilized macadam

Yi Yang, Jianlong Zheng, Songtao Lu

In order to reveal the differences and conversion relations between the tensile, compressive and flexural moduli of cement stabilized macadam, in this paper, we develop a new test method for measuring three moduli simultaneously. By using…

10.3221/IGF-ESIS.41.45

Details: Research on differences and correlation between tensile, compression and flexural moduli of cement stabilized macadam PDF

PDF

Miscellanea Views: 949 Downloads: 398 Vol. 9, No. 31 (2015) December 17, 2014 pp. pages 1-12

Advanced techniques for estimation of the tensile fracture toughness of adhesive joints

R.D.S.G. Campilho, M.D. Banea, L.F.M. da Silva

Adhesive bonding has become more efficient in the last few decades due to the adhesives developments, granting higher strength and ductility. As a result, adhesives are being increasingly used in industries such as the automotive…

10.3221/IGF-ESIS.31.01

Details: Advanced techniques for estimation of the tensile fracture toughness of adhesive joints PDF

PDF

Miscellanea Views: 1,295 Downloads: 477 Vol. 10, No. 35 (2016) December 29, 2015 pp. pages 21-30

Mechanisms of plastic instability and fracture of compressed and tensile tested Mg-Li alloys investigated using the acoustic emission method

A. Pawelek, A. Piatkowski, W. Wajda, W. Skuza, A. Tarasek, W. Ozgowicz, B Grzegorczyk, Z. Ranachowski, S. Kúdela Jr, S. Kúdela

The results of the investigation of both mechanical and acoustic emission (AE) behaviors of Mg4Li5Al alloy subjected to compression and tensile tests at room temperature are compared with the test results obtained using the same alloy and…

10.3221/IGF-ESIS.35.03

Details: Mechanisms of plastic instability and fracture of compressed and tensile tested Mg-Li alloys investigated using the acoustic emission method PDF

PDF

Miscellanea Views: 1,174 Downloads: 685 Vol. 9, No. 31 (2015) December 17, 2014 pp. pages 38-53

The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

A. Abrishambaf, V.M.C.F. Cunha, J.A.O. Barros

Adding fibres to concrete provides several advantages, especially in terms of controlling the crack opening width and propagation after the cracking onset. However, distribution and orientation of the fibres toward the active crack plane…

10.3221/IGF-ESIS.31.04

Details: The influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete PDF

PDF

Miscellanea Views: 1,307 Downloads: 582 Vol. 8, No. 30 (2014) September 8, 2014 pp. pages 349-359

Modification of creep and low cycle fatigue behaviour induced by welding

A. Carofalo, V. Dattoma, R. Nobile, F.W. Panella, G. Alfeo, A. Scialpi, G.P. Zanon

In this work, the mechanical properties of Waspaloy superalloy have been evaluated in case of welded repaired material and compared to base material. Test program considered flat specimens on base and TIG welded material subjected to…

10.3221/IGF-ESIS.30.42

Details: Modification of creep and low cycle fatigue behaviour induced by welding PDF

PDF

Miscellanea Views: 1,519 Downloads: 649 Vol. 8, No. 30 (2014) September 9, 2014 pp. pages 424-430

Role of the microstructure on the mechanical properties of fully pearlitic eutectoid steels

J. Toribio, B. González, J.C. Matos, F.J. Ayaso

This paper analyses how the microstructure of an eutectoid pearlitic steel affects its conventional mechanical properties (obtained by means of a standard tension test) and the associated micromechanisms of fracture. Results show how the…

10.3221/IGF-ESIS.30.51

Details: Role of the microstructure on the mechanical properties of fully pearlitic eutectoid steels PDF

PDF

Miscellanea Views: 962 Downloads: 580 Vol. 11, No. 39 (2017) December 15, 2016 pp. Pages 201-215

Fatigue assessment by energy approach during tensile tests on AISI 304 steel

A. Risitano, D. Corallo, E. Guglielmino, G. Risitano, L. Scappaticci

Estimation of the fatigue limit for steel ductile materials using non-destructive methods is a topic of great interest to researchers today. In recent years, the method adopted has implemented infrared sensors to detect the surface…

10.3221/IGF-ESIS.39.20

Details: Fatigue assessment by energy approach during tensile tests on AISI 304 steel PDF

PDF

Integrity of materials and structures Views: 436 Downloads: 226 Vol. 19, No. 74 (2025) August 10, 2025 pp. 89-114

Experimental Investigation of Tensile and Bond Strength for a GFRP–SSWM Hybrid Wraps

Vipul Kalyani, Digesh Joshi, Paresh Patel

This study experimentally investigates the tensile and bond performance of novel GFRP–SSWM hybrid wraps developed using two epoxy adhesives - Sikadur 30 LP and Sikadur 330. A total of 42 coupon specimens for tensile testing and 48 dumbbell…

10.3221/IGF-ESIS.74.07

Details: Experimental Investigation of Tensile and Bond Strength for a GFRP–SSWM Hybrid Wraps HTML PDF Visual Abstract

Other formats

HTML PDF Visual Abstract Podcast

Miscellanea Views: 1,692 Downloads: 513 Vol. 9, No. 34 (2015) September 29, 2015

Biaxial fatigue behavior of a powder metallurgical TRIP steel

S. Ackermann, T. Lippmann, D. Kulawinski, S. Henkel, H. Biermann

Multiaxial fatigue behavior is an important topic in critical structural components. In the present study the biaxial-planar fatigue behavior of a powder metallurgical TRIP steel (Transformation Induced Plasticity) was studied by taking…

10.3221/IGF-ESIS.34.64

Details: Biaxial fatigue behavior of a powder metallurgical TRIP steel PDF

PDF

Fractography and Advanced metallography Views: 1,072 Downloads: 913 Vol. 16, No. 61 (2022) June 19, 2022 pp. 338-351

Evaluation of Tensile properties of FRP Composite Laminates under Varying Strain Rates and Temperatures

Prahlad Joshi, Sk Panigrahi

The present investigation deals with the characterization of tensile behavior of various Fiber Reinforced Polymer composites under Thermo-Mechanical loading. Five different types of Uni-Directional (UD) composites of Carbon, Glass…

10.3221/IGF-ESIS.61.23

Details: Evaluation of Tensile properties of FRP Composite Laminates under Varying Strain Rates and Temperatures PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 685 Downloads: 521 Vol. 6, No. 20 (2012) March 19, 2012 pp. 32-35

Case studies in numerical simulation of crack trajectories in brittle materials

H. Jasarevic, S. Gagula

Statistical Fracture Mechanics, formalism of few natural ideas is applied to simulation of cracktrajectories in brittle material. The “diffusion approximation” of the crack diffusion model represents cracktrajectories as a one-dimensional…

10.3221/IGF-ESIS.20.04

Details: Case studies in numerical simulation of crack trajectories in brittle materials PDF

PDF

Miscellanea Views: 1,028 Downloads: 558 Vol. 10, No. 38 (2016) October 3, 2016 pp. Pages 36-46

Prediction of the critical stress to crack initiation associated to the investigation of fatigue small crack

D. Marhabi, N. Benseddiq, G. Mesmacque, Z. Azari, J.M. Nianga

Fatigue design is of vital importance to avoid fatigue small crack growth in engineering structures. This study shows that the critical fatigue design stress can be defined below the usual endurance limit, considered in rules and codes.…

10.3221/IGF-ESIS.38.05

Details: Prediction of the critical stress to crack initiation associated to the investigation of fatigue small crack PDF

PDF

Integrity of materials and structures Views: 929 Downloads: 550 Vol. 19, No. 71 (2025) December 13, 2024 pp. 330-340

Development and mechanical characterization of eggshell bio-filler based hybrid composites

Afroz Khan, B. K. Naveen Kumar, K. J. Anand, E. Ashoka, G. Hareesha

Hybridization of natural fiber composite by incorporating waste- derived fillers has been identified as a promising sustainable technique to develop environmentally friendly and economical composites with enhanced mechanical properties.…

10.3221/IGF-ESIS.71.24

Details: Development and mechanical characterization of eggshell bio-filler based hybrid composites PDF HTML Visual Abstract

PDF HTML Visual Abstract

Environmentally Assisted Fracture Views: 852 Downloads: 526 Vol. 16, No. 62 (2022) September 22, 2022 pp. 64-74

Corrosion behavior of Shape Memory Alloy in NaCl environment and recovery maintenance in Cu-Zn-Al sysytem

Andrea Brotzu, Barbara De Filippo, Stefano Natali, Laura Zortea

Shape memory effect (SME) and the relation with corrosion behavior of Cu-Zn-Al Smart Memory Alloys (SMAs) were investigated using different techniques: Scanning Electron Microscopy equipped with an Energy Dispersive System, X-Ray…

10.3221/IGF-ESIS.62.05

Details: Corrosion behavior of Shape Memory Alloy in NaCl environment and recovery maintenance in Cu-Zn-Al sysytem PDF Visual Abstract

PDF Visual Abstract

Fractography and Advanced metallography Views: 721 Downloads: 1,282 Vol. 17, No. 66 (2023) September 27, 2023 pp. 38-55

Characterization of the mechanical properties and microstructural evolution of martensitic steel in repeated tempering cycles

Amitkumar Shelar, B. P. Ronge

The purpose of this study was to understand the behavior of martensitic H13 steel in accordance with the microstructural evolution, mechanical properties and wear in repeated tempering cycles. The microstructures were characterized by axio…

10.3221/IGF-ESIS.66.03

Details: Characterization of the mechanical properties and microstructural evolution of martensitic steel in repeated tempering cycles PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 1,538 Downloads: 476 Vol. 9, No. 34 (2015) September 28, 2015

Effect of defect length on rolling contact fatigue crack propagation in high strength steel

T. Makino, Y. Neishi, D. Shiozawa, Y. Neishi, D. Shiozawa, S. Kikuchi, S. Okada, K. Kajiwara, Y. Nakai

The objective of the present paper is to clarify the effect of defect length in depth direction on rolling contact fatigue (RCF) crack propagation in high strength steel. RCF test and synchrotron radiation micro computed tomography (SR…

10.3221/IGF-ESIS.34.36

Details: Effect of defect length on rolling contact fatigue crack propagation in high strength steel PDF

PDF

Miscellanea Views: 786 Downloads: 621 Vol. 5, No. 18 (2011) pp. pages 14-22

Fatigue behaviour of titanium dental endosseous implants

Ferdinando Felli, Daniela Pilone, Alessandro Scicutelli

In this work two different titanium dental implants are analyzed in order to evaluate their mechanical strength. An ad-hoc designed experimental apparatus is prepared to test against fatigue these implants in a way that approximates as…

10.3221/IGF-ESIS.18.02

Details: Fatigue behaviour of titanium dental endosseous implants PDF

PDF

Miscellanea Views: 908 Downloads: 521 Vol. 10, No. 35 (2016) December 29, 2015 pp. pages 434-440

Analysis of cracking of low-alloy copper stretched at elevated temperature

Wojciech Ozgowicz, Elzbieta Kalinowska-Ozgowicz, Klaudiusz Lenik, Aneta Duda

This paper presents both mechanical and structural aspects of micro-cracking of CuNi2Si copper alloy in CNCS grade revealed during the static tensile test in the temperature range between 20ºC and 800ºC. The purpose of this paper is to…

10.3221/IGF-ESIS.35.49

Details: Analysis of cracking of low-alloy copper stretched at elevated temperature PDF

PDF

Miscellanea Views: 1,025 Downloads: 642 Vol. 11, No. 41 (2017) June 28, 2017 pp. Pages 332-338

Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L

Gabriel Giannini de Cunto, Arnaldo Homobono Paes de Andrade, Waldemar Alfredo Monteiro

The paper presents a study of the application of Leak-Before- Break (LBB) concept in a relatively small-diameter high energy reactor coolant line, where it is proposed type AISI 316LN to be used as base material welded with type AISI 316L…

10.3221/IGF-ESIS.41.44

Details: Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L PDF

PDF

Miscellanea Views: 761 Downloads: 329 Vol. 11, No. 42 (2017) September 29, 2017 pp. Pages 337-351

Investigation of mechanical properties of AlSi3Cr alloy

Marialaura Tocci, Annalisa Pola, Lorenzo Montesano, G. Marina La Vecchia, Mattia Merlin, Gian Luca Garagnani

In the present paper, microstructural and mechanical properties of an innovative AlSi3Mg alloy were studied. Particularly, the effect of the addition of Cr and Mn on tensile strength and impact toughness was evaluated. In fact, the…

10.3221/IGF-ESIS.42.35

Details: Investigation of mechanical properties of AlSi3Cr alloy PDF

PDF

Miscellanea Views: 809 Downloads: 440 Vol. 10, No. 35 (2016) December 29, 2015 pp. Pages 306-312

Sub-critical cohesive crack propagation with hydro-mechanical coupling and friction

S. Valente, A. Alberto, F. Barpi

Looking at the long-time behaviour of a dam, it is necessary to assume that the water can penetrate a possible crack washing away some components of the concrete. This type of corrosion reduces the tensile strength and fracture energy of…

10.3221/IGF-ESIS.35.35

Details: Sub-critical cohesive crack propagation with hydro-mechanical coupling and friction PDF

PDF

Miscellanea Views: 842 Downloads: 568 Vol. 10, No. 35 (2016) December 29, 2015 pp. pages 295-305

Influence of joint line remnant on crack paths under static and fatigue loadings in friction stir welded Al-Mg-Sc alloy

Y. Besel, M. Besel, U. Alfaro Mercado, T. Kakiuchi, Y. Uematsu

The influence of the joint line remnant (JLR) on tensile and fatigue fracture behaviour has been investigated in a friction stir welded Al-Mg-Sc alloy. JLR is one of the microstructural features formed in friction stir welds depending on…

10.3221/IGF-ESIS.35.34

Details: Influence of joint line remnant on crack paths under static and fatigue loadings in friction stir welded Al-Mg-Sc alloy PDF

PDF

Miscellanea Views: 1,875 Downloads: 1,164 Vol. 11, No. 39 (2017) December 15, 2016 pp. Pages 263-273

Experimental and numerical study on mechanical properties of aluminum alloy under uniaxial tensile test

O. Daghfas, A. Znaidi, A. Ben Mohamed, R. Nasri

The main objective is to model the behavior of 7075 aluminum alloy and built an experimental database to identify the model parameters. The first part of the paper presents an experimental database on 7075 aluminum alloy. Thus, uniaxial…

10.3221/IGF-ESIS.39.24

Details: Experimental and numerical study on mechanical properties of aluminum alloy under uniaxial tensile test PDF

PDF

Integrity of materials and structures Views: 464 Downloads: 303 Vol. 19, No. 73 (2025) June 4, 2025 pp. 181-199

Experimental test on 3D-printing components for Architectural Restoration

Valentina Tomei, Ernesto Grande, Maura Imbimbo

The paper investigates the use of 3D-printed components made from Polylactic Acid (PLA) for the restoration of architectural and ornamental elements, focusing on architectural/structural components. The material PLA was chosen for its…

10.3221/IGF-ESIS.73.13

Details: Experimental test on 3D-printing components for Architectural Restoration PDF HTML Visual Abstract

Other formats

PDF HTML Visual Abstract Podcast

Fractography and Advanced metallography Views: 581 Downloads: 945 Vol. 15, No. 57 (2021) June 22, 2021 pp. 127-137

Microstructure and Mechanical Properties of Aluminum Cast Alloy A356 reinforced with Dual-Size B4C Particles

J. R. Chandrashekar, M. H. Annaiah, R. Chandrashekar

The paper details the studies carried out on a dual-size particulate composite prepared by stir casting using A 356 aluminum alloy and B₄C powders. Three composite compositions, viz., A356 plus 2% B₄C (44µm size and 105µm size in 1:1…

10.3221/IGF-ESIS.57.11

Details: Microstructure and Mechanical Properties of Aluminum Cast Alloy A356 reinforced with Dual-Size B4C Particles PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 1,121 Downloads: 864 Vol. 11, No. 42 (2017) September 29, 2017 pp. Pages 9-22

Effect of corrosion and sandblasting on the high cycle fatigue behavior of reinforcing B500C steel bars

Marina C. Vasco, Panagiota Polydoropoulou, Apostolos N. Chamos, Spiros G. Pantelakis

In a series of applications, steel reinforced concrete structures are subjected to fatigue loads during their service life, what in most cases happens in corrosive environments. Surface treatments have been proved to represent proper…

10.3221/IGF-ESIS.42.02

Details: Effect of corrosion and sandblasting on the high cycle fatigue behavior of reinforcing B500C steel bars PDF

PDF

Miscellanea Views: 1,225 Downloads: 524 Vol. 11, No. 42 (2017) September 29, 2017 pp. Pages 249-262

Experimental evaluation of steel fiber effect on mechanical properties of steel fiber-reinforced cement matrix

Ali Jadidi, Milad Amiri, Ehsanollah Zeighami

This paper investigates the possibility of combining steel fibers with different weight percentages along with their functions in increasing compressive strength, indirect tensile strength and bending strength. In this study, two types of…

10.3221/IGF-ESIS.42.27

Details: Experimental evaluation of steel fiber effect on mechanical properties of steel fiber-reinforced cement matrix PDF

PDF

SI: Russian mechanics contributions for Structural Integrity Views: 674 Downloads: 409 Vol. 13, No. 49 (2019) June 26, 2019 pp. 201-211

Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K

lev Michailovich Zamaraev, Sergey Smirnov

The paper presents the results of comparative studies of short-term creep in tensile tests of the VT1-0 commercially pure titanium (analogue Grade 2 according to ASTM A485) and the VT5-1 alloy (analogue Grade 6 according to ASTM B265) in…

10.3221/IGF-ESIS.49.21

Details: Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K PDF Visual Abstract

PDF Visual Abstract

Analytical, computational and physical models Views: 568 Downloads: 353 Vol. 19, No. 74 (2025) September 8, 2025 pp. 294-309

Advanced algorithms for early detection of first damage during static tensile tests

Davide D'Andrea, Danilo D'Andrea, Giacomo Risitano, Dario Santonocito

The Static Thermographic Method (STM) involves analyzing the thermal behavior of a specimen subjected to a quasi-static tensile test. The temperature trend, measured by an infrared camera, follows three phases where the first and second…

10.3221/IGF-ESIS.74.18

Details: Advanced algorithms for early detection of first damage during static tensile tests PDF HTML Visual Abstract

Other formats

PDF HTML Visual Abstract Podcast

Structural Integrity and Durability of Structures Views: 715 Downloads: 585 Vol. 16, No. 60 (2022) March 25, 2022 pp. 488-503

PVC failure modelling through experimental and digital image correlation measurements

Najat Zekriti, Fatima Majid, Rajae Rhanim, Ibrahim Mrani, Hassan Rhanim

This paper analyses industrial PVC sheets structural integrity assessment widely used for different ranges of industrial applications. We investigated combined approaches focused on fracture toughness assessment to predict PVC mechanical…

10.3221/IGF-ESIS.60.33

Details: PVC failure modelling through experimental and digital image correlation measurements PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 1,783 Downloads: 985 Vol. 17, No. 63 (2023) December 21, 2022 pp. 122-133

Influence of Quenching Agents on Mechanical, Wear, and Fracture Characteristics of Al2O3 / MoS2 Reinforced Al-6061 Hybrid Metal Matrix Composite (MMCs)

K. R. Suchendra, M. Sreenivasa Reddy, M. Ravikumar

Aluminium (Al) based composites enhance the mechanical and wear behavior by heat treatment. The quenching factors like cooling agent, cooling rate and temperature of cooling are expected to influence the hardness, tensile, and wear…

10.3221/IGF-ESIS.63.12

Details: Influence of Quenching Agents on Mechanical, Wear, and Fracture Characteristics of Al2O3 / MoS2 Reinforced Al-6061 Hybrid Metal Matrix Composite (MMCs) PDF Visual Abstract

PDF Visual Abstract

Advanced Manufacturing and Processing Views: 898 Downloads: 692 Vol. 16, No. 62 (2022) September 22, 2022 pp. 573-584

Effect of friction-welding parameters on the tensile strength of AA6063 with dissimilar joints

Yashwanth Chapke, Dinesh N. Kamble

In this paper, the effect of welding parameters of rotary friction welding between AA6063 and AISI4130 and AA6063 and Copper are investigated. The major influencing parameters considered are upset pressure, friction time and friction…

10.3221/IGF-ESIS.62.39

Details: Effect of friction-welding parameters on the tensile strength of AA6063 with dissimilar joints PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 1,022 Downloads: 806 Vol. 17, No. 65 (2023) June 22, 2023 pp. 257-269

Experimental studies to evaluate tensile and bond strength of Stainless-Steel Wire Mesh (SSWM)

Paresh Patel, Digesh Joshi, Rinkesh Makawana

Structural strengthening is vital to improve the load-carrying capacity partially or severely damaged Reinforced Concrete (RC) elements. Fiber Reinforced Polymers (FRPs) are widely used for strengthening purposes. In this study, use of…

10.3221/IGF-ESIS.65.17

Details: Experimental studies to evaluate tensile and bond strength of Stainless-Steel Wire Mesh (SSWM) PDF Visual Abstract

PDF Visual Abstract

SI: Showcasing Structural Integrity Research in India Views: 561 Downloads: 445 Vol. 13, No. 48 (2019) March 8, 2019 pp. 585-598

In-plane anisotropy in deformation micro-mechanism of commercially pure titanium during monotonic tension and cyclic loading

Atasi Ghosh

In the present investigation in-plane anisotropy in tensile and ratcheting behavior of cold rolled and annealed commercially pure titanium plate has been studied. Flat tensile and fatigue test specimen oriented at 0, 45, and 90 degree to…

10.3221/IGF-ESIS.48.57

Details: In-plane anisotropy in deformation micro-mechanism of commercially pure titanium during monotonic tension and cyclic loading PDF Visual Abstract

PDF Visual Abstract

Fractography and Advanced metallography Views: 1,203 Downloads: 668 Vol. 16, No. 62 (2022) September 22, 2022 pp. 439-447

Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites

M. Ravikumar, Rudra Nail

Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer durability and more such properties. In this study, Al7075, reinforced with nano size SiC - Gr was produced by a stir casting technique and its…

10.3221/IGF-ESIS.62.30

Details: Impact of nano sized SiC and Gr on mechanical properties of aerospace grade Al7075 composites PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 1,300 Downloads: 592 Vol. 16, No. 62 (2022) September 22, 2022 pp. 326-335

The Mechanical properties and statistical analysis of the Charpy impact test using the Weibull distribution in jute-polyester and glass-polyester composites

Tahar Tioua, Djamel Djeghader, Bachir Redjel

In recent years, the use of natural fiber composites to provide a possible replacement for synthetic fiber composites for practical applications has been the subject of several studies. This study deals with the fabrication and…

10.3221/IGF-ESIS62.23

Details: The Mechanical properties and statistical analysis of the Charpy impact test using the Weibull distribution in jute-polyester and glass-polyester composites PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 697 Downloads: 844 Vol. 13, No. 49 (2019) June 25, 2019 pp. 630-642

Coupled identification of the hardening behavior laws and Gurson–Tvergaard–Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen

Mohamed Hadj Miloud, Ibrahim Zidane, Mohammed Mendas

This work is devoted to the application of the micromechanical Gurson-Tvergaard-Needleman (GTN) model to study the ductile tearing of 12NiCr6 steel. GTN model is widely used to describe the three stages of ductile tearing: nucleation…

10.3221/IGF-ESIS.49.57

Details: Coupled identification of the hardening behavior laws and Gurson–Tvergaard–Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 815 Downloads: 473 Vol. 14, No. 51 (2020) December 5, 2019 pp. 215-224

Relationship between microscopic analysis and quantitative and qualitative indicators of moisture susceptibility evaluation of warm-mix asphalt mixtures containing modifiers

Pooyan Farazmand, Parham Hayati, Hamid Shaker, Sajad Rezaei

Given the defects of bitumen in asphalt mixtures particularly exposed to moisture, this study mainly aims to investigate the relationship between qualitative and quantitative results of moisture susceptibility tests on asphalt mixtures…

10.3221/IGF-ESIS.51.17

Details: Relationship between microscopic analysis and quantitative and qualitative indicators of moisture susceptibility evaluation of warm-mix asphalt mixtures containing modifiers PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 1,027 Downloads: 841 Vol. 10, No. 38 (2016) October 3, 2016 pp. Pages 224-230

Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading

Sandip Suman, Alan Kallmeyer, John Smith

Most of the prior studies on the prediction of fatigue lives have been limited to uniaxial loading cases, whereas real world loading scenarios are often multiaxial, and the prediction of fatigue life based upon uniaxial fatigue properties…

10.3221/IGF-ESIS.38.30

Details: Development of a multiaxial fatigue damage parameter and life prediction methodology for non-proportional loading PDF

PDF

SI: Modeling in Structural Integrity Views: 631 Downloads: 381 Vol. 19, No. 71 (2025) October 18, 2024 pp. 151-163

Numerical analysis of 3D printed joint of wooden structures regarding mechanical and fatigue behaviour

Petr Lehner, Přemysl Pařenica, David Juračka, Martin Krejsa

This paper presents numerical models of a 3D printed plastic joint applicable to the connection of wooden structures. The research presented provides a comparison of two alternative solutions for the geometry of the joint and results from…

10.3221/IGF-ESIS.71.11

Details: Numerical analysis of 3D printed joint of wooden structures regarding mechanical and fatigue behaviour PDF HTML Visual Abstract

PDF HTML Visual Abstract

Fatigue and Fracture of metallic alloys Views: 399 Downloads: 214 Vol. 20, No. 76 (2026) February 13, 2026 pp. 169-182

Effects of machining methods on uniaxial tensile properties of 75μm thick 304L stainless steel foil

Lin Wang

Considering the fragility of ultra-thin foil material, the machining methods might bring in undesired and non-neglectable damage, which would affect the uniaxial tensile properties of such material. This presented work systematically…

10.3221/IGF-ESIS.76.11

Details: Effects of machining methods on uniaxial tensile properties of 75μm thick 304L stainless steel foil PDF HTML Visual Abstract

Other formats

PDF HTML Visual Abstract Podcast

Integrity of materials and structures Views: 713 Downloads: 337 Vol. 18, No. 69 (2024) April 17, 2024 pp. 29-42

Optimization of clamshell content for improved properties in bamboo-epoxy composites

Anand K J, Thippeswamy Ekbote

The present study aims to develop a novel hybrid composite by incorporating clamshell as a secondary reinforcing filler into a bamboo-epoxy composite. The primary objective of this hybridization is to optimize the synergistic benefits of…

10.3221/IGF-ESIS.69.03

Details: Optimization of clamshell content for improved properties in bamboo-epoxy composites PDF Visual Abstract

PDF Visual Abstract

Advanced Manufacturing and Processing Views: 1,078 Downloads: 672 Vol. 15, No. 56 (2021) March 28, 2021 pp. 160-170

Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques

M. Ravikumar, R. Suresh, H. N. Reddappa, Y. S. Ram Mohan, C. R. Nagaraja, E. R. Babu

The Al₂O₃-SiC reinforced Al7075 Metal Matrix Composite (MMCs) is fabricated through liquid metallurgical technique. Ceramic particulates were amalgamated into aluminium alloy to achieve improved mechanical properties and wear resistance.…

10.3221/IGF-ESIS.56.13

Details: Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques PDF Visual Abstract

PDF Visual Abstract

SI: Structural Integrity and Safety: Experimental and Numerical Perspectives Views: 962 Downloads: 737 Vol. 13, No. 50 (2019) August 10, 2019 pp. 184-193

Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load

Abdallah Benzaama, Mohamed Mokhtari, Habib Benzaama, Elamine Abdelouahed, Tawfik Tamine, Kouider Madani, Amir Slamen, Mrabet Ilies

The objective of this work is to analyze some geometrical effect to predict the damage of aluminum 2024T3 structure after validate numerical model by experimental test. The mechanical of damage behaviour under tensile tests of several…

10.3221/IGF-ESIS.50.16

Details: Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 1,177 Downloads: 559 Vol. 14, No. 51 (2020) December 12, 2019 pp. 477-485

Microstructural damage evaluation of ferritic-ausferritic spheroidal graphite cast iron

Diego Omar Fernandino, Vittorio Di Cocco, Nicolas Tenaglia, Costanzo Bellini, Francesco Iacoviello, Roberto Enrique Boeri

The goal of this work is to improve the understanding of the relation between the microstructural characteristics of Intercritical Austempered Ductile Cast Iron (IADI) and the damage micromechanisms observed during its tensile loading. The…

10.3221/IGF-ESIS.51.36

Details: Microstructural damage evaluation of ferritic-ausferritic spheroidal graphite cast iron PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 955 Downloads: 0 Vol. 16, No. 61 (2022) June 19, 2022 pp. 244-253

A Study on microstructure, mechanical and fracture behavior of Al2O3 - MoS2 reinforced Al6061 hybrid composite

K. R. Suchendra, Reddy M Sreenivasa, M. Ravikumar

Al composites usage is growing and is gaining importance in aerospace, automotive and marine industries due to their excellent characteristics. Aluminum composites exhibit high resistance to wear and corrosion, possess high strength, offer…

10.3221/IGF-ESIS.61.16

Details: A Study on microstructure, mechanical and fracture behavior of Al2O3 - MoS2 reinforced Al6061 hybrid composite PDF Visual Abstract

PDF Visual Abstract

Fractography and Advanced metallography Views: 1,830 Downloads: 1,061 Vol. 17, No. 63 (2023) December 21, 2022 pp. 289-300

Mechanical, Wear, and Fracture Behavior of Titanium Diboride (TiB2) - Cerium Oxide (CeO2) Reinforced Al-6061 Hot-rolled Hybrid Composites

S. R. Sreenivasa Iyengar, D. Sethuramu, M. Ravikumar

Development of aluminium composites by stircasting technique is an effective method for fabrication of better quality of MMCs. Stircasting technique is one of the most commonly accepted techniques. In this research work, Al6061 / TiB₂+CeO₂…

10.3221/IGF-ESIS.63.22

Details: Mechanical, Wear, and Fracture Behavior of Titanium Diboride (TiB2) - Cerium Oxide (CeO2) Reinforced Al-6061 Hot-rolled Hybrid Composites PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 899 Downloads: 505 Vol. 16, No. 62 (2022) September 22, 2022 pp. 54-63

Investigation of the Effect of Yarn Waste Fibers and Cocamide Diethanolamide Chemical on the Strength of Hot Mix Asphalt

Mehmet Saltan, Gizem Kaçaroğlu, Öznur Karadağ

In this study, conventional bitumen test were performed on bituminous binder modified with Cocamide Diethanolamide chemical at different ratios. According to results of tests, the most suitable additive ratio has been determined as 5%.…

10.3221/IGF-ESIS.62.04

Details: Investigation of the Effect of Yarn Waste Fibers and Cocamide Diethanolamide Chemical on the Strength of Hot Mix Asphalt PDF Visual Abstract

PDF Visual Abstract

Advanced Manufacturing and Processing Views: 592 Downloads: 1,038 Vol. 16, No. 60 (2022) March 25, 2022 pp. 273-282

On the peak strength of 7050 aluminum alloy: mechanical and corrosion resistance

Barbara Rivolta, Riccardo Gerosa, Marco Boniardi, Andrea Casaroli

This work consists of an experimental study on the ageing response and resulting properties of AA7050 plate material. New heat treatments are investigated for achieving a peak-aged temper, as a T6 temper may be said to be, that achieves…

10.3221/IGF-ESIS60.19

Details: On the peak strength of 7050 aluminum alloy: mechanical and corrosion resistance PDF Visual Abstract

PDF Visual Abstract

Search the articles

Search results