Search | Fracture and Structural Integrity

Fracture Views: 746 Downloads: 589 Vol. 17, No. 66 (2023) September 27, 2023 pp. 207-219

Crack identification in plates-type structures using natural frequencies coupled with successful history-based adaptive differential evolution algorithm

Brihmat Chahira, Nasreddine Amoura, Samir Lecheb, Hocine Kebir, Mohamed Abdessamed Ait Chikh, Bassima Tablit

In this study, a new approach, for identification and characterization of straight cracks in plates-like structures, is presented. The finite element method using a commercial software (Abaqus)is coupled with successful history-based…

10.3221/IGF-ESIS.66.13

Details: Crack identification in plates-type structures using natural frequencies coupled with successful history-based adaptive differential evolution algorithm PDF Visual Abstract

PDF Visual Abstract

SI: Failure Analysis of Materials and Structures Views: 699 Downloads: 481 Vol. 16, No. 62 (2022) September 22, 2022 pp. 150-167

Predicting Fatigue Crack Growth Behavior of Coalesced Cracks Using the Global-Local Superimposed Technique

Mohd Shamil Shaari, Sylvia Urai, Professor Takahashi, Mohd Akramin Mohd Romlay

The S-version Finite Element Method (FEM) is known as a global-local superimposed approach that consists of two separate meshes referred to as global and local cracks. The relationship between the energy release rate and the Stress…

10.3221/IGF-ESIS.62.11

Details: Predicting Fatigue Crack Growth Behavior of Coalesced Cracks Using the Global-Local Superimposed Technique PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 620 Downloads: 461 Vol. 15, No. 58 (2021) September 25, 2021 pp. 231-241

Numerical prediction of the ductile damage for axial cracks in pipe under internal pressure

Amina Ismahène Fezazi, Belaïd Mechab, Salem Mokadem, Boualem Serier

This study presents a numerical prediction of the ductile damage for axial cracks in pipe subjected to internal pressure. The three dimensional finite element methods used to evaluate the J-integral. The effect of the external radius (R_ext…

10.3221/IGF-ESIS.58.17

Details: Numerical prediction of the ductile damage for axial cracks in pipe under internal pressure PDF Visual Abstract

PDF Visual Abstract

Analytical, Numerical and Physical Models Views: 624 Downloads: 631 Vol. 15, No. 55 (2021) December 28, 2020 pp. 36-49

On the effect of stiffness/softness and morphology of interphase phase on the effective elastic properties of three-phase composite material

Fedaoui Kamel, Lazhar Baroura, Karim Arar, Hichem Amrani, Mohamed said Boutaani

In the present study, Composite material consisting of an elastic homogeneous isotropic matrix in which are embedded coated elastic isotropic inclusions, widely used in many applications is investigate by homogenization approach coupled to…

10.3221/IGF-ESIS.55.03

Details: On the effect of stiffness/softness and morphology of interphase phase on the effective elastic properties of three-phase composite material PDF VIsual Abstract

PDF VIsual Abstract

Structural Integrity and Durability of Structures Views: 705 Downloads: 525 Vol. 18, No. 67 (2024) December 17, 2023 pp. 337-351

Structural integrity analysis of the pre-stressed concrete dome of the Belgrade fair hall 1

Mirjana Jelić, Aleksandar Sedmak, Boris Folić, Simon Sedmak, Mihajlo Aranđelović, Radomir Folić, Dorin Radu

Belgrade fair hall 1 is well known for its dome, which is still the world largest self-supported construction made of pre-stressed concrete, with its diameter of 106 m. In this paper the Finite Element Method (FEM) was performed to analyze…

10.3221/IGF-ESIS.67.24

Details: Structural integrity analysis of the pre-stressed concrete dome of the Belgrade fair hall 1 PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 970 Downloads: 514 Vol. 12, No. 45 (2018) June 25, 2018 pp. 164-172

Forming Process Analysis of an AA6060 Aluminum Vessel

Gillo Giuliano, Costanzo Bellini, Luca Sorrentino, Sandro Turchetta

This work analyses the results of a simple forming process of an AA6060 aluminium alloy sheet in order to validate the development of a simulation model based on the finite element method (FEM). This work represents the starting point of a…

10.3221/IGF-ESIS.45.14

Details: Forming Process Analysis of an AA6060 Aluminum Vessel PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 930 Downloads: 625 Vol. 17, No. 66 (2023) September 27, 2023 pp. 164-177

Behavior of Zr–1Nb alloy in coarse- and ultrafine-grain states under laser-induced shock wave loading

Dmitry Ledon

The work is devoted to the study of the Zr-1Nb alloy in coarse-grained and ultrafine-grained states under laser-induced shock-wave loading. This material is of interest due to the application for the manufacture of shells for fuel elements…

10.3221/IGF-ESIS.66.10

Details: Behavior of Zr–1Nb alloy in coarse- and ultrafine-grain states under laser-induced shock wave loading PDF Visual Abstract

PDF Visual Abstract

Structural Integrity and Durability of Structures Views: 1,281 Downloads: 857 Vol. 16, No. 62 (2022) September 22, 2022 pp. 304-325

Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch

Kouider Madani, Safaa Chahrazed Djebbar, Nadia Kaddouri, Mohamed El Ajrami, Mohamed Belhouari

The presence of a geometric discontinuity such as a crack or a notch can cause the failure of a structure during its use. Under various mechanical or thermal stresses, a high concentration of stresses can take place at the level of these…

10.3221/IGF-ESIS.62.22

Details: Use of combined CZM and XFEM techniques for the patch shape performance analysis on the behavior of a 2024-T3 aluminum structure reinforced with a composite patch PDF Visual Abstract

PDF Visual Abstract

Advanced Manufacturing and Processing Views: 1,030 Downloads: 597 Vol. 14, No. 52 (2020) February 2, 2020 pp. 25-32

Numerical Analysis and Verification of Residual Stress in T Joint of S355 Steel

Xiangming Wang, Erfu Guo

T joint is a widely used welding form. The welding deformation and residual stress produced during the welding process will affect the integrity and reliability of the structure. In this study, S355 low alloy steel was used as test…

10.3221/IGF-ESIS.52.03

Details: Numerical Analysis and Verification of Residual Stress in T Joint of S355 Steel PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 684 Downloads: 684 Vol. 13, No. 49 (2019) June 26, 2019 pp. 599-613

Stress intensity factors analyses for external semi-elliptical crack for repaired gas-pipeline by composite overwrap under pressure

Djamel Eddine Belhadri, Mohamed Belhamiani, Wahiba Nesrine Bouzitouna, Wahid Oudad

The purpose of this article is to present the stress intensity factors (SIF) solutions for semi-elliptic crack in pipelines under internal pressures, the stress intensity factors are calculated by the three-dimensional finite element…

10.3221/IGF-ESIS.49.55

Details: Stress intensity factors analyses for external semi-elliptical crack for repaired gas-pipeline by composite overwrap under pressure PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 1,439 Downloads: 607 Vol. 13, No. 47 (2019) December 2, 2018 pp. 104-125

Fatigue assessment of welded joints by means of the Strain Energy Density method: Numerical predictions and comparison with Eurocode 3: Numerical predictions and comparison with Eurocode 3

Pietro Foti, Filippo Berto, Stefano Filippi

The main aim of the present work is to investigate the effects of different parameters on the fatigue strength of four different welded details through an energetic approach based on the Strain Energy Density failure criteria. The results…

10.3221/IGF-ESIS.47.09

Details: Fatigue assessment of welded joints by means of the Strain Energy Density method: Numerical predictions and comparison with Eurocode 3: Numerical predictions and comparison with Eurocode 3 PDF Virtual Abstract

PDF Virtual Abstract

Failure Analysis, Case Studies and Forensic Engineering Views: 928 Downloads: 491 Vol. 15, No. 55 (2021) December 28, 2020 pp. 345-359

Using XFEM to Predict the Damage with Temperature of the Steel Pipe Elbows under Bending and Pressure loading

Nourddine Hammadi, Moahmed Mokhtari, Habib Benzaama, Kouider Madani, Abdelkader Brakna, Elamine Abdelouahed

The pipes, during their service, are subjected to accumulated loads such as internal pressure and that of the soil. The latter considerably accelerate their damage. In this work, the bending moment stress of API 5L X70 category steel…

10.3221/IGF-ESIS.55.27

Details: Using XFEM to Predict the Damage with Temperature of the Steel Pipe Elbows under Bending and Pressure loading PDF Visual Abstract

PDF Visual Abstract

Integrity of materials and structures Views: 565 Downloads: 362 Vol. 19, No. 72 (2025) February 8, 2025 pp. 121-136

A digital twin framework with MobileNetV2 for damage detection in slab structures

Huong Duong Nguyen, Huan Nguyen, Xiaohong Gao

In this study, a digital twin framework is proposed for damage detection in a civil structure, which consists of a finite element model, neural networks, model updating methods, and signal processing. To verify the proposed framework, we…

10.3221/IGF-ESIS.72.09

Details: A digital twin framework with MobileNetV2 for damage detection in slab structures PDF HTML Visual Abstract

PDF HTML Visual Abstract

Analytical, Numerical and Physical Models Views: 989 Downloads: 581 Vol. 15, No. 57 (2021) June 22, 2021 pp. 70-81

Behavior of Structural Concrete Frames with Hybrid Reinforcement under Cyclic Loading

Asmaa Sobhy, Louay Aboul Nour, Hilal Hassan, Alaaeldin Elsisi

A substantial amount of work was carried out on the use of fiber-reinforced polymer (FRP) in reinforcing concrete structural elements, which demonstrated considerable inelasticity or deformity through monotonous and fatigue loads. Even so…

10.3221/IGF-ESIS.57.07

Details: Behavior of Structural Concrete Frames with Hybrid Reinforcement under Cyclic Loading PDF Visual Abstract

PDF Visual Abstract

Reliability and Life Extension of Components Views: 812 Downloads: 706 Vol. 13, No. 50 (2019) July 16, 2019 pp. 68-85

Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance: Effect of the composite patch shape on the repair performance.

Mohammed Baghdadi, Boualem Serier, Mokadem Salem, Bouchra Zaoui, Khacem Kaddouri

In this work the finite element method was used to analyse the composite patch shape effect of the repair performance. Unlike all the works done conducted so far in this domain, this work proposed here, takes into account the reducing…

10.3221/IGF-ESIS.50.08

Details: Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance: Effect of the composite patch shape on the repair performance. PDF Visual Abstract

PDF Visual Abstract

SI: Modeling in Structural Integrity Views: 443 Downloads: 303 Vol. 19, No. 74 (2025) September 4, 2025 pp. 217-226

The static and modal analysis of concrete tank filled with water

Alexander Filip, Katarina Tvrda, Mária Minárová

Tanks and reservoirs are structural systems designed for storing various liquids, gravels, granular or other bulk materials. Special attention is usually given to the potable water storage. Regarding the increasing scarcity of clean water…

10.3221/IGF-ESIS.74.15

Details: The static and modal analysis of concrete tank filled with water PDF HTML Visual Abstract

Other formats

PDF HTML Visual Abstract Podcast

SI: New Trends in Fatigue and Fracture Views: 694 Downloads: 451 Vol. 13, No. 49 (2019) June 21, 2019 pp. 568-585

Flexural testing and analysis of full-strain-fields in sandwich composites

Rosa Marat-Mendes, Ricardo Martins, Alexandre Garcia, Luis Reis

The objective of this work was to characterize the full-field flexural behavior of composite sandwich beams. Finite element analysis was used to estimate the behavior of sandwich beams under three- and four-point-bending tests and were…

10.3221/IGF-ESIS.49.53

Details: Flexural testing and analysis of full-strain-fields in sandwich composites PDF Visual Abstract

PDF Visual Abstract

Analytical, Numerical and Physical Models Views: 521 Downloads: 406 Vol. 14, No. 54 (2020) September 23, 2020 pp. 169-181

Numerical analysis of circular and square section concrete filled aluminum tubes under axial compression

Pan Jinlong, Li Guanhua, Jingming Cai

In this paper, the finite element (FE) method was used to investigate the axial compressive behaviors of circular and square concrete filled aluminum tubes (CFAT). Firstly, the simulational results were compared with the experimental…

10.3221/IGF-ESIS.54.12

Details: Numerical analysis of circular and square section concrete filled aluminum tubes under axial compression PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 829 Downloads: 483 Vol. 13, No. 48 (2019) March 5, 2019 pp. 491-502

Innovative geometric design improves the resistance of simple metal / metal lap joint

Mehadjia Bezzerrouki

Bonded assemblies are widely used in many industrial sectors mainly in the aerospace field. Many researches in these domains are focused on evaluating the stresses in the adhesive layer in order to achieve maximum strength and long service…

10.3221/IGF-ESIS.48.47

Details: Innovative geometric design improves the resistance of simple metal / metal lap joint PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 1,320 Downloads: 589 Vol. 6, No. 22 (2012) September 30, 2012 pp. pages 56-68

Contact between the components of a knee prosthesis: numerical and experimental study

D. Cerniglia, T. Ingrassia, L. D’Acquisto, M. Saporito, D. Tumino

The aim of this work is the analysis of the contact area in a knee prosthesis using two different approaches. In particular, the interface between the femoral component and the polyethylene insert has been studied both numerically and…

10.3221/IGF-ESIS.22.07

Details: Contact between the components of a knee prosthesis: numerical and experimental study PDF

PDF

Integrity of materials and structures Views: 709 Downloads: 643 Vol. 18, No. 68 (2024) February 15, 2024 pp. 63-76

Mechanical behavior of fiber-glass plastic with hole pattern using digital image correlation and acoustic emission methods

Elena Strungar, Dmitrii Lobanov, Ekaterina Chebotareva, Yaroslava Kochneva

In this paper, tensile tests of specimens with a pattern of holes made of fiber-glass plastic based on combined epoxy and phenol-formaldehyde resins are carried out in order to study the processes of damage accumulation and tension…

10.3221/IGF-ESIS.68.04

Details: Mechanical behavior of fiber-glass plastic with hole pattern using digital image correlation and acoustic emission methods PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 1,220 Downloads: 973 Vol. 15, No. 57 (2021) June 22, 2021 pp. 331-349

Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading

Andrea Kusch, Simone Salamina, Daniele Crivelli, Filippo Berto

Strain energy density is successfully used as criterion for failure assessment of brittle and quasi-brittle material behavior. This work investigates the possibility to use this method to predict the strength of V-notched specimens made of…

10.3221/IGF-ESIS.57.24

Details: Strain Energy Density as Failure Criterion for Quasi-Static Uni-axial Tensile Loading PDF Visual Abstract

PDF Visual Abstract

SI: Russian mechanics contributions for Structural Integrity Views: 1,005 Downloads: 438 Vol. 13, No. 49 (2019) June 25, 2019 pp. 156-166

Numerical analysis of application limits of Vyalov’s formula for an ice-soil thickness

Maxim Zhelnin, Anastasiia Kostina, Oleg Plekhov, Ivan Panteleev, Lev Levin

Artificial ground freezing is an efficient technique which allows one to sink the mine shafts under complex hydrogeological conditions. The aim of artificial ground freezing is a creation of a temporary wall of frozen soil around the…

10.3221/IGF-ESIS.49.17

Details: Numerical analysis of application limits of Vyalov’s formula for an ice-soil thickness PDF Visual Abstract

PDF Visual Abstract

Integrity of materials and structures Views: 421 Downloads: 301 Vol. 20, No. 75 (2026) October 25, 2025 pp. 179-199

Optimization of austenitic and ferritic steels for deep drawing. Part 2: FEM analyses with damage development.

Andrea Casaroli, Edoardo Scabini, Marco Virginio Boniardi, Riccardo Andreotti, Barbara Rivolta

Deep drawing of sheet metal is a crucial industrial process due to its high productivity and low cost per unit produced. Stainless steels are ideal for this process, given their high deformability compared to other steels. Despite its…

10.3221/IGF-ESIS.75.13

Details: Optimization of austenitic and ferritic steels for deep drawing. Part 2: FEM analyses with damage development. PDF HTML Visual Abstract

Other formats

PDF HTML Visual Abstract Podcast

SI: Characterisation of Crack Tip Fields Views: 837 Downloads: 546 Vol. 13, No. 50 (2019) July 11, 2019 pp. 9-19

Effect of yield stress on fatigue crack growth

Fernando Ventura Antunes, Micael Frias Borges, Pedro Prates, Ricardo Branco, Marta Oliveira

Abstract. Fatigue crack growth (FCG) depends on loading, geometry and also material properties. Since FCG is supposedly linked to crack tip plastic deformation, material’s yield stress, Y₀, is an important parameter. The main objective…

10.3221/IGF-ESIS.50.02

Details: Effect of yield stress on fatigue crack growth PDF Visual Abstract

PDF Visual Abstract

Analytical, Numerical and Physical Models Views: 655 Downloads: 422 Vol. 16, No. 59 (2022) December 22, 2021 pp. 444-460

Numerical study of TRIP transformation in 35NCD16 steel-effects of plate orientation and some criteria

Mounir Gaci, Fedaoui Kamel, Lazhar Baroura, Amar Talhi

This study aims to analyze the effect of thermo mechanical coupling damage in the presence of a phase change (austenite/martensite) in 35NCD16 steel. The impact of increasing mechanical traction load, accompanied by a martensitic…

10.3221/IGF-ESIS.59.29

Details: Numerical study of TRIP transformation in 35NCD16 steel-effects of plate orientation and some criteria PDF Visual Abstract

PDF Visual Abstract

Analytical, Numerical and Physical Models Views: 1,585 Downloads: 1,454 Vol. 15, No. 58 (2021) September 25, 2021 pp. 319-343

Periodic homogenization and damage evolution in RVE composite material with inclusion

Karim Benyahi, Youcef Bouafia, Mohand Said Kachi, Sarah Benakli, Amel Hamri

This work deals with the coupling between a periodic homogenization procedure and a damage process occurring in a RVE of inclusion composite materials. We mainly seek on the one hand to determine the effective mechanical properties…

10.3221/IGF-ESIS.58.24

Details: Periodic homogenization and damage evolution in RVE composite material with inclusion PDF Visual Abstract

PDF Visual Abstract

Analytical, computational and physical models Views: 595 Downloads: 261 Vol. 19, No. 73 (2025) May 11, 2025 pp. 88-107

A study on the crack presence effect on dynamical behavior of higher-order Quasi-3D composite steel-polymer concrete box section beams via DQFEM

Nassim Laouche, Ahmed Saimi, Ismail Bensaid, Mouloud Dahmane, Hassen Ait Atmane

This paper presents a dynamic and critical buckling analysis of the presence of a crack of steel-polymer concrete composite beams modelled using a refined quasi 3D beam theory. The beam model is a hollow steel box section filled with a…

10.3221/IGF-ESIS.73.07

Details: A study on the crack presence effect on dynamical behavior of higher-order Quasi-3D composite steel-polymer concrete box section beams via DQFEM HTML PDF Visual Abstract

Other formats

HTML PDF Visual Abstract Podcast

Miscellanea Views: 813 Downloads: 568 Vol. 13, No. 49 (2019) June 24, 2019 pp. 690-697

Pipeline repair by composite patch under temperature and Pressure loading

Elamine Abdelouahed, H. Benzaama, M. Mokhtari, B. Aour

In this study, the three-dimensional finite element method is used to analyze an API 5L X70 steel cylindrical pipeline subjected to an internal pressure load by calculating the stress intensity factors and the integral J at the peak of…

10.3221/IGF-ESIS.49.62

Details: Pipeline repair by composite patch under temperature and Pressure loading PDF Visual Abstract

PDF Visual Abstract

SI: Portuguese contributions for Structural Integrity Views: 1,173 Downloads: 1,222 Vol. 13, No. 48 (2019) March 10, 2019 pp. 676-692

Stress Intensity Factor Solutions for CTS Mixed Mode Specimen

Fernando Ventura Antunes, Ricardo Branco, José António Martins Ferreira, Luís Borrego

The Compact Tension Shear (CTS) specimen is used to study fracture and fatigue under mixed mode I/II loading conditions. Existing K solution was developed for fracture studies and it does not consider the effect of crack deflection. The…

10.3221/IGF-ESIS.48.64

Details: Stress Intensity Factor Solutions for CTS Mixed Mode Specimen PDF Visual Abstract

PDF Visual Abstract

Miscellanea Views: 1,048 Downloads: 561 Vol. 12, No. 45 (2018) June 16, 2018 pp. 43-66

Fatigue life prediction of 5083 and 5A06 aluminum alloy T-welded joints based on the fatigue characteristics domain

li zou, Xinhua Yang, Jianrong Tan, Hongji Xu, Yibo Sun

Three-point bending fatigue test of 5083 and 5A06 aluminum alloy T-welded joints is carried out, and the fatigue life of the specimens with different influencing factors are obtained. Finite element model of the T-welded joint is…

10.3221/IGF-ESIS.45.05

Details: Fatigue life prediction of 5083 and 5A06 aluminum alloy T-welded joints based on the fatigue characteristics domain PDF Visual Abstract

PDF Visual Abstract

Fatigue Views: 758 Downloads: 642 Vol. 17, No. 66 (2023) September 27, 2023 pp. 17-37

Multi-level Uncertain Fatigue Analysis of a Truss under Incomplete Available Information

Raphael Basilio Pires Nonato

We predict the fatigue life of a planar tubular truss when geometrical parameters, material properties, and live loads are non-deterministic. A multi-level calculation uncertainty quantification framework code was designed to aggregate the…

10.3221/IGF-ESIS.66.02

Details: Multi-level Uncertain Fatigue Analysis of a Truss under Incomplete Available Information PDF Visual Abstract

PDF Visual Abstract

Analytical, Numerical and Physical Models Views: 558 Downloads: 464 Vol. 15, No. 55 (2021) December 28, 2020 pp. 241-257

Research of stress distribution in the cross-section of a bimetallic perforated plate perpendicularly loaded with concentrated force

Mateusz Konieczny, Henryk Achtelik, Grzegorz Gasiak

The paper presents the stress distribution along the plate thickness in a bimetallic steel – titanium circular, axially symmetrical perforated plate produced in the technological process of explosion welding. The steel layer is the layer…

10.3221/IGF-ESIS.55.18

Details: Research of stress distribution in the cross-section of a bimetallic perforated plate perpendicularly loaded with concentrated force PDF Visual Abstract

PDF Visual Abstract

Fracture Views: 604 Downloads: 459 Vol. 16, No. 60 (2022) March 25, 2022 pp. 265-272

Fatigue crack growth analysis of welded bridge details

Danilo D'Angela, Marianna Ercolino

The paper investigates the fatigue crack growth in typical bridge weldments by means of numerical analysis. The extended finite element (XFEM) method is coupled with the low-cycle fatigue (LCF) approach in ABAQUS, and parametric analyses…

10.3221/IGF-ESIS.60.18

Details: Fatigue crack growth analysis of welded bridge details PDF Visual Abstract

PDF Visual Abstract

Fatigue Views: 607 Downloads: 445 Vol. 15, No. 57 (2021) June 22, 2021 pp. 182-194

Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model

Mohammed Bentahar, Habib Benzaama, Mahmoudi Noureddin

The objective of this work is to study the effects of contact parameters on the cracking parameters of a specimen and a pad assembly. These parameters have been studied and evaluated by the finite element method analysis in two dimensions…

10.3221/IGF-ESIS.57.15

Details: Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model PDF Visual Abstract

PDF Visual Abstract

Structural Integrity and Durability of Structures Views: 836 Downloads: 518 Vol. 16, No. 62 (2022) September 22, 2022 pp. 349-363

Beam-like damage detection methodology using wavelet damage ratio and additional roving mass

Juliana C. Santos, Marcus V. G. de Morais, Marcela R. Machado, Ramon Silva, Erwin U. L. Palechor, Welington V. Silva

Early damage detection plays an essential role in the safe and satisfactory maintenance of structures. This work investigates techniques use only damaged structure responses. A Timoshenko beam was modeled in finite element method, and an…

10.3221/IGF-ESIS.62.25

Details: Beam-like damage detection methodology using wavelet damage ratio and additional roving mass PDF Visual Abstract

PDF Visual Abstract

SI: Developments in the fracture and fatigue assessment of materials Views: 900 Downloads: 574 Vol. 12, No. 46 (2018) September 22, 2018 pp. 54-61

A progessive damage fatigue model for unidirectional laminated composites based on finite element analysis: theory and practice

Michael Hack, D. Carrella-Payan, B. Magneville, T. Naito, Y. Urushiyama, W. Yamazaki, T. Yokozeki, W. Van Paepegem

The simulation of the fatigue damage of laminated composites under multi-axial and variable amplitude loadings has to deal with several new challenges and several methods of damage modelling. In this paper we present how to account for the…

10.3221/IGF-ESIS.46.06

Details: A progessive damage fatigue model for unidirectional laminated composites based on finite element analysis: theory and practice PDF Visual Abstract

PDF Visual Abstract

SI: Steels and Composites for Engineering Structures Views: 874 Downloads: 571 Vol. 15, No. 58 (2021) September 25, 2021 pp. 308-318

Evaluating structural safety of trusses using Machine Learning

Tran-Hieu Nguyen, Anh-Tuan Vu

In this paper, a machine learning-based framework is developed to quickly evaluate the structural safety of trusses. Three numerical examples of a 10-bar truss, a 25-bar truss, and a 47-bar truss are used to illustrate the proposed…

10.3221/IGF-ESIS.58.23

Details: Evaluating structural safety of trusses using Machine Learning PDF Visual Abstract

PDF Visual Abstract

SI: Crack Paths Views: 635 Downloads: 443 Vol. 13, No. 48 (2019) March 2, 2019 pp. 348-356

Numerical model of cracking pattern in laminated bamboo specimens under tensile and shear loads

Martín Estrada, Dorian L Linero, Caori P Takeuchi

This work describes a two-dimensional numerical model that allows detecting the appearance of cracks and calculating their propagation in elements made of laminated bamboo, under tension and shear. This composite material has long parallel…

10.3221/IGF-ESIS.48.33

Details: Numerical model of cracking pattern in laminated bamboo specimens under tensile and shear loads PDF Visual Abstract

PDF Visual Abstract

Reliability and Life Extension of Components Views: 924 Downloads: 568 Vol. 15, No. 56 (2021) March 28, 2021 pp. 115-122

Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

Abdelmalek Regad, Djebara Benzerga, Habib Berrekia, Abdelkader Haddi, Nourredine Chekhar

The good management of drinking water begins with a supply network, with a low rate of leakage. Currently, the pipes used in the water transport system are mainly made of polymeric materials, such as HDPE. The corrosion degradation of this…

10.3221/IGF-ESIS.56.09

Details: Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite PDF Visual Abstract

PDF Visual Abstract

Integrity of materials and structures Views: 415 Downloads: 241 Vol. 20, No. 76 (2026) January 2, 2026 pp. 17-30

Guided waves with machine learning for structural health monitoring: transparent features and Monte Carlo confidence

Brazalez Juan, Nabarrete Airton

Reliable discrimination of small damage states under operational variability requires uncertainty aware Structural Health Monitoring. A pipeline is presented that couples guided wave physics with supervised machine learning to classify…

10.3221/IGF-ESIS.76.02

Details: Guided waves with machine learning for structural health monitoring: transparent features and Monte Carlo confidence PDF HTML Visual Abstract

Other formats

PDF HTML Visual Abstract Podcast

Analytical, Numerical and Physical Models Views: 674 Downloads: 541 Vol. 14, No. 53 (2020) July 19, 2020 pp. 187-201

Comparative study of the repair of cracked plates with two different composite patches

Moulgada Abdelmadjid, Zagane Mohammed El Sallah, Sahli Abderahmane, Ait kaci Djafar, Zahi Rachid

The purpose of this study is to analyze the behavior of a crack with and without reinforcement by a composite patch of an aluminum plate in mode I using the finite element method. The repair patch is boron / epoxy and Carbon / epoxy, which…

10.3221/IGF-ESIS.53.16

Details: Comparative study of the repair of cracked plates with two different composite patches PDF Visual Abstract

PDF Visual Abstract

SI: Portuguese contributions for Structural Integrity Views: 771 Downloads: 663 Vol. 13, No. 48 (2019) March 2, 2019 pp. 257-268

Algorithm for automatic fatigue crack growth simulation on welded high strength steels

Ricardo Miguel Gomes Simões Baptista, Virginia Infante, João Marques

Nowadays the demand for high strength steels is increasing. In order to design and develop high performance products, it is essential to understand the fatigue behavior of these materials. When considering welded components, the fatigue…

10.3221/IGF-ESIS.48.27

Details: Algorithm for automatic fatigue crack growth simulation on welded high strength steels PDF Visual Abstract

PDF Visual Abstract

SI: Developments in the fracture and fatigue assessment of materials Views: 901 Downloads: 465 Vol. 12, No. 46 (2018) September 23, 2018 pp. 140-149

Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch

Nour Chafak Ibrahim, Serier Boualem, Mechab Belaïd

In this work, we analyze three - dimensionally, by the finite element method, the performance of the repair of aeronautical structures damaged by cracking and repaired by patch of composite materials. The effect of crack-crack interaction…

10.3221/IGF-ESIS.46.14

Details: Analysis of the crack-crack interaction effect initiated in aeronautical structures and repaired by composite patch PDF Visual Abstract

PDF Visual Abstract

Reliability and Life Extension of Components Views: 770 Downloads: 656 Vol. 16, No. 61 (2022) June 19, 2022 pp. 327-337

Composite lay-up configuration effect on double and single sided bonded patch repairs

Toufik Achour, Fayçal Mili

Understanding the failure modes of damaged or cracked structures and repaired by bonding a composite patch is an essential point to improve its resistance to failure and subsequently extend its service life. In the present study, a 3D…

10.3221/IGF-ESIS.61.22

Details: Composite lay-up configuration effect on double and single sided bonded patch repairs PDF Visual Abstract

PDF Visual Abstract

SI: Structural Integrity and Safety: Experimental and Numerical Perspectives Views: 668 Downloads: 544 Vol. 14, No. 51 (2020) October 17, 2019 pp. 52-70

Evaluation of the dynamic response of structures using auxetic-type base isolation

Georgios Drosopoulos, Preyolin Naidoo

Base isolation is a widely-used method used to minimise the harmful effects of earthquakes on buildings. Unlike a fixed base building, a building with a base isolation system essentially decouples the superstructure from the substructure…

10.3221/IGF-ESIS.51.05

Details: Evaluation of the dynamic response of structures using auxetic-type base isolation PDF Visual Abstract

PDF Visual Abstract

Search the articles

Search results